Tunturi T70 User manual

T70 & T80
OWNER’S MANUAL 2 - 13
BETRIEBSANLEITUNG 14 - 27
MODE D’EMPLOI 28 - 41
HANDLEIDING 42 - 54
MANUALE D’USO 55 - 67
MANUAL DEL USUARIO 68 - 80
BRUKSANVISNING 81 - 92
KÄYTTÖOHJE 93 - 104
Serial number
Seriennummer
Numero de serie
Serienummer
Numero di serie
Nòmero de serie
Seriennummer
Sarjanumero
O W N E R ’ S M A N U A L
www.tunturi.com

2
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS 2
ASSEMBLY 2
T70 / T80 3
BASICS ON EXERCISING 4
HEART RATE 5
CONSOLE 6
POSITION SPEED CONTROL (PSC) 7
CHOOSING AN EXERCISE 7
MANUAL EXERCISE 8
HEART RATE CONTROLLED 8
EXERCISE PROFILES 9
PROFILES 10
MEMORY FUNCTION 11
MAINTENANCE 11
MALFUNCTIONS 12
MOVING AND STORAGE 12
TECHNICAL DATA 13
WELCOME TO THE WORLD
OF TUNTURI EXERCISING!
Your choice shows that you really want to invest in your
well being and condition; it also shows you really value
high quality and style. With Tunturi Fitness Equipment,
you’ve chosen a high quality, safe and motivating
product as your training partner. Whatever your goal in
training, we are certain this is the training equipment to
JHW\RXWKHUH<RX·OOÀQGLQIRUPDWLRQDERXWXVLQJ\RXU
H[HUFLVHHTXLSPHQWDQGZKDWPDNHVIRUHIÀFLHQWWUDLQLQJ
at Tunturi’s website at WWW.TUNTURI.COM.
IMPORTANT SAFETY
INSTRUCTIONS
This Owner’s Manual is an essential part of your training
equipment: reading all instructions in this manual before
you start using this appliance. The following precautions
must always be followed:
WARNING
1HYHUXVHH[WHQVLRQFRUGVEHWZHHQWKHWUHDGPLOO
and your wall outlet. The device’s maximum power
FRQVXPSWLRQLV$2XWOHWVZLWKÁXFWXDWLQJYROWDJH
of more than 10 % may result in erratic performance or
cause damage to treadmill electronics. Using electrical
SRZHURWKHUWKDQWKDWZKLFKKDVEHHQVSHFLÀHGLQWKLV
manual will ultimately void any warranty, implied or
otherwise.
WARNING
to reduce any risk to persons:
.HHSKDQGVFOHDURIDQ\PRYLQJSDUWV1HYHUSODFH
hands, feet or any other objects into any opening or
under the treadmill.
1HYHUOHDYHWKHWUHDGPLOOXQDWWHQGHGZKHQSOXJJHGLQ
Unplug from outlet when not in use, before putting on or
taking off parts. To disconnect, turn all controls to the off
position, then remove plug from outlet.
&ORVHVXSHUYLVLRQLVQHFHVVDU\ZKHQWKHWUHDGPLOOXVHG
2
ENGLISH by, on, or near children, invalids, or disabled persons.
8VHWKHWUHDGPLOORQO\IRULWVLQWHQGHGXVHDVGHVFULEHGLQ
this manual. Do not use attachments not recommended
by Tunturi.
%HIRUH\RXVWDUWXVLQJWKHWUHDGPLOOPDNHVXUHWKDW
it functions correctly in every way. Do not use a faulty
device.
.HHSWKHFRUGDZD\IURPKHDWHGVXUIDFHV
77PXVWQRWEHXVHGRXWGRRUV77WROHUDWHV
an environment measuring +10°C to +35°C. Air humidity
must never exceed 90 %.
'RQRWDWWHPSWDQ\VHUYLFLQJRUDGMXVWPHQWRWKHUWKDQ
those described in this manual. The given instructions must
be followed carefully.
1HYHURSHUDWHWKLVWUHDGPLOOLILWKDVDGDPDJHGFRUGRU
plug, if it has been dropped or damaged, or dropped into
water. Return the treadmill to a service center for repair.
