Tubo ROBO TR800 User manual

INSTRUCTION MANUAL
ROBÒ TR800 ROBOT VACUUM CLEANER
AND FLOOR MOP
Version translated from the original
EN - WARNING: READ THE INSTRUCTIONS BEFORE USE

ROBÒ TR800 Instruction Manual
ENEN
2
We welcome you to the world of ROBÒ, your
trusted assistant!
We are delighted that you have chosen the
quality of Aertecnica to keep your home or
workplace clean.
Since 1985, we have been striving to offer
you the nest technological solutions so that
you can inhabit your daily living spaces in the
best and, above all, healthiest way possible.
Controlling the dust in your environment
correctly ensures that you breathe healthy air
every day. This is why we have created the
TUBÒ system, of which ROBÒ is a precious
ally.
To obtain all the cleanliness you desire, we
recommend reading this manual. Don’t
worry, it will only take a few minutes. Your
TR800 ROBÒ is silent, powerful… and full of
resources that you’d never imagine.
Contact us to express your opinion on TUBÒ
ROBÒ. We are a dynamic company and value
your opinion so that we can improve our
products.
Our team will be pleased to receive your
comments and will use them to make ROBÒ
even more efcient. What we do is tailored to
the needs of your daily life.
Thank you again for choosing us!
Aertecnica S.p.A.
to access the area dedicated to the
TUBÒ ROBÒ app for Android and iOS
platforms
VISIT
www.aertecnica.com
SCAN THE QR CODE
GENERAL INFORMATION
3 Safety and intended use
3 Battery and charging
4 Warranty
4 Registering the warranty on-line
4 Material provided
5 Description of the components
INSTALLATION
6 Installing the charging dock
6 Installing the automatic charging base
7 Charging the battery
7 Tips for use
CLEANING PROGRAMMES
8 Smart
8 Follow the wall
8 Spot
ROBÒ CONTROL MODES
8 Operation with the push-button panel
9 Operation with the TUBÒ ROBÒ app
9 Operation with the remote control
CLEANING MODES
10 Dust removal
10 Floor washing
CONTENTS OF THE MANUAL
for useful information on how to use
and maintain TUBÒ ROBÒ
Tutorial area
ROUTINE MAINTENANCE
11 Routine maintenance schedule
11 Cleaning the dust container
12 Cleaning/replacing the lters
12 Cleaning/replacing the brushes
13 Cleaning the sensors and casters
13 Tank with water dispenser
14 Troubleshooting
15 ROBÒ disposal
16 Technical assistance
activate the warranty for your
ROBÒ straight away
(valid for Italy only)
REGISTER THE WARRANTY
ON-LINE on www.aertecnica.com

ROBÒ TR800 Instruction Manual
ENEN
3
• Read the following manual before using
ROBÒ. Observe all the instructions on safety, use
and maintenance. Store this manual for future
reference. Observe all the audio warnings uttered
by ROBÒ, besides the advice concerning the
battery and the charging dock.
• ROBÒ must not be used by children aged 8
years or younger and by persons with reduced
physical, sensory or mental abilities. Non-expert
or untrained persons may only use ROBÒ if
supervised by a person responsible for their
safety.
• This robot is not a toy. Supervise or keep away
small children and domestic animals when ROBÒ
is operating.
• Do not leave the robot’s electrical parts, battery
or charging dock exposed. Make sure that the
domestic mains voltage matches the rated voltage
of the charging dock supplied.
• ROBÒ was designed exclusively for being used
in indoor domestic environments. Do not use
ROBÒ to collect burning materials or ash.
• Do not use ROBÒ to vacuum liquids, detergents,
solvents or other chemical substances, except
those indicated in the “Routine maintenance”
chapter. Do not use the tank with the water
dispenser and the micro-bre cloth to clean rugs.
GENERAL INFORMATION
SAFETY AND INTENDED USE
• Before using the robot, collect fragile objects,
garments, clothing and shoes, newspapers and
magazines, ribbons, strings and curtains from the
oor, as they could hamper or prevent the regular
cleaning cycle of ROBÒ.
• Do not leave power cords running along the
oor or any objects connected to them that could
by dragged by ROBÒ or damaged by tipping over
or falling.
• Do not place anything on top of ROBÒ –
neither objects nor animals.
• Do not spray or pour liquids on ROBÒ.
• If there is an access to a balcony in the cleaning
zone, use the virtual magnetic barrier to prevent
the robot from entering it and thus guarantee its
safe operation.
•ROBÒ does not contain any components that
can be repaired by the end user.
•For technical assistance requests, send an
e-mail to [email protected] (for Italy only) or
to the authorised foreign retailer.
• Only use the original battery charger to charge
ROBÒ. The product cannot be used with any other
type of charger. The use of other battery chargers
will immediately void the warranty.
• If the charger has a damaged cord or plug, it
must be replaced with an original spare part.
• Only use original batteries for ROBÒ TR800.
• The charging dock must only be installed
in environments protected against rain or
thunderstorms.
• In case of thunderstorms, protect the charging
dock against current overloads.
• Never touch the charging dock with wet hands.
• Make sure that the voltage of the domestic
power network matches the rated voltage of the
battery charger supplied.
• Move ROBÒ from the charging dock before
performing cleaning and maintenance.
• Prior to each use, check the battery and
verify whether there are any signs of damage
or leakage. Do not charge batteries that are
damaged or show signs of leakage.
• The battery must be removed before disposing
of ROBÒ.
BATTERY AND CHARGING
• Do not place the battery near sources of heat.
• Do not immerse the battery in a liquid.
•Technical assistance must be carried out by
authorised personnel. ROBÒ does not contain any
components that can be repaired by the end user.

