TRUGLO SPEED-SHOT TG140C1G User manual

ANOTHER INNOVATION
FROM TRUGLO
B WFISHING
SPEED•SHOT™ARROW
WITH 360° SLIDE SAFETY SYSTEM
Premium-grade, hardened stainless steel tip
Pivoting barb for quick fish removal and improved penetration
High-visibility fluorescent color
Includes pre-installed nock, slide, and slide stop
250 grain point
Elongated tip improves penetration
Ultra-sharp 5-sided tip
Knurled base for better grip
Waterproof retainer helps tip stay tight
Tempered high-strength stainless steel barb
Removable barb for barbless fishing or target practice
Premium fiberglass shaft
Nock with contoured string groove improves arrow release
Ultra-slim nock diameter improves accuracy
Replacement tips available (item TG146A1)
WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer
and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Richardson, TX www.truglo.com
TG140C1G
Designed in USA | Made in China
ART20B14JL
Patent No. 6,517,453
SPEED•SHOT™ARROW
WITH 360° SLIDE SAFETY SYSTEM
WARNING: TRUGLO®360° arrow slide safety system is only compatible with TRUGLO
bowfishing arrow rests and other circular brush-style rests.
SLIDE SAFETY
SYSTEM
INCLUDED

SPEED•SHOT™ARROW
ARROW POINT INSTALLATION:
1. Tips are very sharp. Please use caution when handling.
2. Make sure the point and arrow are dry and clean.
3. Apply archery epoxy/glue to the non-tapered end of the arrow shaft.
4. Insert the arrow into the point and rotate to evenly spread the epoxy.
5. Press the point firmly onto the arrow and
make sure the point is fully seated.
6. Wipe away any excess epoxy.
Please follow epoxy manufacturer’s
instructions and recommended drying times.
FISH REMOVAL:
1. Use caution, the tip is very sharp.
2. Loosen the tip one turn and rotate
the barb 180° towards the tip.
3. Once fish is removed, rotate the barb back
180° to the retrieval position and retighten the tip.
TIP REPLACEMENT:
1. Use caution, the tip is very sharp.
2. Make sure the waterproof retainer is seated inside the tip.
3. Thread replacement tip onto the point.
Barb
(open position)
Barb
(retrieval position)
Replacement Tip
WARNING:
• Serious bodily injury, death, or property damage can occur if this
product is not installed and used properly.
• It is recommended that a qualified archery technician install and
inspect your equipment prior to use.
• Always inspect arrows and nocks for damage. Discard if cracked,
splintered, or otherwise damaged.
• Always tie the bowfishing line to a properly functioning arrow slide.
• Never tie the bowfishing line directly to the arrow. This can cause the
arrow to snap back at the shooter causing injury or death.
Arrow snapback is caused by the bowfishing line becoming tangled
with the bow string, the cables, the bow, a bow accessory, or
the shooter.
• The arrow slide and bowfishing line must be in front of the arrow rest
and bow riser at all times (on the target side).
• Never allow the arrow slide or bowfishing line to be behind the arrow
rest or bow riser.
• Always check that the bowfishing line is free of knots and debris.
The bowfishing line must be able to freely spool from the reel
when shot.
Always wet the bowfishing line prior to use.
• Always check that the arrow slide can move freely and is
functioning properly.
• Always wear eye protection when using any archery product.