1HYHURSHUDWHWKHDSSOLDQFHZLWKWKHDLURSHQLQJ
EORFNHG.HHSWKHDLURSHQLQJVIUHHRIOLQWKDLUDQGWKH
like.
'RQRWRSHUDWHZKHUHDHURVROVSUD\SURGXFWVDUH
being used or where oxygen is being administered.
7KHGHYLFHPXVWQRWEHXVHGE\SHUVRQVZHLJKLQJRYHU
150 kg (330 lbs).
,QIRUPDWLRQRQZDUUDQW\WHUPVFDQEHIRXQGLQWKH
warranty booklet included with the product.
IMPORTANT Treadmills need constant lubrication.
After not using the machine for a while, the deck could
dry out and needs to be lubricated. Make sure you check
after long periods if the belt needs lubrication. Check the
lubrication section on page 8.
SAVE THESE INSTRUCTIONS!
ASSEMBLY
As for the assembly of the device, we recommend two
grown-up persons. Do not take the treadmill out of the
ER[XVHWKHSDFNLQJPDWHULDOWRFRYHUWKHÁRRURQWKH
assembly site.
Before assembling the device, insure all parts are present:
PACKAGE 1/2
1. Running base
2. Power cord
3. Assembly kit (contents are marked with an * in the
spare part list): keep the assembly tools, as you may need
them e.g. for adjusting the equipment.
PACKAGE 2/2
1. Handlebar
2. Console unit
3. Upright Tubes
7KHGLUHFWLRQVOHIWULJKWIURQWDQGEDFNDUHGHÀQHGDV
seen from the exercising position. In case of problems
contact your Tunturi dealer. The package includes
a silicate bag for absorbing moisture during storage
and transportation. Two people are needed for the
installation. Assemble the equipment as follows:

33
T70/T80
UPRIGHT TUBES
Connect the wire coming out of the left upright tube.
Fasten each upright tube to the lower frame with four
bolts. Be careful not to damage the wire coming out of
the upright tube.
NOTE! Do not remove the bolts, but slide the upright
tube over the bolts, and tighten by turning the bolts
&2817(5&/2&.:,6(
Place the plugs in the holes after tightening the bolts to
cover up. The plugs are self-adhesive (remove protection
before applying).
HANDLEBAR AND CONSOLE
Connect the wire coming out of the left handlebar with
the connector in the console and push the connected
wire inside the handlebar. Push the console unit onto
the handrail ends and tighten all the hex screws on the
upright tubes.
Apply the 4 bolts and washers to secure the Console on
the upright tubes. After lining up the console, fasten the
bolts.
Connect the Sensor wires from the left handlebar and
slide the wire into the tube coming from the console.
T70 & T80 - OWNER’S MANUAL ENGLISH

44
Put the right handlebar onto the console. Make sure the
foam is inside the plastics, and does not curl up. Line up
the holes on the bottom of the handrail, and loosely place
the bolts inside.
Attach the bottom of the handrail to the bracket, and
tighten the bolt. When this is attached, you can tighten
the bolts on the top of the handlebar.
Apply the brackets to the upright tube. First position all the
screws loosely, and make sure the bracket touches both
WKHERWWRPDQGWKHVLGHWRWKHIUDPH7KHQÀUVWVFUHZ
WLJKWWKHEROWVRQWKHERWWRPDQGÀQDOO\WKHEROWVRQWKH
upright tube.
5HPRYHWKHSURWHFWLYHÀOPIURPWKHGLVSOD\
SAFETY KEY
The treadmill cannot be used if the key is not properly
installed on the console; if the key is removed from its
place, the treadmill will immediately stop. Insert the safety
key into the key holder at the left side of the console.
Ensure that the clip of the safety key is properly attached
to your clothing; as the cord tightens, make sure the clip
does not detach itself from your clothing before the
safety key disconnects from the user interface.
POWER CORD AND GROUNDING INSTRUCTIONS
Plug the socket end of the power cord into the treadmill
at the left front corner. Before connecting the device to a
power source, make sure that local voltage matches that
indicated on the type plate. Turn on the power using the
switch next to the socket on the treadmill. This treadmill
must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electrical
current to reduce the risk of electrical shock. This product
is equipped with a cord having an equipment-grounded
conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local
codes and ordinances. Do not use extension cables when
connecting the equipment to the power source.
