Tripp Lite SR42UB1032 User manual

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +[phone]
E-mail: [email protected]
Model #: SR42UB1032
42U SmartRack Premium Enclosure - Thread (10-32) Mounting Holes (includes doors and side panels)
Highlights
42U SmartRack enclosure with doors and side panels
4 interior vertical posts with threaded 10-32 mounting holes
Standard 24" (600mm) width and 42" (1050mm) depth for optimizing floor
space
Ships fully assembled
Massive front to rear ventilation capacity
3000 lb stationary / 2250 lb rolling load capacity
Locking, removable, reversible front and rear doors
Locking, removable side panels keyed alike with doors
Pre-installed casters and leveling feet
Rolls through standard 7 foot doorway
Meets all enclosure requirements towards PCI DSS (Payment Card Industry
Data Security Standard) Compliance
Description
The SR42UB1032 houses 3000 lb of standard 19-inch rack equipment in 42U. Its front and rear pairs of vertical rails have threaded 10-32 mounting
holes that are adjustable in quarter-inch increments from 4 to 37 inches. Adjustment is quick and an easy-view depth index ensures consistent rail
placement without requiring time-consuming measurements. Each rack space within the enclosure is numbered for ready reference.
The SR42UB1032 features a massive front-to rear-ventilation capacity that meets or exceeds server manufacturer requirements. Its integrated
baying tabs make it easy to combine multiple enclosures in rows for data center applications. This enclosure is also compatible with
hot-aisle/cold-aisle configurations.
With its locking, reversible, removable front and rear doors, and locking, removable side panels, the SR42UB1032 provides ultimate equipment
safety. The side panels are half size for ease of removal and reinstallation. The split rear door design allows the enclosure to be placed closer to a
wall. The SR42UB1032 meets all requirements toward PCI DSS compliance.
The top panel of the SR42UB1032 is vented to help remove warm air from the enclosure and draw in cool air by convection. The top panel includes
ports for cable routing, and can be quickly removed without tools. To facilitate cable access, the SR42UB1032 is open-bottom.
All components of the SR42UB1032 are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to
the facility earth ground. The removable front and rear doors feature quick-release ground wires.
To simplify deployment, the SR42UB1032 comes with preinstalled casters that enable it to be easily maneuvered into the desired location, where it
can be secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for moving
the enclosure over long distances.
The SR42UB1032 comes with a 5-year product warranty. As part of the SmartRack family, the SR42UB1032 is compatible with Tripp Lite’s extensive
range of rackmount accessories, enabling you to customize your solution to meet any requirement.
Package Includes
SR42UB1032 Rack Enclosure
(4) side panels
(4) side panel locks
(2) door & side panel keys
Mounting Hardware
Owner's Manual
Features

Ships fully assembled for rapid deployment and roll into place on heavy-duty pre-installed casters (casters are removable)
Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and convenient. The easy-view depth index
ensures consistent rail placement without requiring time-consuming measurements.
Toolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable
managers. Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can
accommodate two vertical PDUs or cable managers side-by-side (four items per enclosure).
Textured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses.
Massive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirements.
Maximum usable internal depth of 37 inches/94 cm (front to rear rail).
Weight ratings of 3000 lb stationary and 2250 lb rolling.
Front door is locking, reversible and removable.
Rear doors are locking and reversible. Split rear door design reduces clearance requirements for service entry allowing the enclosure to be
placed closer to a wall.
Locking removable side panels are 'half size' to make them smaller and lighter improving ease of installation and servicing. Two side
panels per side (4 panels total). Side panels are keyed alike to the front and rear doors.
Built in baying tabs allow enclosures to be combined securely in rows. Center-to-center width can be set at 600mm or 24" to match standard
data center floor tiles.
Leveling feet extend to allow enclosure to be positioned on uneven floors. Levelers are removable.
Compact design allows the enclosure to roll through standard height commercial doorways.
Convenient grounding system. All components are grounded to the enclosure frame which includes multiple connections for facility ground.
Front and rear doors include quick-release ground wires.
Open bottom for cable access.
Top panel has generous cable access holes. Panel can be removed toollessly in seconds without having to disconnect cables first.
Included stabilizing brackets are used for shipment and can be reattached at the bottom of the enclosure frame on the inside or outside of
the rack.
Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) Compliance
Compatibility with airflow optimization accessories as well as cable management accessories.
Specifications
PHYSICAL
Installed whole system
maximum rack depth (inches)
37
Installed whole system
maximum rack depth (cm)
94.0
Installed whole system
minimum rack depth (inches)
4
Rack Height 42U
Shipping Dimensions
(HWD/in)
85 x 26 x 45
Shipping Dimensions
(HWD/cm)
215.9 x 66.04 x 114.3
Shipping weight (lbs) 336
Shipping weight (kg) 151.2
Unit Dimensions (in.) EXTERNAL DIMENSIONS: 78.5 x 23.63 x 43 (HWD)
Unit weight (lbs) 286
Unit weight (kg) 130
Unit Dimensions (cm) 199.39 x 60.02 x 109.22
Color Black
Style Floor Standing

Weight Capacity - Stationary
(lbs)
3000
Weight Capacity - Rolling
(lbs)
2250
Units per Pallet 1
Weight Capacity - Stationary
(kg)
1360.8
Weight Capacity - Rolling (kg) 1020.6
SPECIAL FEATURES
Grounding lug Front and back door frames
CERTIFICATIONS
Certifications UL60950; RoHS; CE
NOM (Mexico) Tested to NOM (Mexico)
Approvals EIA/ECA-310-E
WARRANTY
Product Warranty Period
(Worldwide)
5-year limited warranty
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=5296.
Copyright © 2013 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous
improvement. Specifications are subject to change without notice. Photos may differ slightly from final products.