ROBÒ TR800 Instruction Manual
ENEN
4
Warranty conditions for Italy
AERTECNICA guarantees ROBÒ TR800 for a period
of 24 months starting from the documented
(invoice or tax receipt) date of purchase.
If there is no documentation proving the purchase
date, the 24-month period will refer to the date
on which ROBÒ TR800 was sold by AERTECNICA.
The warranty conditions are those envisaged in
the current legislation of the European Union
(EU).
For any dispute, the Court of Forlì-Cesena (ITALY)
shall have exclusive jurisdiction.
Warranty conditions for EU countries
In European Union countries, the legal warranty
shall be granted by the importing company.
Warranty conditions for non-EU countries
For countries outside of the European Union,
the warranty shall be granted by the importing
company and the warranty conditions are those
envisaged in the law of the country to which the
product is imported.
WARRANTY MATERIAL PROVIDED
After opening the packaging, check that the following components – all supplied with ROBÒ – are present:
The original packaging must be kept in case
the product must be shipped to the Technical
Assistance Service or to exercise the right of
withdrawal.
PLEASE NOTE
ROBÒ TR800
ROBÒ
ACCESSORIES
SPARE PARTS
charging dock
tank with water dispenser
edge-sweeping side brushes
oor mop brush cleaning
comb delimitation magnetic
barrier
HEPA lter sponge lter
charging dock charger

ROBÒ TR800 Instruction Manual
ENEN
5
DESCRIPTION OF THE COMPONENTS
Charging dock charger Volts (VAC) AC 100–240 V DC 24–1 A
TR800 motor power Watts (W) 25
Frequency Hz50/60
Lithium battery mAh 2600
Height cm 8.5
Diameter cm 35
Sound power level** dB <65
TR800 charging system automatic, via the charging dock
Dust container emptying
automatic, via the self-cleaning base
manual, by extracting the container
Compatibility with operating systems iOS | Android
Compatibility with voice assistance devices Amazon Echo Google Home
Voice messages In English only
** in conditions of maximum suction during oor cleaning
ROBÒ SPECIFICATIONS
Charging indicator light
220 V battery charger
Connector for
connecting the
self-cleaning base
Connector for
connection to
charging dock
Charging contacts
Sensor for
communication
with ROBÒ
Main brush with air ow ring
Side sensor
Edge-sweeping side brushes
Collision guards and sensor
Main brush cover
Front swivelling wheel
Rear wheel with
shock absorber
Contacts for battery charging
VIEW FROM BELOW
VIEW FROM BELOW
Suction channel
Micro-bre oor
cloth (MOP)
HEPA lter
Container opening lever
Sponge lter
Primary lter
Filter
compartment
ap
Dust container
deector
Dust container
Filter compartment
Tank with water
dispenser
ROBÒ push button panel ROBÒ charging dock
VIEW FROM ABOVE
Green LED on - power present
LED off - no power
Anti-fall sensors
Anti-fall sensors
Anti-fall sensors

