tuact Venom-X4 User manual

User’s manual
Venom
X4
TM
mouse controller combo
Thank you for purchasing Tuact V enomX4TM . Please read this manual before using your
new
V enomX4TM .
Package Includes
. Venom-X4 Game Mouse
. Venom-X4 Left Wand
. Venom-X4 Transceiver
. Joystick thumb rubber cap x 2
. Transceiver Micro USB cable
. PS4/XBox One controller Micro USB cable
. PS4 controller cable Holder
. XBox One controller cable Holder
. Iron weights x 2
. User’s Manual

Introduce to V enomX4
TM
Mouse
Start
Profile Color LED
CPI switch button
Function Key: F(R)
Iron Weight Cover
Wand
Transceiver
Action Keys: L1,L2
Function Key: F(L)D-Pad
L4
Power
Left Joystick/L3 Battery bay
Profile Select Button/
Profile/Power/Data LED
Pair Button
Mouse/Keyboard USB ports External Power Supply Jack:
to 5V charger (option)
Host Micro USB Jack:
to console or PC
Start with V enomX4
TM mouse and wand
Open the Iron Weight cover to put one or two weight to get comfortable mouse weight, to open the cover:
Side Keys:
G4/G5/G6/G7/G8
Controller USB port
Iron Weight
Left up the cover at
the slot to open the
mouse top bay:
Put the weight irons onto the slots or
switch the Mouse CPI:
Press the CPI button to switch the
mouse CPI to 1 of the 3 value
preset in profile, LED on Start
button indicates the corresponding
color.
Power LEDs

Connect V enomX4
TM
Host
Battery
Venom-X4 Wand works with one AA size battery, it can be any type battery, such as 1.2V Ni-CD/Ni-MH recharge-
able, 1.5V carbon zinc and alkaline battery.
Power saving: The Wand will enter into the standby mode automatically after 5 minutes no activities; and will be
switched off after10 minutes to reduce the battery consumption.
Note: The Wand DOES NOT have charging circuitry, it cannot charge battery.
Open the wand battery cover to install the battery :
PC
PS3 XBox360
XBox One/S
Micro USB cable
Depending on the controller connection on
front USB port, Venom-X4 identifies 5
gaming platforms, referred as the follow-
ing modes:
Playstation 3/Playstation 4 Mode (includ-
ing PS4 Slim and Pro);
Xbox360/XBox One Mode (including XBox
One S);
PC Mode.
Plugging in a PS3, PS4, Xbox360, or
XboxOne controller will boot the Venom-X4
transceiver into the corresponding
console mode.
Note that user needs to keep the control-
ler hooking up to Transceiver all the time
during the game play.
Without any controller connected to the
Transceiver gets the Venom-X4 in PC
mode.
Press and hold the Pair button while
plugging in the Venom-X4 transceiver to
PC will enter the Factory mode, this mode
is used ONLY for recover the firmware
code.
PS4/Slim/Pro
External Power Supply:
5V charger (option）
Push in and lift up to open
A PS4 controller and an Xbox One controller USB Micro-USB cable/holder combo
are included in the package. To avoid data connection loose, please install the
holder with the cable supplied when connecting your controller. Refer to the
Cable/Holder installation guide at:
http://www.tuact.com/products/usb-cable-holder

Connection Options
The Venom-X4 Wand works on wireless mode only. Venom-X4 Wand can be connected all the time regardless of
any other device hooked up as long as it is turned on .
User can connect their own 3rd party mouse and/or keyboard to Transceiver .
The connected controller on the Transceiver works only with its own console, cross-platform use is not supported.
Venom-X4 accepts 3 kinds of devices at the same time. 3rd party mouse or Venom-X4 mouse, keyboard and console
controller, only one of each is allowed.
Important Note:
It is not like the previous Venom product, Venom-X4 doesn’t have the Host Select switch, it identify the console
according to the connected controller. Thus, a controller MUST be connected to get Venom-X4 transceiver enter-
ing the proper mode and to process the authorization handshake.
For the XBox360, its original wireless controller will not be functional with Venom-X4 for authorization; user must
get an official wired controller or 3rd party wired XBox360 controller connected to Transceiver to pass the autho-
rization process.
External Power Supply
It is very similar to an USB hub, the power supply for all the devices attached on the Venom-X4 eventually comes
from the host USB port which is limited to maximum 500mA. The controller would need over 200mA power to
charge its battery and the Venom-X4’s circuit consumes 170-250mA, it will pretty much reach the limit of one
USB port power output. Thus when user hooks up a keyboard and mouse onto the Venom-X4, the USB port will
be easily on over-current condition. To resolve this problem, Venom-X4 equipped with a External power supply
port at its back panel as showing below:
If you like to connect a keyboard or 3rd party mouse onto Venom-X4, the external power supply is needed.
User can connect the EXT Power port to another console’s USB port (if it is not in used) or a 5V cell phone
charger by a micro-USB cable (not included in the package).
Important Note:
Some new cell phone charger has 9V or higher voltage fast/quick charging circuit, it would damage the Venom-X4
and your console when 9V is output, please consult your charger manufacturer to make sure it can detect the
standard USB 2.0 device and output 5V instead of 9V.
Tuact and the warranty is not responsible for your console and/or Venom-X4 damage lose caused by using a
non-5V charger.
External Power Supply Port

