TriTree Handheld Battery Operated Flour Sifter User manual

Handheld Battery Operated Flour Sifter
User Instructions
Contents
In the Package.................................................................................................................................................................................. 1
Product Specifications.................................................................................................................................................................... 1
How to Use........................................................................................................................................................................................1
Care & Warnings.............................................................................................................................................................................. 2
Battery Instructions.........................................................................................................................................................................2
Disposal..............................................................................................................................................................................................2
Troubleshooting...............................................................................................................................................................................3

1 / 4
In the Package
‐Electric Sifter x 1
Product Specifications
‐Power: 2 x Type AA batteries
‐Rotation Speed: 5600 rpm
‐Capacity: 4 Cups / 1 Liter
‐Dimensions: 6.2” x 6.0” x 4.8” / 18.7 x 15.2 x 12.3 cm
‐Diameter: 5.5” / 14 cm
How to Use
1. Unbox the product carefully;
2. Turn over the sifter, make sure the mesh screen is properly installed and the screw fasten tightly, otherwise
the sifter won’t function properly, and may cause extra noises, make sure to repeat this step before every use.
3. Open the battery compartment, insert 2 x AA batteries, and put the cover lid back on, seal it properly;
In case the handle is loose, unfasten the two screws under the Switch button, carefully remove the Switch
module, fasten the screw revealed, install the Switch module back and fasten the two screws. Insert batteries
and put on the cover lid.
4. Fill flour into the sifter, hold the handle horizontally and steadily;
Please put in smaller portions when sifting sugar powders, and keep the sifter low to prevent diffusion of the
powders;

2 / 4
5. Press the button on the handle to turn on the sifter, press again to switch off.
Care & Warnings
‐After each use, remove the mess screen for cleaning. Dry with towel only before reattaching
‐The main body can be washed directly, but NEVER wash or soak the handle where the battery compartment is
into water
‐Be careful when using this product. Do not drop the product
‐This is not a toy, please keep it out of the reach of children
‐Keep children away from the packaging material, beware of the danger of suffocation
Battery Instructions
‐Only batteries of the same or equivalent type as recommended are to be used
‐Batteries are to be inserted according to the correct polarity
‐Non-rechargeable batteries are not to be recharged
‐Different types of batteries or new and used batteries are not to be mixed
‐Exhausted batteries are to be removed from the item, DO NOT dispose of batteries in fire or trash
Disposal
The packaging material is recyclable. We recommend to dispose of the packaging in an
environmentally friendly manner and make it available to the collection service for recycling.
Batteries must be removed and disposed of separately before disposing of the device. To protect
the environment, batteries and rechargeable batteries may not be disposed of together with
normal household waste. Instead they must be turned in at appropriate collection points.
Please dispose of the sifter at a recycling center for used electrical and electronic devices. You can
obtain more information from your local authorities.

3 / 4
Troubleshooting
Issue
Possible Reason
Solution
Device doesn’t work
No Battery installed
Installing 2 x AA batteries
Batteries are installed with
polarities reversed
Batteries must be installed according to correct polarities
Device works weakly,
flour flows slowly
Low battery
Replace batteries
Mesh adhesion or clogged
Clear the mesh screen
Device gets noisy
Mesh screen not fixed
tightly or not in place
Check the mesh, re-install it or fasten the screw
Handle gets loose
Screws of the handle are
getting loose
1. Remove the battery compartment lid;
2. Unfasten the two screws under the Switch button;
3. Carefully remove the Switch module, fasten the screw
revealed;
4. Install the Switch module back and fasten the two screws in
Step 2.