ROBÒ TR800 Instruction Manual
ENEN
6
INSTALLATION
INSTALLING THE CHARGING DOCK WITHOUT THE SELF-CLEANING BASE
INSTALLING THE CHARGING DOCK WITH THE SELF-CLEANING BASE
Position the charging dock at least 100 cm
away from stairs, empty zones and walls,
so that ROBÒ can leave the charging dock
freely.
Make sure that the oor is at and that the
rear part of the self-cleaning base on which
the robot is inserted touches the wall.
Make the electrical connection to power the
charging dock as shown in the picture.
DOMESTIC ENVIRONMENTAL CONDITIONS
For optimal results, the temperature of the
domestic environment must be between 10°C and
40°C.
Prevent direct sunlight from reaching the charging
dock as it may interfere with the communication
and hamper the regular operation of ROBÒ.
PLEASE NOTE
Connect the self-cleaning charging base to the
central vacuum unit.
(Instructions for installing the self-cleaning charging
base to a central vacuum unit)
In this solution, the self-cleaning base is connected to a central vacuum unit to eliminate the
dust collected by ROBÒ without the user’s direct intervention.
vacuum socket
CONNECTION DIAGRAM
oor
self-cleaning base
dust vacuum line
connected to the
central vacuum unit
charging dock
protective cover
vacuum socket
self-cleaning base interface with the vacuum socket
ROBÒ
domestic power
supply
recommended
distance
100 cm
recommended
distance
100 cm
recommended
distance
100 cm
recommended
distance
100 cm
recommended
distance
100 cm
ACTIVATING / DEACTIVATING THE AUTOMATIC SELF-CLEANING FUNCTION
The self-cleaning function can only be performed with the self-cleaning base.
To disable this setting, move ROBÒ off the self-cleaning charging base and
simultaneously press and hold for 3 seconds the button and the front
collision guard, or disable it via the TUBO’ ROBÒ app.
recommended
distance
100 cm
CONNECTING THE CHARGING
DOCK TO THE POWER SUPPLY
domestic power
supply

ROBÒ TR800 Instruction Manual
ENEN
7
CHARGING THE BATTERY
FIRST ROBÒ CHARGE
LOW BATTERY LEVEL
TOTAL CHARGING TIME
When charging ROBÒ for the rst time, place it
on the charging dock until the battery is fully
charged.
Once charging terminates, the ashing blue light
on the push-button panel becomes steady.
FLASHING BLUE LIGHT
Charging in progress
STEADY BLUE LIGHT
Charging completed
STEADY RED LIGHT
ROBÒ flat
WARNING
Leave ROBÒ to charge on the charging dock
until the ashing blue light turns off.
STAND-BY
BATTERY REPLACEMENT
Once ROBÒ has been fully charged, it enters the
STAND-BY mode.
To reactivate ROBÒ, press the button for
1second.
TIPS FOR USE
For improved cleaning efciency, inspect the areas involved beforehand and prepare them as follows:
• Clear the surfaces of the home from any obstacles that can be struck during cleaning, move any objects
lying in the way such as electrical cables, shoes, handbags with straps, magazines and newspapers, remove
light rugs, vases and fragile furnishings, toys scattered on the oor, place chairs above the tables, raise
curtains or sofa covers with fringes touching the oor, and lift bowls for pet food.
• Be careful with objects in precarious balance that can be struck by the robot directly or indirectly. Check
that any open doors are not closed after colliding with ROBÒ, blocking the latter inside the room and
preventing it from returning to the charging dock.
• ROBÒ performs its cleaning cycle regularly even if domestic animals are present. Any zones of the home to
be excluded from ROBÒ’s path can be delimited using the magnetic barrier accessory (supplied).
If the battery level is below 20%, ROBÒ will not
be able to function.
In such case, it must be placed manually on the
charging dock and left there until the battery
charges fully.
If the battery is completely at, it may take
roughly 2 hours to charge completely.
Lithium batteries constitute special
solid waste that must be disposed of
according to the applicable regulations.
If prolonged periods of non-use are expected,
charge the battery fully, remove it and store it in
a cool and dry place.
PLEASE NOTE
When the battery is exhausted, it must be
replaced with a new original one. The instructions
for replacing the battery are included in the spare
part’s package.
AVOID
RECOMMENDED
delimitation
magnetic barrier

