Triarch Indoor Lighting 31633 User manual

Assembly Instructions
ITEM NO.:31633
1. Thread the LOOP (A) onto the NIPPLE (B). Until tighten!
2. Unfold the arms to the correct place to match the FRAME (I).
3. Thread the NIPPLE (H) onto COUPLEN (G). Until tighten!
4. Place the FRAME (I) onto the fixture careful. Make sure all of the NIPPLE (H)
hade insert the tubings on the FRAME (I).
5. Place the COVER (J) onto the FRAME (I). Then secured by the BALL NUT (K).
6. Measure the height from hanging fixture to your ceiling. Cut the excess chain
and wire to fit the height.
7. Follow the wattage label on the glass hold and install correct wattage and type
bulb (no provide) onto the socket.
8. For mounting and wiring step please follow the mounting instruction sheet
enclosed.

Assembly Instructions
ITEM NO.:31633/31634
PICTURE1 PICTURE2 PICTURE3
PICTURE4 PICTURE5 PICTURE6 PICTURE7
STEP-BY-STEPASSEMBLY GUIDE
1. CAREFULLY REMOVE FIXTURE OUT OF THE BOX.(PICTURE 1)
2. THREAD THE LOOP ONTO THE NIPPLE ON THE FIXTURE.
.PUT THE BOTTOM FRAME ON TOP OF A PIECE OF CLOTH OR CARPET AND AVOID ANY
S.(PICTURE 2)
TURE 3)
HOWN.(PICTURE 4)
7. PPLE AND FRAME WITH BOTTOM CAPAND BALL NUTAS SHOWN.(PICTURE 6)
XTURE ASSEMBLY IS COMPLETED.(PICTURE 7)
3SCRATCHES ON THE FIXTURE
4. SPREAD OUTANDADJUSTARMS EVENLY ON THE FIXTURE.(PIC
5. TREAD THE NIPPLE ONTO THE BOTTOM OF EACHARM AS S
6. CAREFULLY INSERT THE NIPPLE INTO EACH TUBE ON THE FRAME.(PICTURE 5)
SECURE NI
8. FI