Setup
Venom-X4 has many settings and the button layout can be adjusted to get the best performance and comfort-
able control. There are two ways to setup and configure the Venom-X4: PC Setup software (Windows) and
Android Setup App.
The PC Setup software is used for off line setup, there are more settings available with it.
The Android App is used On The Fly while user is playing the game.
Venom-X4 can save upto 6 profiles which contain 6 sets of configurations and layouts. You can download other
profiles by Setup software or the Android App.
Venom-X4 Setup software also has the ability to upgrade the Mouse and Transceiver firmware.
The Venom-X4 Setup software can be downloaded from our website at:
www.tuact.com/software/VenomX4-Setup-Installer.exe
The Venom-X4 Android App can be downloaded from our website at:
www.tuact.com/software/VenomX4-App-Installer.apk Or scan the bar code:
Plugging in the Venom-X4 Transceiver to your PC USB port WITHOUT any controller attached, your Windows
PC will identify the Venom-X4 Transceiver and install proper drivers automatically at the first time when you plug
into that USB port. Run the Venom-X4-setup.exe to start your Venom-X4 configuration.
For more detailed instructions about Setup software and Android App, please refer to the Software and App
Instructions, you can download them from our website at:
www.tuact.com/manual/VenomX4-Setup-Instruction.pdf
www.tuact.com/manual/VenomX4-App-Instruction.pdf
Operation
To adjust the mouse tracking resolution, press the CPI button. The LED will light up with the color corresponding
to 1 of the 3 CPI value preset by the Setup Software.
Many of the Venom-X4 settings and functions can be adjusted and turned on/off during game play by the hot
keys.
The chart below lists all the functional key combinations for user’s On the Fly adjustment.
Terms used in the chart:
• F button: Each of the Venom-X4 mouse and wand has a F (function) key,
referred as the F(L) on wand, and F(R) on mouse.
• “+”: The symbol of "+" means press two keys at the same time momentarily
• ADS: Aim Down Sight
• “ ↑↓→← ”: The arrow keys on keyboard

Keyboard On The Fly Hot Keys
Function Operation Result
Mouse speed increase** F12 + Wheel- Up 0.2x/key stroke
Mouse speed decrease** F12 + Wheel- Down 0.2x/key stroke
ADS Mouse speed increase** F11 + Wheel- Up 0.2x/key stroke
ADS Mouse speed decrease** F11 + Wheel- Down 0.2x/key stroke
Auto Firing On/Off F12 + Mouse-left click Toggle Auto firing on/off
Auto firing tap select increase F12 +
→
Burst 2->3->4->continue
Auto firing tap select decrease F12 +
←
Continue-> 4->3->2 burst
Aim Down Sigh Lock On/Off F11 + L Toggle ADS Lock on/off
Swap
Swap Left stick and mouse F11 + W Swap Enable/Disable toggle
Mouse
Speed
Firing
option
Function Operation Result
F(R) + Wheel- Up
F(R) + Wheel- Down
F(L) + Wheel- Up
F(L) + Wheel- Down
Mouse speed increase 0.2x/wheel increment click
Mouse speed decrease 0.2x/wheel decrease click
ADS Mouse speed increase 0.2x/wheel increment click
ADS Mouse speed decrease 0.2x/wheel decrease click
Auto Firing On/Off F(R) + R1 Toggle Auto firing On/Off
Auto firing tap select increase F(R) + R4 Burst 2->3->4->FULL
Auto firing tap select decrease F(R) + R7 FULL-> 4->3->2 burst
Aim Down Sigh Lock On/Off F(L) + L2 Toggle ADS Lock on/off
Swap Swap Left stick and mouse F(L) + L3 Swap Enable/Disable toggle
Switch Mouse CPI CPI button Green->Blue->Red cyclic
Pair Wand to Transceiver F(L) + L4 Enter Pair mode
Mouse
Speed
Firing
options
Mouse
Setup
Pair
Venom-X4 On The Fly Hot Keys
Profile
Select Select settings profile Press Profile button
on Transceiver
Red->Blue->Orange->Cyan->
Purple->Green cyclic
Note: F11, F12, ↑, ↓, →and ←are the function and arrow keys on keyboard.
Anti-recoil compensation increase*
Anti-recoil compensation decrease*
F(R) + Dpad Up
F(R) + Dpad Down 1- 20, -1/Dpad depress
1- 20, +1/Dpad depress
*: Supported on Setup software Ver 2.5.0 and firmware 3.5.0 or newer.
Anti-recoil compensation increase*
Anti-recoil compensation decrease*
F12 + ↑
F12 + ↓
1- 20, -1/key stroke
1- 20, +1/key stroke
*: Supported on Setup software Ver 2.5.0 and firmware 3.5.0 or newer.
**: Hot Keys are changed in Firmware V3.5.0 and newer.
Factory
Mode
Enter the Transceiver factory mode
Enter the Mouse Facotry mode Hold the R3 to
plugin to PC
Hold the Pair button
to plugin to PC
Red-Blue-Green flashing cyclic
Red-Blue-Green flashing cyclic