ROBÒ TR800 Instruction Manual
ENEN
8
200 cm
Spot
CLEANING PROGRAMMES
After it starts, ROBÒ automatically calculates the
optimal cleaning route by choosing which path to
take to cover all the accessible rooms.
ROBÒ travels through and cleans all rooms of the
home without leaving any uncovered patches,
guaranteeing thorough cleaning. By default it
starts with the SMART program.
In this programme, the robot cleans along
parallel lines.
In this programme, an area measuring roughly 2 m2is
cleaned rapidly in a circular direction, starting from a
centre of rotation chosen by the user.
Place ROBÒ manually in the centre of the spot to be
cleaned and activate the cleaning cycle by pressing
the button for 6 seconds.
Once cleaning terminates, ROBÒ will reposition itself
in the centre of the cleaned area.
A
Smart
A
Smart
SMART PROGRAMME
SPOT PROGRAMME
Spot
In this programme, ROBÒ cleans the perimeter
of the walls of the room where it is located.
FOLLOW THE WALL PROGRAMME
Follow the wall
Once cleaning terminates, ROBÒ returns to its
charging base, empties the dust container (if the
self-cleaning base is mounted) and charges the
battery automatically.
These programmes can also be activated via the
TUBÒ ROBÒ app and from the remote control
(optional).
Follow the wall
200 cm
OPERATION WITH THE PUSH-BUTTON PANEL
ROBÒ has three control modes:
ROBÒ push-button panel - TUBÒ ROBÒ app - Remote control (optional applicable accessory)
ROBÒ CONTROL MODES
The push-button panel allows for using the following
control modes:
FUNCTION BUTTONS ON ROBÒ
SWITCH-ON
ROBÒ switches on (check the battery charge
as explained on page 7)
press the button for 6 seconds
CLEANING CYCLE START
the SMART cleaning programme activates
(starts with the self-cleaning charging base)
press the button briey
PAUSE / RESTART
puts the cleaning programme in pause/restart
mode
press the button briey
RETURN TO CHARGING BASE
the robot returns to the charging base wherever
it is located
press the button briey
DUST CONTAINER AUTOMATIC CLEANING
(only with self-cleaning charging base)
with ROBÒ mounted on the self-cleaning
base, press the button twice rapidly.
The central vacuum unit activates and the
ROBÒ dust container empties
SPOT CLEANING PROGRAMME press the button for 3 seconds
REPEAT CLEANING CYCLE press the button twice
SELF-CLEANING FUNCTION DISABLING /
ENABLING
the automatic self-cleaning function is disabled
/ enabled again
simultaneously press and hold for 3
seconds the button and the front
collision guard
SWITCH-OFF
ROBÒ switches off with any set cleaning
programme
press the button for 6 seconds

