Troy-Bilt 12AV839N711 Guide

IMPORTANT: READ OPERATOR'S MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning and danger labels.
778-10727A© 2005 Troy-Bilt 12AV839N711
1
2
1
3
2
Lift handle to extended
position. Tighten wing knobs.
Insert carriage bolts and tighten with wing nuts.
Hold blade control handle against upper handle.
Slowly slip starter rope into guide.
Tighten rope guide wing knob.
Secure cable to lower handle with
cable tie provided with unit.
1
2
3
4
Starter Rope
Wing Knobs
Blade Control Handle
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)

IMPORTANT: READ OPERATOR'S MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning and danger labels.
Fill tank with gas to within 1/2 inch of top of tank.
Fill engine with entire contents of oil
bottle supplied with your mower.
Depress blade control handle and hold.
Pull starter rope with quick, full armstroke.
If engine does not start after ten seconds of
repeated pulls, repeat steps seven through nine.
5
6
7
8
9
Push primer fi ve times.
Gas Cap
Oil Fill
Need Help?
Primer
Call 1-888-864-3578