Trylon SuperTitan Guide

LITERATURE PART #5.95.0000.000*
Revision date: April 20h06 **include with all SuperTitan Towers--
INSTALLATION MANUAL
November 2011
August 2014

21 South Field Drive, Elmira, Ontario, N3B 0A6 - Tel: [phone] - Fax: [phone]
Website: www.trylon.com
NEW SUPERTITAN PACKAGING
Trylon TSF and the Stock Products
group are proud to announce a major
innovation for our SuperTitan Tower
packaging. Trylon will no longer use
wood crates to package SuperTitan
sections 1 - 12HD, and their
corresponding foundations. Instead
the section’s tower legs will be used
to create a metal crate, pictured above
(Patent Pending).
Within the tower legs all of the diagonals and sectional hardware will be
nested. Steel end-caps are used seal the ends of the sections. This packaging,
which will be fully implemented over the next few months, has been
rigorously tested to ensure durability and strength in transport and will
protect against the potential for a loss of section parts/hardware. During
testing the new self-contained packaging vastly outperformed the existing
wood crate.
This improved form of packaging will provide the customer with a product
where the packaging material is up to 95.5% lighter and uses 72% less space
in shipping (comparison photos can be seen below). This results in lowered
freight costs and a cost savings to our end customers. This lowered freight
also represents a reduced carbon footprint associated with shipping the tower
material. An additional “Green” benefit is the reduction of waste on site.
Empty crates no longer need to be disposed of as the Steel end-caps can be
easily collected and recycled.
Trylon is extremely proud of our Packaging team for developing an
innovative solution. We hope you the customer enjoy the environmental &
cost benefits from the new design.

SuperTitan Unpacking Manual:
Step 1: Place SuperTitan section on flat, sturdy surface. Check section for any signs of
damage.
Step 2: Disassemble the bolt connection that is connecting the end-cap to the top
section leg.

Step 3: Remove Leg, exposing the section’s hardware on the inside.
Step 4: Carefully remove the section’s hardware, taking care to ensure all parts are
accounted for.

Step 5: Disassemble the remaining bolt connections, and separate the section legs from
the end-cap.
Step 6: Review SuperTitan Installation Manual, Part Number 5.95.0000.000.

Step 7: Recycle End-Cap and Bolt Assemblies.

21 South Field Drive, Elmira, Ontario, N3B 0A6 - Tel: [phone] - Fax: [phone]
Website: www.trylon.com
SuperTitan Manual Update:
Dear Customer;
Thank you for purchasing one of our SuperTitan Towers! Welcome to the Trylon family,
we hope that you enjoy your tower purchase and that this tower meets your expectations
of a high quality product. Ensuring quality in our products is something that Trylon
always strive to achieve and we believe that it shows.
One of the ways we want to help you the customer is to indicate some updates to our
product that are not yet shown in our manual. Please review the below update notes:
1) FOR PAGES 28-41(Dwg#1.620.014-1.620.0029): Sections 2F-
13FHD will now have an additional hole on both sides of the angle at
the bottom of the leg. This additional hole has been added to facilitate
Trylon’s NEW SuperTitan Packaging method. The addition of these
two holes does not in any way affect the structural integrity of the leg.
2) FOR PAGES 17-25(Dwg#1.620.0058-1.620.0066): For Sections #13-
21, all diagonal members now have two bolt holes at either end of the
member. This change has been made to allow for easier installation.
The addition of the second hole does not affect the diagonal’s
structural integrity.
If you ever have a question regarding the above or your tower in general please feel free
to call our office at [phone] or email [email protected] and ask for a
representative from the Stock Products Team. We will gladly answer any questions you
may have.
Thanks for taking the time to review and we hope you enjoy your tower.
Sincerely
The Stock Products Team
Trylon TSF

TABLE OF CONTENTS
DESCRIPTION PAGE
SUPERTITAN® SELF SUPPORT TOWERS
Tower Overview ………….……………………...1
Instruction Sheet ………………………………...2
Section Assembly Drawings / Section 1 - 21 ………………………….….3-25
Top Section Angle Frames/ Top Mount Pipe Kits ……………………………26-27
Short Foundation / Sections 1 – 12HD ………………………...….28-41
Base Feet Template / Sections 1 – 12HD ……………………………….42
Base Feet Template Drawings / Sections 14 - 21 ………………………...….43-50
Revised: April 2006 TABLE OF CONTENTS SUPERTITAN INSTALLATION MANUAL PDF

Pg. #1

Instructions for Tightening of SuperTITAN A325 Grade Bolts Using Turn-of-the-Nut Method

Pg. #3

Pg. #4

Pg. #5

Pg. #6

Pg. #7

Pg. #8

Pg. #9

Pg. #10

Pg. #11