ROBÒ TR800 Instruction Manual
ENEN
9
FUNCTION SET UP
On/Off On/Off
Start the cleaning cycle - SMART cleaning program SMART - intelligent mode
Automatic cleaning (with self-cleaning base) Enable - Disable
Dust container emptying Start - cleaning on request
Return to the charging station Returns to recharge
Edge cleaning program - FOLLOW THE WALL FOLLOW THE WALL
SPOT cleaning program SPOT
Adjust suction power: min / medium / max Suction power
Stand by Stand by
Search for ROBÒ Search for a device
Records the cleaning cycles history (cleaning time and m2)Record
Timer (daily or weekly cleaning schedule) Add schedule
Choice of water dosage level for floor washing MOP water quantity
RESETTING THE WI-FI CONFIGURATION
If the smartphone or tablet does not connect to ROBÒ due to the
configuration of the domestic router, or the password or for other
reasons, the Wi-Fi settings of ROBÒ can be reset as explained below:
1 - simultaneously press the buttons until the following
voice command is heard: Wi-Fi has been reset.
The luminous indicator will start flashing purple.
2 - repeat the Wi-Fi configuration procedure.
The TUBÒ ROBÒ app allows for using the following control
modes:
OPERATION WITH THE TUBÒ ROBÒ APP
To use the TUBÒ ROBÒ app with a smartphone/tablet, it is
necessary to access the Internet through a Wi-Fi network.
To access the area dedicated to the TUBÒ ROBÒ app for Android
and iOS platforms, scan the adjacent QR code.
REGISTER as requested by the procedure to complete the Wi-Fi
configuration and access with your LOGIN credentials.
OPERATION WITH REMOTE CONTROL (applicable optional accessory)
The remote control allows for using the following functions:
The full instructions for the remote control are inserted in the manual supplied with the product.
start with SMART
cleaning programme and
pause mode
voice message silencing
FOLLOW THE WALL
cleaning programme
suction power
ROBÒ manual guide
ROBÒ volume ROBÒ volume
adjustment of the water
level on oor mop
SPOT cleaning programme
start
pauses and restarts ROBÒ
search for ROBÒ
(ROBÒ emits a buzzer)
return to charging dock
to access the area dedicated to
the TUBÒ ROBÒ app for Android
and iOS platforms
The luminous indicator will
start flashing purple

ROBÒ TR800 Instruction Manual
ENEN
10
CLEANING MODES
DUST REMOVAL (STANDARD)
FLOOR WASHING
ROBÒ has two cleaning modes: DUST REMOVAL (STANDARD) - FLOOR WASHING
The modes are enabled automatically on the basis of the type of container/tank inserted on ROBÒ.
ROBÒ cleans oor surfaces using the edge-sweeping
side brushes and the main brush.
The dust collected is conveyed to the dust container
which is then emptied automatically on the self-
cleaning base, or manually by the end user.
ROBÒ will not start unless the dust container is
mounted on it.
With the water tank inserted, ROBÒ collects dust
with the brushes and conveys it to the suction
channel without activating the suction turbine.
• when using the FLOOR WASHING mode, it is
necessary to move the rugs along the cleaning
route;
• the tank with dispenser must be lled completely
with water alone (at 30°C) as indicated;
• at the end of the washing cycle, empty the tank
of any residual water, wash the cloth used and
mount the dust container back on.
ROBÒ cleans oor surfaces using the water contained
in the tank (S) and the MOP micro-bre cloth (P)
which retains moisture depending on how much water
was dispensed by ROBÒ.
With the TUBÒ ROBÒ app and the remote control, it
is possible to choose the level of water dispensed to
the MOP.
S
P
WARNING
PLEASE NOTE
PLEASE NOTE
If ROBÒ is located far from the charging dock,
it may lose the communication and continue
cleaning the same zone without being able
to return to the base, causing the battery to
run out.
Multiple magnetic barriers laid in series can
be used to delimit special areas to be excluded
from ROBÒ’s path.
MAGNETIC BARRIER
ACCESSORY SUPPLIED (1 barrier supplied)
EXAMPLES OF USE
It is used to exclude rooms or areas of the home
from the cleaning route covered by ROBÒ.
The sensor integrated on ROBÒ detects the
magnetic barrier and stops the robot from
crossing it.
The supplied barrier is 1 m long.
MAGNETIC BARRIER
WITH MULTIPLE MAGNETIC BARRIERS
NEAR BALCONIES
ROBÒ BASE

