TruYard GE22 Guide

GE22 Edger
Safety, Operations & Maintenance Instructions

2
INTRODUCTION
This manual contains information concerned with safe practices when operating the
machine, safety precautions that are necessary during operation, maintenance
instructions and troubleshooting.
Before operating the machine it is imperative to have read and understood this
manual. The instructions of this manual are intended to be read and followed to
ensure the proper running of the GE22 Edger and the safety of the user.
In the case of sale or transfer of the machine, this manual must be handed over. In
the event that this manual is damaged or lost, the owner must ask the manufacturer
or the former owner for a copy. This manual is to be considered as an integral part of
the machine.
The information conveyed in this manual is reflective of the machine at point of sale.
The manufacturer has the right to modify the machine for technical or commercial
reasons and this does not make the manual unsuitable for use.
The copyright for this manual belongs to the manufacturer. The technical texts,
images and pictures within this manual cannot be published or used, completely or in
part, without written consent from the manufacturer.

3
Contents
INFORMATION ABOUT THE MACHINE..................................................................................................................... 4
INTENDED USE OF GE22 EDGER .......................................................................................................................... 4
MACHINE DESCRIPTION .......................................................................................................................................... 4
IDENTIFICATION OF MAIN PARTS..................................................................................................................... 5
SPECIFICATIONS........................................................................................................................................................ 6
SAFETY PRECAUTIONS ............................................................................................................................................... 7
ACCIDENT PREVENTION MEASURES.................................................................................................................. 7
SAFETY LABELS AND DESCRIPTIONS................................................................................................................ 8
AFTER A PERIOD OF INACTIVITY.......................................................................................................................... 9
OPERATING INSTRUCTIONS..................................................................................................................................... 10
BEFORE USE ............................................................................................................................................................. 10
DURING OPERATION............................................................................................................................................... 10
AFTER USE................................................................................................................................................................. 11
GENERAL MAINTENANCE......................................................................................................................................... 11
ADJUSTMENT OF THE DRIVE BELT ................................................................................................................... 11
CHANGING THE BLADE.......................................................................................................................................... 11
TYRE PRESSURE...................................................................................................................................................... 12
STORAGE.................................................................................................................................................................... 12
CLEANING .................................................................................................................................................................. 12
PARTS LIST.................................................................................................................................................................... 13
WARRANTY POLICY.................................................................................................................................................... 14
MACHINE MAINTENANCE SCHEDULE................................................................................................................... 14
NOTES.............................................................................................................................................................................. 15

4
INFORMATION ABOUT THE MACHINE
INTENDED USE OF GE22 EDGER
The Truyard GE22 Edger is designed to perfectly cut lawn edges for domestic
applications.
MACHINE DESCRIPTION
The GE22 Edgers consists of the following features:
Pneumatic wheels to manoeuvre the machine
A metal frame
A Height Adjuster
An Engine
A 12” blade
A Blade guard

5
IDENTIFICATION OF MAIN PARTS
Pneumatic
Wheels
Frame
Handle
Handle
Height adjuster
Engine
Engine
Blade & Blade Guard
Handle

6
SPECIFICATIONS
GE22
Engine Specifications
Transmission
Engine
Kohler 5.5hp
Belt Drive
V Belt A Section
Engine Type
Petrol
No Load
Starting
Clutch
No
Cutting System
Machine Construction
Blade Size
9”/225mm
Weight
46kg
Number of Blades
1
Chassis
Steel construction
Special Features
Wheels
Pneumatic 200mm
with steel ball bearing
Warranty
Domestic Application 2
years, Commercial
Application 3 Months