DANGER! Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
&KHFNZLWKDTXDOLÀHGHOHFWULFLDQRUVHUYLFHPDQLI\RX
are in doubt as to whether the product is properly
grounded. Do not modify the plug provided with the
SURGXFWLILWZLOOQRWÀWWKHRXWOHWKDYHDSURSHURXWOHW
LQVWDOOHGE\DTXDOLÀHGHOHFWULFLDQ
BASICS ON
EXERCISING
Before training on a motor-driven treadmill, you should
familiarise yourself with its functions and operation.
Working out with this equipment is excellent aerobic
exercise, the principle being that the exercise should
be suitably light but of long duration. Aerobic exercise is
based on improving the body’s maximum oxygen uptake,
ZKLFKLQWXUQLPSURYHVHQGXUDQFHDQGÀWQHVV
Aerobic exercise should above all be pleasant. You should
perspire, but your heart rate should stay at a comfortable
level. This will allow for a longer training session. Three 30 to
60 minute sessions a week is recommended, depending
RQ\RXUJRDOVÀWQHVVOHYHODQGVFKHGXOH
If you prefer a walking exercise, you can increase the
versatility and effort level of your workout by adjusting
the elevation. For a more versatile walking exercise, you
can also use light dumbbells to work your arm muscles.
Remember to pay attention to safety concerns, such as
maintaining your balance.
<RX·OOÀQGLQIRUPDWLRQDERXWXVLQJ\RXUH[HUFLVH
HTXLSPHQWDQGZKDWPDNHVIRUHIÀFLHQWWUDLQLQJDW
Tunturi’s website at www.tunturi.com.
ABOUT THE EXERCISE ENVIRONMENT
0DNHVXUHWKHH[HUFLVHHQYLURQPHQWKDVDGHTXDWH
ventilation. To avoid catching cold, do not exercise in a
draughty place.

55
3ODFHWKHWUHDGPLOORQDÀUPOHYHOVXUIDFH$OORZ
200x100 cm of clearance behind the treadmill and 100
cm on either side and in front of the treadmill. Make sure
that children and pets stay away from this area while the
treadmill is in use.
:HUHFRPPHQGWKDWWKHHTXLSPHQWLVSODFHGRQD
protective base.
ABOUT USING THE EQUIPMENT
$OZD\VXQSOXJWKHWUHDGPLOOIURPWKHHOHFWULFDORXWOHW
after each training session.
2QO\RQHSHUVRQPD\XVHWKHHTXLSPHQWDWDWLPH
.HHSKDQGVFOHDURIDQ\PRYLQJSDUWV1HYHUSODFH
hands, feet or any other objects under the treadmill
1HYHUOHDYHWKHWUHDGPLOOXQDWWHQGHGZKHQSOXJJHGLQ
:HDUDSSURSULDWHFORWKLQJDQGVKRHVZKHQH[HUFLVLQJ
Make sure your shoelaces are properly tied. To avoid injury
and unnecessary wear on your treadmill, be sure your
shoes are free of any debris such as gravel and small
pebbles.
BEGINNING AN EXERCISE SESSION
7RDYRLGPXVFXODUSDLQDQGVWUDLQEHJLQDQGHQGHDFK
workout by stretching.
6WDQGRQWKHODQGLQJUDLOVWRWKHOHIWDQGULJKWRIWKH
running belt. Do not stand on the running belt.
%HJLQHDFKZRUNRXWDWDORZVSHHGDQGJUDGXDOO\
increase your speed and/or treadmill elevation to a
comfortable level according to your condition.
$OZD\VKROGWKHKDQGUDLOIRUVXSSRUWZKHQJHWWLQJRQRU
off the treadmill and when changing the speed during
exercise. Do not jump off the running belt while it is
moving!
7RDYRLGQXPEQHVVDQGSDLQLQWKHQHFNVKRXOGHUDQG
back area, maintain an upright posture. Try to run in the
middle of the track, within comfortable reach of the
console.
