TS 120A 26KVA Max User manual

Smart Changeover
Manual
(120A 26KVA Max)
TRUSMART

DEVICE DESCRIPTION
1
2
1. NEPA light indicator.
2. GEN light indicator.
3. GEN shutdown switch (Press and hold for 5secs to
shutdown GEN).
4. Manual override - When turned ON, it puts the output
on GEN even if NEPA power is restored.
5. GEN start button.
34
5
1

3.
INSTALLATION INSTRUCTIONS
1. Mark positions where you will like to install the device
and mount a meter board on that position and screw the
Smart Changeover on the meter board.
GEN
NB:
Connect wires from the terminal labeled GEN start and
GEN Shutdown in the device to the switch of the gene-
rator start and shutdown respectively.
NEPA OUTPUT
GEN
Start
GEN
Shutdown
2. Connect the wiring of the home to the device as illust-
rated below
GEN Start and Shutdown wire from the GEN should
be connected through a socket and 13A plug so that
the GEN can easily be moved conveniently in the
event of maintenance.
2

24 months warranty
It switches power output from Gen to NEPA and vice versa
It shuts down your Gen automatically when NEPA power is
restored
Built with a switch to shut down your Gen from the comfort
of your room.
Can be used on any type of domestic generator, key starter
or not.
Surge protection to protect your appliances from damaging
Features
Capacity:
120A 26000VA Maximum output.
Precaution:
Not to be placed where water can get to it.
Support Line:
[phone]
www.trusmart.com.ng