Trust IPCAM-2000 User manual
www.trust.com
IPCAM-2000
WIFI IP CAMERA WITH NIGHTVISION
USER MANUAL
Item 71119 Version 2.0
Visit www.trust.com
for the latest instructions
DE Das Handbuch in Deutsch finden Sie unter trust.com/71119
FR Le mode d’emploi français est disponible sur trust.com/71119
NL De Nederlandstalige handleiding is beschikbaar op trust.com/71119
IT Il manuale in italiano è disponibile alla pagina trust.com/71119
ES El manual en español se encuentra en trust.com/71119
PT O manual em português está disponível em trust.com/71119
NO Den norske brukerveiledningen er tilgjengelig via: www.trust.com/71119
SV Den svenska manualen finns på trust.com/71119
FI Suomenkielinen käyttöopas on saatavissa osoitteessa trust.com/71119
DA Den danske manual er tilgængelig på trust.com/71119
PL Instrukcja w języku polskim dostępna jest pod adresem trust.com/71119
CS Příručka v češtině je k dispozici na webu trust.com/71119
SK Slovenský návod je k dispozícii na trust.com/71119
HU A magyar nyelvű kézikönyv a trust.com/71119weboldalon található
RO Manualul în limba Română este disponibil la adresa trust.com/71119
BG 71119
EL 71119
TR Türkçe el kitabını trust.com/71119 adresinde bulabilirsiniz
RU 71119
SL Priročnik v slovenščini je na voljo na spletni strani trust.com/71119
HR Priručnik na hrvatskom jeziku dostupan je na trust.com/71119
UA 71119
AR 71119
IPCAM-2000
5
COMPATIBILITY
The IP Camera is compatible with the Trust Smart
Home App and the Octopus Control Station
(ICS-2000).
FUNCTIONALITY
IP Camera to monitor your home and loved ones.
from anywhere in the world
WIRELESS RADIO SIGNAL
The WIFI signal passes through walls, windows and doors.
WIFI range: up to 15 m. (optimal conditions).
Read the manual carefully. Failure to follow these instructions can be dangerous.
Incorrect installation will void any warranty on this product.
IPCAM-2000
6
LIFE SUPPORT
Never use Trust Smart Home products for life
support systems or other applications where
failures can have life-threatening consequences.
INTERFERENCE
Other Wifi networks, appliances and electronics
emitting radio frequency can cause interference
which can aect the operation of the IP Camera
negatively. Place the IP Camera as close to
the modem/router as possible for optimal
performance.
REPAIRS
Do not try to repair this product yourself.
The device contains no serviceable parts for the
user.
WATER-RESISTANT
This product is not water-resistant.
CLEANING
Clean this product with a dry cloth.
Do not use harsh chemicals, cleaning solvents or
strong detergents.
HANDLING
Do not drop the device, bump the device
against something or shake it. Rough handling
can damage internal circuit boards and fine
mechanics.
ENVIRONMENT
The product should not be exposed to extreme
heat or cold. This can damage the circuit boards
and batteries or shorten its life.
WARNING
Strangulation hazard. Children have strangled
in cords. Keep the power cord out of reach of
children.
IPCAM-2000
7
1. Connect the power adapter
Connect the included power adapter to the
camera and insert the plug of the power
adapter into a wall socket. The LEDs on the
back will light up and the camera will start up.
The first time the camera starts it can take
up to a minute. When the camera is done
starting up, the power LED ( A) will be lit red
continuously and the WIFI LED ( B) will start
blinking green.
This is a quick installation guide with basic
installation and usage instructions.
Check the advanced manual on
trust.com/71119 for more in-depth information
like:
• Camera settings
• Recording video
• Reset camera
• Push notifications
• Motion detection
1
A
B
IPCAM-2000
8
2. Install App
2.1 Android
Open the Play Store, search for the Trust
Smarthome app and install the app on your
mobile device.
2.2 iOS
Open the App store, search for the Trust
Smarthome app and install the app on your
mobile device.
2.1 2.2
IPCAM-2000
9
3. Register IP Camera
Open the Trust Smart Home App on your
mobile device.
If you own an Octopus Control station
(ICS-2000) press on the picture of the Octopus
Control station, login and go to step 4.1.
APress on the picture of the IPCAM-2000
BPress the CREATE ACCOUNT button.
3
A
B
IPCAM-2000
10
CA screen appears to fill in your account
information. Fill in your name, email address
and a self created password.
DChoose if you want to receive a newsletter
or not.