,I\RXHQFRXQWHUDQ\RSHUDWLRQDOIDXOWVGXULQJH[HUFLVH
grip the handlebar for support and stand on the landing
rails to the left and right of the running belt. Turn the power
switch off and see the instructions under Malfunctions.
,I\RXH[SHULHQFHQDXVHDGL]]LQHVVRURWKHUDEQRUPDO
symptoms while exercising, stop your workout at once
and consult a physician.
FINISHING AN EXERCISE SESSION
)LQLVKHDFKZRUNRXWE\JUDGXDOO\UHGXFLQJWKHVSHHG
Don’t forget to stretch at the end of the workout.
1HYHUOHDYHWKHVDIHW\NH\LQWKHWUHDGPLOO
8VHWKHPDLQSRZHUVZLWFKWRWXUQWKHXQLWRII
8QSOXJWKHHOHFWULFDOFRUGIURPWKHZDOORXWOHWDQGIURP
the treadmill.
,IQHFHVVDU\FOHDQWKHWUHDGPLOOIURPVZHDWZLWKDGDPS
cloth. Do not use solvents.
6WRUHWKHHOHFWULFDOFRUGZKHUHLWLVFOHDUIURPDOO
pathways and out of childrens’ reach.
HEART RATE
No matter what your goal, you’ll get the best results by
training at the right level of effort, and the best measure
is your own heart rate. The most reliable heart rate
measurement is achieved with a telemetric device, in
which the electrodes of the transmitter fastened to the
chest transmit the pulses from the heart to the console
E\PHDQVRIDQHOHFWURPDJQHWLFÀHOG
NOTE!,I\RXDUHÀWWHGZLWKDSDFHPDNHUSOHDVH
consult a physician before using a wireless heart rate
monitor. If you want to measure your heart rate this way
during your workout, moisten the grooved electrodes on
the transmitter belt with saliva or water. Fasten the
WUDQVPLWWHUMXVWEHORZWKHFKHVWZLWKWKHHODVWLFEHOWÀUPO\
enough so that the electrodes remain in contact with the
skin while exercising, but not so tight that normal breathing
is prevented. If you wear the transmitter and belt over a
light shirt, moisten the shirt slightly at the points where the
electrodes touch the shirt. The transmitter automatically
transmits the heart rate reading to the console up to a
distance of about 1 m.
If the electrode surfaces are not moist, the heart-rate
reading will not appear on the display. If the electrodes
are dry, they must be moistened again. Allow the
electrodes warm up properly to ensure accurate heart
rate measurement. If there are several telemetric heart
rate measurement devices next to each other, the
distance between them should be at least 2 m.
Similarly, if there is only one receiver and several
transmitters in use, only one person with a transmitter
should be within transmission range. The transmitter is
switched to an active state only when it is being used for
measurement. Sweat and other moisture can, however,
keep the transmitter in an active state and waste battery
energy. Therefore it is important to dry the electrodes
carefully after use.
When selecting training attire, please note that some
ÀEHUVXVHGLQFORWKHVHJSRO\HVWHUSRO\DPLGHFUHDWH
static electricity, which may prevent reliable heart rate
measurement.
Please note that a mobile phone, television and other
HOHFWULFDODSSOLDQFHVIRUPDQHOHFWURPDJQHWLFÀHOG
around them, which will cause problems in heart rate
measurement.
)LUVWÀQG\RXUPD[LPXPKHDUWUDWHLHZKHUHWKHUDWH
doesn’t increase with added effort. If you don’t know
your maximum heart rate, please use the following
formula as a guide:
220 –AGE
These are average values and the maximum varies from
person to person. The maximum heart-rate diminishes
on average by one point per year. If you belong to a risk
group, ask a doctor to measure your maximum heart
rate for you.
:HKDYHGHÀQHGWKUHHGLIIHUHQWKHDUWUDWH]RQHVWRKHOS
you with targeted training.
BEGINNER: 50-60 % of maximum heart-rate Also suitable
for weight-watchers, convalescents and those who
haven’t exercised for a long time. Three sessions a week
of at least a half-hour each is recommended. Regular
exercise considerably improves beginners’ respiratory and
circulatory performance and you will quickly feel your
improvement.
