
ASSEMBLY STEP ONE
(4) #12 x 2-1/2"
(4)
ASSEMBLY STEP TWO
1. Insert each of the 4 legs into
the planter by aligning the holes.
2. Place (1) screw with (1) washer
through the pre-drilled holes in
the planter and leg. Fully tighten
the screw.
3. Repeat for remaining (3) legs.
1. Turn the planter upside down and
place the perforated inner plate at
the bottom and the lling tube, bevel
down, in the provided hole.
TROPITONE.COM | 3
GARDEN
PLANTER
SELF-WATERING SYSTEM
1. Ensure the perforated inner plate
and lling tube are in place.
NOTE: You can line the bottom and
the 3 cavities with geotextile cloth
(not included) to reduce the amount
of soil moving through the product.
2. Fill one third of the planter with soil
while ensuring the 3 cavities are lled.
3. Place your plants and ll up with soil
ensuring the lling tube extends out by
approximately 1".