Troy-Bilt 25B-554E011 Guide

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning, and danger labels.
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
Lea el manual de operación anexo sobre ensamblaje e inicio.
778-11111A
25B-554E011
25B-554E711
1
2Tighten rope guide wing nut.
4
3
Starter
Rope
© 2006
Blade control handle
Unfold handle into operating position.
Secure handle by tightening hand knobs.
Hold blade control handle against upper handle.
Slowly slip starter rope into rope guide.
Hand Knobs
1
2
3

IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning, and danger labels.
Need Help?
Call 1-888-TO-HELP-U
Lea el manual de operación anexo sobre ensamblaje e inicio.
8
Pull starter rope with quick, full arm stroke.
If engine does not start after ve pulls,
repeat steps 7 through 9.
9
Set depth blade to highest position.
Depress blade control handle and hold.
Fill tank with gas to within 1/2 inch of top of tank.
Fill engine with entire contents of oil bottle supplied
with your edger.
5
6
Push primer ve times. 7
Oil Fill
Gas Cap
Primer