ROBÒ TR800 Instruction Manual
ENEN
11
To guarantee optimal performances from ROBÒ, complete the single routine maintenance operations listed
in this chapter.
The maintenance intervals listed in the table are subject to change in relation to the type of domestic
environment, the presence of pet animals and how frequently the robot is used.
ROUTINE MAINTENANCE
INDICATIVE ROUTINE MAINTENANCE SCHEDULE
dust container empty the dust container
with self-cleaning base without self-cleaning
base
empties automatically
when the robot returns to
the self-cleaning base
after every use
self-cleaning base clean thoroughly by removing dirt
residues every 10 cleaning cycles --
primary lter
HEPA lter
sponge lter
clean each lter thoroughly by
removing dirt residues, lters
should not be washed
weekly visual inspection
and clean when necessary
weekly visual inspection
and clean when necessary
side brushes
left (L) - right (R)
clean thoroughly by removing hair,
threads and residues using the
comb supplied
weekly visual inspection
and clean when necessary
weekly visual inspection
and clean when necessary
main brush
clean thoroughly by removing hair,
threads and residues using the
comb supplied
weekly visual inspection
and clean when necessary
weekly visual inspection
and clean when necessary
charging dock
clean the sensors on the front of
the charging dock using a damp
cloth
every 30 cleaning cycles every 30 cleaning cycles
clean the contacts of the charging
dock using a damp cloth every 20 cleaning cycles every 20 cleaning cycles
sensors clean all sensors on ROBÒ using a
damp cloth every 20 cleaning cycles every 20 cleaning cycles
casters clean thoroughly by removing hair,
threads and dirt residues every 10 cleaning cycles every 10 cleaning cycles
tank with water
dispenser ll with water only empty after every use
MOP oor cloth wash under running water after every washing cycle
People who are sensitive to contact with dust should always wear personal protective
equipment (suitable face mask and gloves) before cleaning the lters, brushes and dust
container.
CLEANING THE DUST CONTAINER - (SELF-CLEANING FUNCTION)
1 - Press the opening/closing lever (A) to
remove the dust container from ROBÒ.
PERIODIC INSPECTION OF THE DUST CONTAINER
dust sucked up by the central vacuum unit
self-cleaning base
automatic suction
We recommend periodically checking the dust container manually and clearing it thoroughly from any
materials not sucked up by the central vacuum unit.
WITH AUTOMATIC CHARGING BASE
3 - Press the lever (A) again and insert the
container until you hear a CLICK.
2 - Open the dust container, empty it completely
and clean it with a cloth.
The dust container is cleaned automatically when ROBÒ returns to the self-cleaning charging base.
A

ROBÒ TR800 Instruction Manual
ENEN
12
CLEANING / REPLACING THE FILTERS
HEPA FILTER AND SPONGE FILTER
1 - Remove the dust container and open the ap
(S) of the lter compartment.
2 - Extract the HEPA lter (H) and the sponge
lter (F).
3 - Clean each lter thoroughly by removing dirt
residues.
PRIMARY FILTER
1 - Open the dust container, empty it and clean
it thoroughly.
2 - Extract the primary lter (G) by pulling the
two rings on the side (W).
3 - Clean the lter thoroughly by removing dirt
residues.
F
S
H
G
W
Wear personal protective garments
before emptying the dust container or
cleaning the lters and brushes.
1 - Open the cover (Q) using the two levers (L).
2 - Extract the main brush (R) from its housing.
3 - Thoroughly clean the bristles of the brush
by removing hair, threads and residues with the
comb (C) supplied.
4 - Put the brush back into its housing and close
the cover.
1 - Extract the edge-sweeping brushes by
simultaneously pulling the side bristles with your
hands.
2 - Thoroughly clean the bristles by removing
hair, threads and residues with the comb (C)
supplied.
CLEANING / REPLACING THE BRUSHES
We recommend using the comb (C) supplied with ROBÒ.
3 - Put the brushes back in place by applying
pressure and observing the L (Left) and R
(Right) positions indicated on the bristle supports.
Wear personal protective garments
before emptying the dust container or
cleaning the lters and brushes.
Q
R
LEFT
RIGHT
L
WARNING
Check the integrity of the brushes and
replace them it they are broken.
C
C
CLEANING THE EDGE-SWEEPING SIDE BRUSHES
CLEANING THE MAIN BRUSH
Visit the tutorial area dedicated to ROBÒ on www.aertecnica.com Visit the tutorial area dedicated to ROBÒ on
www.aertecnica.com
WARNING
WARNING
Filters should not be washed
Filters should not be washed