TRAINER: 60-70 % of maximum heart-rate Perfect for
LPSURYLQJDQGPDLQWDLQLQJÀWQHVV(YHQUHDVRQDEOH
effort develops the heart and lungs effectively, training
for a minimum of 30 minutes at least three times a week.
T70 & T80 - OWNER’S MANUAL ENGLISH

66
To improve your condition still further, increase either
frequency or effort, but not both at the same time!
ACTIVE TRAINER: 70-80 % of maximum heart-rate Exercise
DWWKLVOHYHOVXLWVRQO\WKHÀWWHVWDQGSUHVXSSRVHVORQJ
endurance workouts.
CONSOLE
FUNCTION KEYS
START
Starts the selected training and activates the running belt.
SPEED CONTROL KEYS (Rabbit / Turtle)
Rabbit key increases the belt speed in 0,1 km/h / mph
increments, the turtle key decreases it in 0,1 km/h / mph
increments. Pressing these keys longer makes the speed
change faster. Track speed ranges from 0,5-22 km/h / 0,3-
13,7 mph.
ELEVATION CONTROL KEYS
Click the elevation up key to increase elevation in 0,5 %
increments, and the elevation down key to decrease it
in 0,5 % increments. Pressing these keys longer makes the
speed change faster. Track elevation ranges from 0 %
KRUL]RQWDOWR
START / STOP
Press STOP once and the treadmill stops and moves into its
waiting state for 5 minutes. You can restart the interrupted
exercise by pressing the START key within 5 minutes. At
the Pause screen, press ENTER JOGWHEEL to end your
H[HUFLVH.HHSWKH6723NH\SUHVVHGGRZQIRUVHFRQGV
to reset the console. The console then switches to its initial
state.
SELECT
Before you press the START key, use the jogwheel to
selects the training modes. During training, press ENTER
-2*:+((/WRVHOHFWWKHSURÀOHGLVSOD\V
ENTER JOGWHEEL
&RQÀUP\RXUVHOHFWLRQVWUDLQLQJPRGHRUSURJUDPXVHU
set-ups)
MEMORY
You can use the MEM key to save your completed
H[HUFLVHLQWKHFRQVROH·VPHPRU\7RVDYH\RXUSURÀOH\RX
need to choose a user code and you need to exercise for
10 minutes or more. A total of 5 workouts can be
saved under each user code.
PSC
Position Speed Control (PSC) allows you to adjust the
track speed without touching the console by changing
your position on the track during exercise. The PSC
function requires the use of a heart rate belt. PSC
can be used in manual exercises, HRC exercises with
HOHYDWLRQDGMXVWPHQWWKH5ROOLQJ+LOOVSURÀOHDVZHOODV
ERWKÀWQHVVWHVWV
SET
Press the SET key to choose a user code, enter user
details, select display values, and to display the total
training time in hours and the total training distance in
kilometers or miles based on the unit choice of the metric
or Imperial.
DISPLAYS
HEART RATE
50-220 bpm. The heart rate light always blinks when the
console is receiving a heart rate signal.
KCAL (estimated energy consumption)
0-9999 kcal, 1 kcal increment
ELEVATION
0-12 %, 0,5 % increment.
TIME
Exercise duration at 1 second intervals 00:00-99:59, and at
1 minute intervals thereafter h1:40-h9:59
DISTANCE
0.00-99.99 km, 0,01 km increment
SPEED
Running deck speed 0,5-22 km/h / 0,3-13,7 mph, 0,1 km/
mph increment. A signal light indicates the selected
measurement unit (km/h, mph, pace = minutes/ kilometre
or minutes/ mile).
GRAPHIC / TEXT DISPLAY
7IHDWXUHVDFRPELQHGWH[WDQGSURÀOHGLVSOD\WKDW
provides instructions in English when you switch to an
exercise and during the exercise itself. T80 is equipped
with a separate graphic display for detailed information
RQ\RXUZRUNRXWSURÀOHZKLOHWKHWH[WÀHOGSURYLGHV
instructions both when you switch to an exercise and
during the exercise itself.
ENTERING USER DETAILS
We recommend that you choose a user code and save
your personal details: these details are needed e.g. for a
more accurate estimation of your energy consumption.