7
SAFETY PRECAUTIONS
ACCIDENT PREVENTION MEASURES
1) Ensure that the operator of the machine has read and understood fully this
manual and the engine manual
2) Always wear suitable footwear. Do not use in bare feet
3) Always stop the engine and disconnect the sparkplugs when guards are not in
place
4) Check that items to be edged are free of all foreign debris this includes and is
not limited to nails, wire, ropes etc.
5) Do not allow children to come near the GE22 Edger. Always ensure that the
children are at a safe distance and are well away from the machine
6) Do not put hands whatsoever inside the machine or near the belt or blade while
the machine is running
7) Read the engine manufactures operating instructions carefully. Do not alter
governor settings or over speed the engine
8) Carefully follow the refuelling safety instructions when refuelling the engine:
Always refuel the GE22 outdoors in a well ventilated area
Ensure the engine is turned off and cooled before beginning refuelling
process.
Keep all ignition and heat sources clear of the refuelling area.
If spillage occurs mop up immediately and wait a suitable time so the
fumes disappear
When storing fuel make sure it is in a suitably designed container
(AS/NZS 2906:2001) and it is stored in a cool dry place.
9) Use your GE22 Edger only in daylight when visibility is good
10) When using the GE22 Edger slopes should be treated with caution. Never
aaaaaplace the GE22 Edger on uneven ground
11) Never leave the GE22 Edger unattended whilst engine is running
12) Do not use GE22 Edger in confined spaces with no ventilation
13) It is advisable to wear safety glasses and hearing protection whilst operating
aaaaathe GE22 Edger
14) Always operate with all guards in place
STRICT ADHERANCE TO THE FOLLOWING RULES, PRECAUTIONS
AND SAFETY MEASURES LISTED HERE MUST BE CONDUCTED TO
AVOID THE DANGER OF ACCIDENT AND DAMAGE TO PEOPLE
AND THE MACHINE.

8
SAFETY LABELS AND DESCRIPTIONS
CAUTION –keep hands and feet
away from the discharge and inlet
openings on the machine as this
could cause injury
CAUTION –the operating of the
engine, its maintenance and starting
must be done after having read the
manual to prevent any harmful
incidents and misuse of the engine
from occurring
CAUTION –ensure that the operator
has read and understood this manual
before operating the machine to
prevent injury

9
CAUTION –keep hands and feet
away from openings on the machine
to prevent injury
CAUTION –ensure you or anyone
around you does not touch the hot
muffler after use of the machine to
prevent injury
CAUTION –ensure all guards are
firmly in place and that hands and
feet are kept away from the rotating
blades in the machine to prevent
injury
CAUTION –when operating, make
sure that the operator has fully read
and understood the engine manual,
do so in an open area and only refuel
the machine once cool
AFTER A PERIOD OF INACTIVITY
Ensure the following checks have been done on the GE22 before operation after a
long period of inactivity:
Check that the machine is undamaged and all guards are attached
Check all the mechanical parts of the machine are not rusty and are in working
condition
Ensure that the engine has sufficient oil and fuel
Check all nuts and bolts are tight

10
OPERATING INSTRUCTIONS
BEFORE USE
Before operating the machine it is important to ensure the following to use the
machine to its full capability and to keep the operator and the surrounding area safe.
Make sure that the operator has read and understood how to use the engine as
per the manufacturer’s instructions
Ensure that the oil and fuel in the engine are as per the engines manufacturer’s
instructions
Check that all guards and parts are in place
Ensure that the GE22 is located on flat, even ground and that there are no
people or animals in the vicinity of its working function.
Ensure that the operator has read and understood this manual, including how to
control the machine
Wear the prescribed safety equipment
DURING OPERATION
Once satisfied that the above criteria have been met, turn on the engine as per the
manufactures instructions. Once running:
Oil and fuel engine as per engine manufacturers. Make sure height adjuster is
at the top or highest so the blade does not make contact with the ground. Make
sure the throttle control is at its lowest rev setting. The blade will turn as soon
as the starter is pulled. With the Clutch version the blade will still be at an idle
position until the centrifugal clutch engages. Keep hands and feet at a safe
distance at all times.
When the motor is running gently increase the throttle.
Gently lower the blade to the desired hole setting or depth. There are 7 hole
settings with the bottom hole being the deepest the edger will cut.
Push the edger along the line of garden edge you wish to cut. Take care and do
not hit any foreign objects such as pavement or paving etc. Ensure you are
cutting grass at all times.
When finished edging put the engine back to idle with the throttle control and
turn the engine off at the off switch. Read the engine manufacturers operating
manual to familiarise yourself with turning off the engine. The blade will still be
turning when the engine is idling.
Regularly check tightness of the bolts and nuts on the entire machine. If
anything is damaged replace immediately.