True TUC-27-LP User manual

Specifications subject to change without notice.
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
ROUGH-IN DATA
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366
[phone] • FAX [phone] • [phone] • www.truemfg.com
Parts Dept. (800)424-TRUE • Parts Dept. FAX# [phone]
Model:
TRUE FOOD SERVICE
EQUIPMENT, INC.
Project Name:
Location:
Item #: Qty:
Model #:
AIA #
SIS #
Printed in U.S.A.
APPROVALS:
T RUE R EFRIGERATION
MADE IN
SINCE 1945
U.S.A.
TM
AVAILABLE AT:
TUC-27-LP
TUC-27-LP
Model Doors
Capacity
(Cu. Ft.)
(liters)
Shelves
Cabinet Dimensions
(inches)
(mm)
LD
†H*
Counter
Height HP Voltage Amps
NEMA
Config.
Cord
Length
(total ft.)
(total m)
Crated
Weight
(lbs.)
(kg)
TUC-27-LP 1 6.5
185
227
5/8
702
301/8
766
293/4
756
317/8
810
1/6
1/4
115/60/1
230-240/50/1
3.9
2.9
5-15P
▲
7
2.13
180
82
†Depth does not include 1
" (26 mm) for rear bumpers. ▲Plug type varies by country.
*Height does not include 21/8
" (54 mm) for castors.
12/05
R
Designed using the highest
quality materials and
components to provide the
user with colder product
temperatures, lower utility
costs, exceptional food safety
and the best value in today’s
food service marketplace.
“Low Profile” models are
designed to slide easily under
custom built countertops.
11/2" (39mm) diameter dual
swivel castors. 317/8" (810 mm)
work surface height.
Oversized, factory balanced,
refrigeration system holds 33°F
to 38°F (.5°C to 3.3°C).
All stainless steel front, top,
and cabinet ends. Matching
aluminum finished back.
Attractive, NSF apprived, white
aluminum interior liner with
300 series stainless floor.
Self closing doors. Positive seal,
torsion type closure system.
Entire cabinet structure and
solid doors are foamed in-place
using high density polyurethane
insulation.
Undercounter:
Low Profile Solid Door Refrigerator
ADA & Low Profile Comparison
Standard ADA Low Profile
36" height 34" height 317/8" height
(915 mm) (864 mm) (810 mm)
®
Recessed castor
for “LP” models.

STANDARD FEATURES
Model:
TRUE FOOD SERVICE EQUIPMENT
St. Charles Industrial Center • P.O. Box 970 • O’Fallon, Missouri 63366 • [phone] • FAX [phone] • [phone] • www.truemfg.com
WARRANTY
One year warranty on all parts
& labor and an additional 4 year
warranty on compressor.
(U.S.A. only)
METRIC DIMENSIONS ROUNDED UP TO THE
NEAREST WHOLE MILLIMETER
SPECIFICATIONS SUBJECT TO CHANGE
WITHOUT NOTICE
Model Elevation Right Plan 3D
PLAN VIEW
KCL
ELEVATION
11/2"
(39 mm)
71/16"
(180 mm) 103/32"
(257 mm)
TUC-27-LP TFQY101E TFQY101S TFQY01P TFQY1013
TUC-27-LP
DESIGN
• True’s undercounters are designed
with enduring quality and value that
protects your long term investment.
Our commitment to using the highest
quality materials and oversized
refrigeration insures exceptional food
preservation.
• “Low Profile” models are designed
to slide easily under custom built
countertops.
REFRIGERATION SYSTEM
• Factory engineered, self-contained,
capillary tube system using
enviromentally friendly (CFC free)
134A refrigerant.
• Oversized, factory balanced
refrigeration system with guided
airflow to provide uniform product
temperatures in cabinet interior.
• Extra large evaporator coil balanced
with higher horsepower compressor
and large condenser; maintains
cabinet temperatures of 33°F to 38°F
(.5°C to 3.3°C).
• Sealed, cast iron, self-lubricating
evaporator fan motor and larger fan
blades give True merchandisers a more
efficient low velocity, high volume
airflow design. This unique design
insures colder standard temperatures
and faster recovery in high use
situations.
• Condensing unit access located in
back, slides out for easy maintanance.
CABINET CONSTRUCTION
• Exterior- 300 series stainless steel
top, front and sides with matching
aluminum back.
• Interior - attractive, NSF approved,
white aluminum liner. 300 series
stainless steel floor with coved corners.
• Insulation - entire cabinet structure is
foamed-in-place using high density,
CFC free, polyurethane insulation.
• 11/2" (39mm) diameter dual swivel
castors permit easy placement. 317/8"
(810 mm) work surface height.
DOORS
• Stainless steel exterior with white
aluminum liner to match cabinet
interior.
• Positive seal self-closing door with 90°
stay open feature. Door swings within
cabinet dimensions.
• Door fitted with 12" (305 mm) long
recessed handle that is foamed-in-
place with a sheet metal interlock to
insure permanent attachment.
• Magnetic door gasket of one piece
construction, removable without tools
for ease of cleaning.
SHELVING
• Two (2) adjustable, heavy duty PVC
coated wire shelves 231/4"L x 16"D
(591 mm x 407 mm). Four (4) chrome
plated shelf clips included per shelf.
• Shelf support pilasters made of same
material as cabinet interior; shelves are
adjustable on 1/2" (13 mm) increments.
MODEL FEATURES
• Evaporator is epoxy coated to
eliminate the potential of corrosion.
• NSF-7 compliant for open food
product.
ELECTRICAL
• Unit completely pre-wired at factory
and ready for final connection to a
115/60/1 phase - 15 amp dedicated
outlet. Cord and plug set included.
OPTIONAL FEATURES/ACCESSORIES
Upcharge and lead times may apply.
❒ 230 - 240V / 50 Hz.
❒ Basic overshelf.
❒ Barrel lock (factory installed).
❒ 30" (763mm) deep, 1/2" (13mm) thick,
white polyethylene cutting board.
❒ Additional shelves.
❒ Heavy duty tops (16 gauge).
❒ Standard height units with 5"(127mm)
diameter castors. 36" (915 mm) work
surface height.
❒ ADA compliant models with 34"
(864 mm) work surface height.
❒ Remote cabinets (condensing unit
supplied by others; system comes
standard with 404A expansion valve
and requires R404A refrigerant).
Consult factory technical service
department for BTU information.
115/60/1
NEMA-5-15R
Undercounter:
Low Profile Solid Refrigerator
RIGHT VIEW
279/16"
(701 mm)
2427/32"
(632 mm)
5529/32"
(1421 mm)
301/16"
(764 mm)
21/8"
(54 mm)
1"
(26 mm)
293/4"
(756 mm)
317/8"
(810 mm)
5/8"
(16 mm)