Tripp Lite SmartRack SR25UBEXPKD User manual

1
SmartRack™Assembly Instructions
Models: SR25UBKD
and SR25UBEXPKD
1111 West 35th Street, Chicago, IL 60609 USA
773.869.1234 • www.tripplite.com
Copyright © 2008 Tripp Lite. All trademarks are the sole property of their respective owners.

2
Parts List
M6x12 M4x8 with
Lock Washer
M5x10
A B C
x24x16
x1 x1 x2 x2 x2
x2
x2 x2 x2 x1
x4
x16
See Owner’s
Manual
Required Tools:
• 5/32” (4 mm) Allen Wrench (Supplied)
• #1 Phillips Screwdriver (User-Supplied)
• #2 Phillips Screwdriver (User-Supplied)
WARNING: The rack enclosure is extremely heavy. Do not attempt to
unpack, move, assemble or install the enclosure without assistance.
Until it has been properly assembled and stabilized, the enclosure is
prone to tipping and could cause property damage and/or personal
injury. Use extreme caution when assembling the enclosure and be
sure to follow all handling and installation instructions. Do not attempt
to install equipment without rst stabilizing the enclosure. Refer to
Owner’s Manual.
Note:“EXP” models do not
include side panels.
#1 Phillips #2 Phillips

3
1
2
step
2
2
2
1
8
2 2
8
step
x2
x4
x4
x4
2-1
2-2
2-3
C
A

4
3
4
step
step
8
8
x4
x4
x4
x4
3-1
3-2
3-3
1
A
C

5
5
step
5678901234567890123456789012345678901234567890
5678901234567890123456789012345678901234567890
x2
5-1
5-2
5-3
8
2
B
x2
The rail attachment points are numbered to help you align each pair of rails at the
same depth. Before attaching the rails using the screws (shown in Step 5-3), make
sure the same number appears in all three windows. Note: Number shown in
Step 5-2 is for illustration purposes only; attach rails at desired depth.

6
5678901234567890123456789012345678901234567890
5678901234567890123456789012345678901234567890
2
1
7-2
7-1
7
step
1
6
step
16
x2
6-1
6-3
x4
2
2
B
6-2
The rail attachment points are numbered to help you
align each pair of rails at the same depth. Before attaching
the rails using the screws (shown in Step 6-3), make sure
the same number appears in all three windows. Note:
Number shown in Step 6-2 is for illustration purposes
only; attach rails at desired depth.

7
8
step
2
1
x2
2
Note: For
“EXP” models,
skip this step.

8
1111 West 35th Street, Chicago, IL 60609 USA
773.869.1234 • www.tripplite.com
Tripp Lite follows a policy of continuous improvement. Product specications are subject to change without notice.
Made in China.
200807010 93-2823