Triplett SBR2M User manual

User Manual
SBR2M
Security Camera Tester Borescope 2M (6.5ft)
8mm Diameter

Introduction
Congratulations on your purchase of the Triplett SBR2M Security Camera
Tester Borescope. This borescope paired with any security camera tester
adds a borescope function to your security camera tester.
Features
•Waterproof (IP67) 8mm camera (Lens only)
•2m cable (6.5ft)
•6 adjustable LEDs with thumbwheel control
•Power provided by the camera tester (12V 1/2/3A) —no batteries
needed
•Connection cables already included with your camera tester
•Utilizes the display resolution of your camera tester
•Image snapshot and Video record functions dependent on camera
tester capability
Safety
This product is designed for industrial inspection camera.
•Avoid severe hits to the camera probe, and do not aggressively
pull the cable.
•Please do not use it under high temperature, high magnetic
environments or under strong light.
•Do not expose this product to extremely low or high temperatures
•If used for extended periods of time, please take out of the Alkaline
battery from the device.
•Do not wipe the unit with corrosive chemical wash.
NOTICE:
WARNING ! This product is an industrial inspection camera and is
not intended for medical use or human examination.

Operation
1. Locate the gender changing cables (for BNC and Power) supplied
with your security camera accessory kit.
2. Install onto the SBR2M.
3. Connect to BNC Video IN and 12/1,2 or 3A Power output on the
security camera tester.
4. Click on Auto HD and the video will be displayed.
5. Follow instruction for taking images and video as you would on
your model camera tester.
**Note: The image below is for Reference Only –The SBR2M is shown being
paired up with the Triplett 8150 CAMVIEW IP PRO 5" FULL TOUCH SCREEN 8MP
HIGH RESOLUTION SECURITY CAMERA**
Part Number –8150-BR-Kit includes (1) SBR2M and (1) 8150.

Specifications
SBR2M
Camera
8mm
Field of View
60°
Depth of View
1.2 to 4" (3 to 10cm)
Cable Length
2m (6.5ft)
Resolution
640 x 480
Illumination
6 adjustable LEDs
Still Image Capture
dependent on camera tester
Video Recording
dependent on camera tester
Power
12V 1/2/3A (provided by camera tester)
Interface
BNC
Dimensions
Camera & Cable: 6.5ft x 0.3” (2m x 8mm)
LED Thumbwheel: 2x0.5x0.25" (51x13x6.4mm)
Weight
5.6oz (159g)
Warranty
Triplett / Jewell Instruments extends the following warranty to the original
purchaser of these goods for use. Triplett warrants to the original purchaser
for use that the products sold by it will be free from defects in workmanship
and material for a period of (1) one year from the date of purchase. This
warranty does not apply to any of our products which have been repaired or
altered by unauthorized persons in any way or purchased from unauthorized
distributors so as, in our sole judgment, to injure their stability or reliability, or
which have been subject to misuse, abuse, misapplication, negligence,
accident or which have had the serial numbers altered, defaced, or removed.
Accessories, including batteries are not covered by this warranty
Copyright ©2022 Triplett
www.triplett.com