ROBÒ TR800 Instruction Manual
ENEN
13
CLEANING THE SENSORS
CLEANING THE WHEELS
Use a damp cloth to clean all the sensors and
indicated charging contacts on ROBÒ and on the
charging dock.
Do not use solvents or chemical products.
Thoroughly clean the wheels by removing
hair, threads and residues using the comb
supplied.
Use a screwdriver to extract the front
wheel and clean the residues properly, as
shown in the picture.
Wear personal protective garments
before emptying the dust container or
cleaning the lters and brushes.
WARNING
Check the integrity of the brushes and
replace them it they are broken.
TANK WITH WATER DISPENSER
INSERTING THE MICRO-FIBRE CLOTH (MOP)
P
B
D
Before using the FLOOR WASHING mode, the
tank with the water dispenser must be lled
with water and then emptied at the end of the
washing cycle.
TANK FILLING
1 - Extract the dust container (A) to insert the
tank with the water dispenser (B).
2 - Open the cap (T) located on the top side of
the tank.
3 - Pour water into the tank using a suitable
container (W) and close the cap.
4 - Apply the oor mop provided (P) on the
bottom side of the tank (B), making sure that the
strips adhere properly to the Velcro fasteners (D).
6 - Insert the tank again all the way down until
you hear a CLICK.
ROBÒ will now be ready to wash the oors.
T
A
B
The tank with dispenser must be lled with
water alone (at 30°C).
Once the washing cycle terminates, empty the
tank of any residual water and wash the micro-
bre cloth.
WARNING
WARNING
With the TUBÒ ROBÒ app it is possible to choose
the level of water dispensed to the MOP.
PLEASE NOTE
Visit the tutorial area dedicated to ROBÒ on
www.aertecnica.com

ROBÒ TR800 Instruction Manual
ENEN
14
PROBLEM CAUSE ACTION
ROBÒ does not clean
Main brush clogged Check for any obstructions and clean the
main brush
Main brush worn out Replace the brush
Edge-sweeping side brushes
worn out Replace the brushes
Filters very dirty or damaged Clean the lters or replace them
ROBÒ does not wash
the oors
Insufcient water Check the water in the tank
Micro-bre cloth worn out; with
a worn cloth, water will not be
dispensed evenly resulting in
streaks and dripping
Replace the micro-bre cloth
Limescale residues inside the
oor mop tank
Replace the oor mop tank or remove the
limescale
Other problem Contact Aertecnica (for Italy only), or the
authorised foreign retailer
ROBÒ blocks during
cleaning
Edge-sweeping side brushes
blocked
Check whether any laments or objects
are blocking their rotation
Main brush blocked Check whether any laments or objects
are blocking its rotation
The anti-fall sensor is dirty Clear the sensor from any dust or debris
The side sensor is dirty Clear the sensor from any dust or debris
The front sensor is dirty Clear the sensor from any dust or debris
The front collision guard is
jammed
Strike the collision guard repeatedly to
remove any debris
Side wheels blocked
Clear the side wheels from any dust or
debris Push the wheels in and out and
check that they turn freely
PROBLEM CAUSE ACTION
ROBÒ does not return
to its base
The charging dock is not powered Check the power supply connection
The communication sensor of the
charging dock is dirty Clear the sensor from any dust or debris
ROBÒ communication sensor dirty Clear the sensor from any dust or debris
Other problem Contact Aertecnica (for Italy only), or the
authorised foreign retailer
With ROBÒ on the
self-cleaning base for
emptying the dust
container, the central
vacuum unit does not
start
Connection problem between the
charging dock and self-cleaning base
Verify whether the connector for the central
vacuum unit activation consent is properly
connected on the self-cleaning base
Connection problem between the
vacuum socket and self-cleaning base
Check that the activation tting is properly
inserted on the vacuum socket
Connection problem regarding the
central vacuum unit activation
consent
If there is a wireless system
Verify whether the transmitter is correctly
inserted on the self-cleaning base: at the start
and end of the dust container emptying cycle,
the transmitter’s LED ashes red
If there is a wireless system
Check the pairing conguration between the
transmitter and receiver
Other problem Contact Aertecnica (for Italy only), or the
authorised foreign retailer
During the automatic
emptying of the dust
container, the valve on
the base fails to open
Connection problem concerning
the activation consent between the
charging dock and the base
Check that the charging dock and base are
properly connected to one another
Valve obstructed Check for any debris on the valve and eliminate it
Other problem Contact Aertecnica (for Italy only), or the
authorised foreign retailer
When ROBÒ returns
to the self-cleaning
base, it does not
automatically activate
emptying of the dust
container
The automatic cleaning function of
the dust container is disabled
Enable the container’s automatic cleaning
function (see instructions on page 6)
The communication sensor of the
charging dock is dirty Clear the sensor from any dust or debris
Other problem Contact Aertecnica (for Italy only), or the
authorised foreign retailer
TROUBLESHOOTING
The following table lists a series of inconveniences that may occur when using ROBÒ. If the user cannot solve problem, contact Aertecnica (in Italy only) or the authorised foreign retailer.

