Triarch Indoor Lighting 31904 Quick start guide

ASSEMBLY AND MOUNTING INSTRUCTION
For 31904
Please read the Assembly lnstruction sheet carefully before proceeding.Carefully unpack and
identify all parts prior to building the unit. Each part is identified on the drawingfor reference.
DO NOT DISCARD THE ORIGINAL PACKAGING. If after careful inspection and you must returnthe item
for any reason. Please repack the unit using the original carton and inserts.
STEP 1:Unpack all the parts and Classify them according to
the illustration shown at the side.Place the parts on a scratch free surface;
STEP 2:Make sure the power is turned off at the junction
box where the fixture is to be installed.Secure the cross
bar to the ceiling junction box using junction box screws;
STEP 3:Use the wire nuts to connect the positive
and negative wires.Connect the ground
wire to the junction box ground port;
STEP 4: Secure the canopy to the ceiling
with The knurled ring;
STEP 5:Buckle the Quick Link to the Loop;
STEP 6:InstalL the Loop to the Fixture;
STEP 7: InstaLL the center column to the
Fixture;
STEP 8:Attach the center rod bottom with
Column the bottom cap and finial;
STEP 9:InstalL the glass shades and
secure them with the socket rings and
socket colLars
Same as 31903 insdruchos
STEP 10:InstalL the correct bulbs(not
provided);
Bottom column
Fixture
Knurled Ring
Glass Shade