Firmware
Pair the Wand to Transceiver
Users can upgrade the Venom-X4 Transceiver and Mouse firmware. To find and upgrade the firmware, please
run the Setup software, the Setup software can find and notify the latest firmware for both the Venom-X4
Mouse and Transceiver automatically. User can then download and upgrade in the Setup software.
User can also save the firmwares to PC as backup or reload firmware backup from PC to upgrade locally.
We release new firmware from time to time whenever adding new functions or fixing bug. You can also check
our website at www.tuact.com for detailed information and update history.
Venom-X4 wand needs to be paired to the Transceiver because it only talks to one Transceiver.
Please note that the Firmware upgrade and Setup software configuration DO NOT change the pairing, Tuact
factory always pair them before it was shipped. Users DO NOT need to pair the Wand unless in the following
cases:
1. Any of the Wand or Transceiver is defective and users received the replacement which was not paired
previously.
2. Try to connect the Wand to another Transceiver.
LED Display
Venom-X4 Mouse LEDs
Red – Current mouse CPI is at high preset value
Blue – Current CPI is at medium preset value
Green – Current CPI is at low preset value
Note: CPI value is pre-set by the Setup software, the Android App doesn’t support
mouse setup
Transceiver Multi-function LED
Solid Red – Powered on, Red profile is in use
Solid Green – Powered on, Green profile is in use
Solid Blue – Powered on, Blue profile is in use
Solid Orange – Powered on, Orange profile is in use
Solid Cyan – Powered on, Cyan profile is in use
Solid Purple – Powered on, Purple profile is in use
Flashing Blue – In WiFi mode.
Solid White – Powered on in PC Mode
Color Burst Blinking – Registered data is received from wand, mouse and keyboard
Color Fast Flashing – In pair mode and waiting for pairing wand.
Venom-X4 Wand LED
LED solid On – Power on and connected to the Transceiver;
LED fast flashing – In pair mode and searching Transceiver.
LED rolling – The wireless connection is lost, and searching Transceiver

Mouse
Max Tracking Speed: 250 IPS
Max Acceleration: 50g
Polling Rate: 125 - 1000Hz (8ms – 1ms)
Frame Rate: 12000 FPS (Max)
Resolution: 500-12000 CPI
Lift up detection: 0.5 - 3mm
Buttons: 12(11 action, 1 Function)
Weight: 115g – 130g adjustable
Wand
Wireless: 2.4GHz ISM band frequency hopping
Buttons: 10 (9 action, 1 Function)
Joystick: 4 way analog
Weight: 95g with battery
Transceiver
Wireless: 2.4GHz ISM band frequency hopping
WIFI: 2.4GHz IEEE802.3 WIFI
USB port: Front: 3; Back: 2
Host platform: PS4/PS4 Slim/Pro, PS3, XBox360, XBox One/XBox One S and PC
Support devices: USB mice/keyboards, Apple keyboard; PS4/PS3 controller,
XBox One controller, and XBox360 wired controller
Profile memory: 25 (6 for each console platform, 1 for PC platform)
Specifications
Warranty
Venom-X4 is warranted to the ORIGINAL purchaser for the normal intended use for a period of one year from
the date of purchase.
If a defect covered under this warranty occurs, please contact your local distributor where you purchased the
product from.
Note: Tuact Corp. DO NOT manage the warranty service, and DO NOT replace the defectives directly to
users.
Technical Support
1. Visit our web site at: www.tuact.com/support.html
2. Basic technical support from retail seller.
3. Post message on Tuact forum, our tech team would get your question answered online.