EWhen all information is filled in press the
NEXT button.
Your account will be registered and the App
will open with above following screen.
C
D
E
IPCAM-2000
11
4.1 Connect to camera with IPhone/
IPad (IOS)
If you are logged in with a Control Station
first press on the IP Camera in the menubar
on the bottom of the screen.
Go to step 4.2 if you are using an Android
device.
APress the + button at the top of the screen
to add a new camera
BA pop-up appears saying you must connect
to the Wifi network of the camera. Press on the
SETTINGS button.
4.1
A
B
IPCAM-2000
12
CGo to your WiFi settings to connect to the
network of the IP Camera
DConnect to the WiFi network of the camera
by pressing on the IPC-H-XXXXX
network. Wait untill the device is connected
with the WiFi network of the camera. (When
asked the default password for the camera
network is 12345678). After connecting to the
network of the camera return to the Trust
Smart Home App.
C
D
IPCAM-2000
13
BFill in a name for the camera and press OK.
APress the + button at the top of the screen.
A
4.2 Add a camera
4.2
B
IPCAM-2000
14
CThe App is now connecting to the camera and is loading a
preview of the video stream.
If no preview is shown of the video stream, try to take
the following steps:
1. Check if the power adapter is connected to the IP
Camera.
2. Check if the LEDs on the back of the camera are on.
For more troubleshooting go to trust.com/71119.
DA preview of the video stream is
shown. Press NEXT.
C
D
IPCAM-2000
15
FThe camera is now connecting to your
home WiFi network, reconnecting with the
App and rebooting. This can take up to two
minutes.
GThe camera is now connected to your
Home WiFi network.
EChoose your Home WiFi network and fill
in the password for this network. Press the
CONFIRM button when done.
E
F
G
IPCAM-2000
16
5. Edit/Delete camera
HThe camera has been added to the list. To
open the video stream press on the name of
the camera.
APress the pencil button at the top of the screen
to EDIT the name of the camera or to DELETE it.
BPress on the name of the camera to begin
editing the name. Press the CONFIRM button when
done.
CPress the DELETE button to delete the camera.
Press the CONFIRM button when done.
H
AB
C
5
IPCAM-2000
17
CPlace the white plastic mounting plate on a
flat surface and screw it tightly using screws.
(Screws with plugs are included). Make sure
the screw holes are not placed in a crack or
a hole.
ALoosen the stand of the camera by
unscrewing it from the foot.
BRemove the white plastic mounting plate
from the camera
6. Mount the IP Camera
3
A
B
C
Metal ring
White plastic mounting plate
6
IPCAM-2000
18
DPress the foot of the camera on the white
plastic mounting plate (The metal ring does
not have to be placed back). Screw the stand
of the camera back on the foot and tighten it.
EIt is possible to rotate the camera up to
~100° degrees.
D
Rotate up to ~100° degrees
E
IPCAM-2000
19
If possible, dispose of this product at a recycling center. Do not dispose of this product with the
household waste. WEEE: Dispose of the device at a recycling centre. More information: www.
trust.com
Warranty
This product is covered by the legal warranty that applies to your country and it begins on the day of
purchase. For additional information, visit: www.trust.com/warranty.
Copyright
The contents of the “User manual” are subject to copyright protection. Without prior written
permission, reproducing or copying is prohibited. Information in these documents is subject to change
without prior notice. Check www.trust.com/71119 for updates.
For support and FAQ go to trust.com/71119
IPCAM-2000
20
Declaration of conformity
Trust International B.V. declares that the
TrusT smarT Home
-product:
model: IPCAM-2000
item number: 71119
intended use: Indoor
is in compliance with the essential requirements and other relevant provisions of the following directives:
EMC Directive (2014/30/EU), Low Voltage Directive (2014/35/EU), ROHS Directive (2011/65/EC), R&TTE
Directive (1999/5/EC). The product is compatible with the following norms/standards:
Manufacturer/Authorised representative,
H. Donker, Procurement Director
Dordrecht, 09 March 2016
ETSI EN301-489-1 V1.9.2 (2011-09)
ETSI EN 301-489-7 V1.3.1 (2005-11)
ETSI EN 300 328 V1.8.1 (2012-06)
EN 62311: 2008
EN 60950-1 :2006+A11 :2009+A1:
2010+A12 :2011+A2 :2013
EN 50581:2012
Trust International B.V.
LAAN VAN BARCELONA 600
3317DD DORDRECHT
NETHERLANDS
www.trust.com
Table of contents
Other Trust IP Camera manuals