At the same time, you can set the units to be displayed
and check the total training values. Choosing a user code
will also allow you to save your exercise data.
1. Press SET. Use the jogwheel to select a user code (1- 4).
3UHVV-2*:+((/WRFRQÀUP\RXUVHOHFWLRQ
NOTE! The NO USER option displays device settings,
showing e.g. the total training time and distance.
2. Set the measurement units (Metric = metric system,
Imperial = avoirdupois). Use the jogwheel to change the
VHWWLQJDQGSUHVV-2*:+((/WRFRQÀUP\RXUVHOHFWLRQ
You will then move to the next setting.
3. Set the user weight. Use the jogwheel to change the
VHWWLQJDQGSUHVV-2*:+((/WRFRQÀUP\RXUVHOHFWLRQ
This information is needed for estimating energy
consumption. You will then move to the next setting.
4. Set the user height. Use the jogwheel to change the
VHWWLQJDQGSUHVV-2*:+((/WRFRQÀUP\RXUVHOHFWLRQ
This information is needed for estimating energy
consumption on a 2-kilometre walking test. You will then
move to the next setting.
5. Set gender (male, female). Use the jogwheel to
FKDQJHWKHVHWWLQJDQGSUHVV-2*:+((/WRFRQÀUP\RXU
selection. This information is needed for estimating energy
consumption. You will then move to the next setting.
6. Set the age of the user. Use the jogwheel to change
WKHVHWWLQJDQGSUHVV-2*:+((/WRFRQÀUP\RXU
selection. This information is needed for estimating energy
consumption. You will then move to the next setting.
7. Set the audio signal (ON = signals on, OFF = signals
off ). Use the jogwheel to change the setting, and press

77
-2*:+((/WRFRQÀUP\RXUVHOHFWLRQ<RXZLOOWKHQPRYH
to the next setting.
NOTE!,QSURÀOHZRUNRXWVWKHFRQVROHJLYHVDQDXGLR
VLJQDOLQDGYDQFHRIDQ\FKDQJHVLQSURÀOH
8. Set the units to be displayed (km/h, min/km, mph, min/
mile). Use the jogwheel to change the setting, and press
-2*:+((/WRFRQÀUP\RXUVHOHFWLRQ<RXZLOOWKHQPRYH
to the next setting.
NOTE! You can set the units during exercise: press SET
once and use the jogwheel to change the setting, and
SUHVV-2*:+((/WRFRQÀUP\RXUVHOHFWLRQ
9. Set the maximum speed for PSC and HRC workouts with
the jogwheel: since PSC and HRC adjust the speed level
according to your heart rate, a maximum speed limit is
needed to keep the speed at a suitable level. The default
is 12 km/h. Use the jogwheel to change the setting, and
SUHVV-2*:+((/WRFRQÀUP\RXUVHOHFWLRQ<RXZLOOWKHQ
move to the next setting.
7KH727$/7,0(GLVSOD\VKRZVDXVHUVSHFLÀFWRWDO
training time on the treadmill. Press JOGWHEEL to move to
the next display.
7KH727$/',67$1&(GLVSOD\VKRZVDXVHUVSHFLÀFWRWDO
training distance on the treadmill. Press JOGWHEEL or
START to exit user settings.
Once you have set the user details, you can start
exercising by selecting your own user code. The selected
user code will remain in the console’s memory until it is
replaced with a new one, the safety key is removed from
its place, or the power cord is unplugged.
POSITION SPEED
CONTROL (PSC)
Position Speed Control (PSC) allows you to adjust running
track speed by changing your position on the track. Move
to the front of the track and it accelerates, and as you
move back the track itself slows down. When you are
walking or running in the middle section of the track the
speed stays steady.
NOTE! You must wear the Tunturi heart rate belt
when you use PSC! A blinking square in the Heart Rate
display indicates that heart rate measurement is in
operation.
NOTE! Attach the holder of the safety key carefully to
your shirt whenever you are using PSC. Adjust the length
of the safety key wire so that it will be detached from the
console, if you move too far back.
NOTE! If you are exercising with PSC, there must not
be another heart rate transmitter near the treadmill
(minimum distance 2 m); the simultaneous signals of two
transmitters endanger user safety by interfering with
the PSC.
