ttaf Free Breathing Mask User manual

ELEKTRONIC MASK
User Manual

Please read this manual carefully before
using and keep it in a safe place.

Product Name
Style
Weight
Size
Input Voltage
Working Time
Function
Material
Level
Rated Power
Air Volume
Free Breathing Mask
Headwear
78g
101x97x66 mm
5V
4-6 Hours
Air Filtering
ABS+SILICONE
≥99
0.75 W
5.7-6.9m³/h
:
:
:
:
:
:
:
:
:
:
:
Technicial Specifications

Product Performance and Features
1. Air Cleaner Power System
Micro-motor provides air flow. According to the fluid mechanics principle,
the air will be absorbed from the outside of the filter. 6 times faster air
intake will allow you to breathe comfortably.
2. Filter Protection System
While the micromotor is running, the air is absorbed by the filter. The filter
removes particles smaller than 2.5 microns (PM2.5), dust, bacteria,
exhaust fumes, pollen, etc. filters the substances. This product will enable
people to continue outdoor activities and exercise as usual when the air is
dirty.
Main Base Replaceable Filter Cover

The filter screen is consumables, need to replace regularly. If the PM2.5 index
over 200, the filter can be used 5-8 days. If PM2.5 index less than 200, it can be
used 10-15 days.
When change the filter, first you need to clamp two sides of filter frame, pull the
used filter out, and then put on a new filter.
The contaminated area behind the filter needs to be checked. If the contaminated
area is large, it is time to replace it with a new one.
While changing the filter, be careful not to get the filter wet.
If the mask has not been used for a long time, it is recommended to remove the
filter from the mask and keep it in the package.
1.
2.
3.
4.
5.
Attention Points and Filter Screen Change
Cleaning the silicone pad: Remove the silicone pad from the main body and
clean with water or alcohol. In long-term use, it is recommended to keep it in
boiling water.
Cleaning the one-way valve: The one-way valve is mounted under the mask.
After removing the frame from the mask, you can remove the valve. Clean it
by rubbing it with water or alcohol. In long-term use, it is recommended to
keep it in boiling water.
1.
2.
Product Cleaning and Maintenance

1.
2.
Battery Performance and Features
Battery Disposal
1.
2.
3.
4.
The battery is an explosion proof lithium battery with a polymer soft package.
Explosion proof packaging does not allow heavy metal release.
High energy density and much safer than traditional lithium batteries.
Working temperature: -19 ° C to 60 ° C
Life time: 0.5 ≥ 500 times
1.
2.
3.
Do not disassemble the battery yourself. If you disassemble the battery, the product
will be out of warranty.
The battery may contain substances that pollute the environment, so take it off
when the mask becomes unusable. First you need to turn off the power and remove
the silicone pad. Then remove out the 6 screws with a screwdriver and separate the
compartment, then you can see the battery. You can pull out the power cord and
remove the battery.
Dispose of the battery in accordance with local regulations. Do not dispose of the
battery with household waste.
About the Battery
1.
2.
3.
4.
When use the mask for the first time, we suggest to use the power inside first, then
you can charge it.
When the light turns red, it indicates no charge. Need to charge.
EWhen connect to electricity supply, indicator light will turn red. When the light turns
green, it means fully charged.
The charging voltage is 5V, charging current is 0.5C. Please use the correct power
adapter (5V, 1A) for charging.
Charger Description

1.
2.
3.
4.
5.
6.
7.
8.
Working temperature of the mask: -19 ° C - 60 ° C
Charge the battery at normal room temperature.
When it is not used for a long time, please turn off the mask . We recommended to
charge it every 3 months.
Please keep the mask clean, change the filter regularly.
The mask is not suitable for use in anoxic environments.
The mask cannot be used under water and in high temperature environments. Change
the filter when it gets wet.
The mask should be kept in a cool and dry place.
The mask is not suitable for shared use with others. It is for personal usage
1. Product structure (as shown in the picture)
Notes
Product User Manual
Silicone Cushion
Snap For Silicone Belt
Switch Button
USB Charging Input
One-Way Valve

2. Switch and Shift Adjustment
There are two shifts for adjustment. Press it once to set the normal airflow
rate. Press it a second time and the airflow rate will be stronger. When you
press it a third time, the device will turn off.
Shift Adjustment
Air Volume (m3 / h) Ventilation for human (m3/h)
1. shift-basic wind speed 3,4 Normal 0,36-2,50
2. shift-strong wind speed 5,5 Max. 4,20-5,20
4. Fitting Method
Fasten the silicone belt to mask body snaps, then wear it as pictures shown.
The silicone belts have five holes for adjustment. It can be adjusted according
to your face.
3. Applicable Scope
The free breathing mask is applicable to protect haze, PM2.5, formaldehyde,
pollen, dust, etc. Can be used at outdoor sports, medical place, factories,
construction sites, etc
5. Basic Parameters
Dimensions 101x97x66mm Charging Voltage 5 V
Rated Voltage 3,7 V Rated Voltage 160 MA
Working Time 4-5 h Working Time 2 - 2,5 h

1.
2.
Free exchange within 7 days.
After purchasing the mask, if it does not work, we can replace it with a new one
within 7 days.
One year warranty
One year free repair service is provided after purchasing the mask (starts on the
date the mask is purchased). After the guarantee period ends, we can assist you
for the repair with an affordable fee.
Product name :
Model：
Seller：
Address：
Contact：
After Sales Services

/ttafelectronic
Kavaklı Mh. İstanbul Cd. No:21
Beylikdüzü -İstanbul /TÜRKİYE
Tel
Fax
[phone] (Pbx)
[phone]
:
:
www.ttafmedikal.com