Triarch Indoor Lighting 31754 User manual

ASSEMBLY INSTRUCTIONS FOR 31754
1. Before beginning the assembly, carefully unpack and identify all parts referring to the illustration.
2. Unravel the power supply and ground wires and pass them through the center holes of column
and fixture loop. Thread the bottom of column to the coupling at the top of fixture body, and then
thread the fixture loop onto the protruding nipple from the top of column. Hand tightens until snug.
3. Thread finial to the coupling at the bottom of fixture body as shown.
4. Install candle sleeve onto the socket.
5. Carefully pass the center hole of glass through the candle sleeve and sit on the socket.
6. Install proper bulbs (not provided) to the sockets referring to the markings and labels on fixture for
maximum wattage.
7. Restore power to the installation point ON. Retain this sheet for future reference.
01/21
IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!
sleeve
Candle
Glass
Finial
Fixture loop
Column
Fixture body