ROBÒ TR800 Instruction Manual
ENEN
15
The regulations governing the disposal and demolition of ROBÒ, its components and any polluting materials
and substances change in relation to the country of nal use.
We recommend contacting the authorised agencies and bodies and observing the applicable regulations.
ROBÒ DISPOSAL
WEEE COLLECTION CENTRE
UNSORTED WASTE
UNSORTED WASTE
UNSORTED WASTE
UNSORTED WASTE
WEEE COLLECTION CENTRE
UNSORTED WASTE
UNSORTED WASTE
UNSORTED WASTE
WEEE COLLECTION CENTRE
RECYCLED
(PLASTIC POLYSTYRENE)
RECYCLED
(PLASTIC BAGS)
WEEE COLLECTION CENTRE
WEEE COLLECTION CENTRE
WEEE COLLECTION CENTRE
RECYCLED
(PLASTIC)
WEEE COLLECTION CENTRE
RECYCLED
(PLASTIC)
WEEE COLLECTION CENTRE
RECYCLED
(PLASTIC)
RECYCLED
(PLASTIC)
RECYCLED
(PAPER)

The manufacturer, AERTECNICA S.p.A., with registered office in Via Cerchia di Sant'Egidio 760,
47521 Cesena (FC) - ITALY
WITH REFERENCE TO:
Robot vacuum cleaner and floor mop with charging base for central vacuum unit
SERIES: ROBÒ
MODELS: TR800 / KTR800A
HEREBY DECLARES THAT
the models indicated in the state in which they were placed on the market, with the exception of
added components and/or operations carried out subsequently by the end user
CONFORM
To Directive 2014/30/EU (Electromagnetic Compatibility Directive) and subsequent amendments and
additions.
To Directive 2014/35/EU (Low-Voltage Directive) and subsequent amendments and additions.
To Directive 2014/53/EU (Direttiva RED) and subsequent amendments and additions
To Directive 2011/65/EU (Direttiva RoHS) and subsequent amendments and additions
To Directive 2002/96/EC (Direttiva WEE) and subsequent amendments and additions
To Directive 1907/2006/EC (Direttiva REACH) and subsequent amendments and additions
APPLIED HARMONISED STANDARDS:
IEC 60335-2-2:2009, AMD1:2012, AMD2:2016 in according with IEC 60335-1:2010, COR1:2010,
COR2:2010, AMD1:2013, COR1:2014
EN 60335-2-2:2010+A11:2012+A1:2013 in according with EN 60335-1:2012+A11:2014+A13:2017
ETSI EN 301 489-1 V2.1.1 (2017-02)
ETSI EN 301 489-17 V3.1.1 (2017-02)
EN 55014-1:2017
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
ETSI EN 300 328 V2.1.1 (2016-11)
Cesena, 20 September 2019 The Declarant
Daniele Golinucci
The descriptions and illustrations may vary. Aertecnica S.p.A. reserves the right to make changes to the
product and to the relative technical documentation without prior notice.
Via Cerchia di S. Egidio, 760
47521 Cesena (FC) Italy
AERTECNICA S.p.A. Tel. [phone]
Fax [phone]
[email protected]
www.aertecnica.com
EC DECLARATION OF CONFORMITY
TECHNICAL ASSISTANCE
For any technical problem and to request spare parts, contact Aertecnica (for Italy only) or the authorised
foreign retailer.
We advise the user to always provide the following details related to ROBÒ:
MODEL: TR800
SERIAL NUMBER OF THE PRODUCT:
indicated on the nameplate afxed to the bottom side of ROBÒ.
DATE OF PURCHASE:
including detailed information on the issues encountered.
SERIAL NUMBER
8001549_rev. 0-19