02
EN
Important Safety Precautions
1. Please read all the instructions carefully before using this product.
2. BE SURE TO unplug the power cord when cleaning LCD. Never clean it with
liquid detergent or spraying detergent, but wipe it with wet soft cloth. If it is still
not clean, please use special detergent for LCD.
3. DO NOT use accessories not authorized by the manufacturer, other wise they
may incur danger.
4. When disconnecting the power cord of display or power adapter, always re-
member to hold the plug instead of puling the wire to unplug the power cord.
5. Keep the display away from water sources such as bath tub, washbasin, sink or
washing machine.DO NOT place the display on wet oor or near a swimming pool,
or press LCD surface with ngers or hard objects.
6. The grooves and openings on the back and bottom of the shell are for ven-
tilation purpose and also for guaranteeing the reliability of the elements and
preventing them from overheating; in order to prevent the vents from blocking;
DO NOT place the display on bed, sofa, carpet or other similar surfaces; DO NOT
place the display near to or on heat radiator or heater;
DO NOT put the display into embedded device, unless it is provided with ade-
quate ventilating equipment.
7. Only the type of power source indicated on the nameplate applies to this
display. If you have any questions on the type of power source you use, please
consult the dealer of the display or local administration of power supply.
8. For safety, the display or the power adapter is equipped with three-pin plug
power cord. The third pin of this plug is for grounding, and only applicable to
socket that is correctly grounded. In case that your socket is not available for the
plug, please contact electrician to replace the socket.
9. Since there is high voltage or other risks when the shell is opened or moved,
please
DO NOT repair the display by yourself, but request qualied maintenance sta to
carry out.
10. In one of the following cases, please unplug the display or the power adapter
and ask qualied maintenance sta for help:
A. The power cord or the plug is impaired or worn.
B. The display falls o or the shell is damaged.
C. The display is obviously abnormal.
11. Please place the display in a cool, dry and well ventilated place.
12. Store the display in temperature range of -10°C~60°C, beyond which the
display may be damaged permanently.