PSC SETTINGS
PSC settings should be done with the treadmill at a
complete stop.
6WDUWWKHXVHRI36&E\VHWWLQJWKHVSHHG]RQHOLPLWV
Press the PSC key.
2. Depending on the previous settings, either PSC ON or
PSC OFF will be displayed. Use the jogwheel to change
the setting to PSC ON and press JOGWHEEL.
3. PRESS JOGWHEEL TO CALIBRATE PSC OR START TO
EXIT will be displayed. Position yourself in the middle of
WKHWUDFN7KHDFFHOHUDWLRQ]RQHEHJLQVDSSUR[LPDWHO\
10 cm ahead of the measurement point, while the
GHFHOHUDWLRQ]RQHEHJLQVDSSUR[LPDWHO\FPEHKLQG
the measurement point. Press JOGWHEEL and the text
PLEASE WAIT 8 will be displayed. The console will now
measure your distance on the basis of the heart rate
signal. Measurement takes 8 seconds, and after that
CALIBRATION READY PRESS START is displayed.
4. If the console cannot receive the heart rate signal or
there are problems in measuring the distance, the console
will return to where the PSC entry was from. In case of such
DQHUURUWKHWH[W&+(&.75$160,77(5LVGLVSOD\HG<RX
should then make sure that you have properly followed
the instructions on the use of the heart rate belt.
,IWKHVSHHG]RQHOLPLWVDUHVXLWDEOHIRU\RXWKHQH[WWLPH
you start exercising you can start PSC just by selecting PSC
ON and pressing JOGWHEEL and START, and then select
the desired training mode. If you want to change the
VSHHG]RQHOLPLWVUHSHDWVWHSVDQGPRYHWRDPRUH
suitable position on the track before the measurement.
TRAINING WITH PSC
6HOHFW0DQXDOH[HUFLVH5ROOLQJ+LOOVSURÀOHDFRQGLWLRQ
test or the standard heart rate exercise with automatic
elevation adjustment. In these exercises you can adjust
the track speed with PSC. The PSC signal light indicates
that the feature is in operation. T70 / T80 is equipped with
WKUHH36&VLJQDOOLJKWVWKDWVKRZLQZKLFKVSHHG]RQH\RX
are currently running (+) = speed increases, (o) = constant
speed, (-) = speed decreases).
2. Start the selected exercise by pressing the START key,
and adjust track speed by moving forward or back on the
track. Please note that the speed adjustment keys (-/+)
are also in operation during a PSC exercise.
NOTE! If you have not tried the PSC feature before,
we recommend you start at slow speed.
CHOOSING AN
EXERCISE
Use JOGWHEEL until the signal light indicates the desired
exercise. You can choose between:
1. Manual exercise in which you adjust both speed and
elevation yourself during the exercise.
2. Heart rate controlled HRC exercise in which the
treadmill adjusts the speed / elevation automatically, so
that your heart rate stays at the level set. You always need
to wear a heart rate belt while doing HRC exercises.
3. Fitness tests feature with two test options: a 2- kilometre
walking test and a 12-minute Cooper run test.
3UHVHWH[HUFLVHSURÀOHLQZKLFKVSHHGHOHYDWLRQRUKHDUW
rate level vary according to the preset program.
T70 & T80 - OWNER’S MANUAL ENGLISH

88
MANUAL EXERCISE
QUICK START
1. Manual exercise is the treadmill default setting. You
can start the exercise directly by pressing the START
key. The belt starts moving at 1,5 km/h / 1,0 mph.
STARTING WITH THE USER DETAILS SETUP
2. If you want to use user details or save your workout, set
your user details or select your user code (1-4). Press START
WRFRQÀUP\RXUVHOHFWLRQ
3. Press JOGWHEEL until the signal light shows next to the
Manual text.
4. Press START. The belt starts moving at 1,5 km/h / 1,0 mph.
Use the -/+ keys or the PSC function to adjust the speed
and the elevation control keys to adjust the elevation.
7KHSURÀOHGLVSOD\FROOHFWVWKHH[HUFLVHGHWDLOVDWRQH
minute intervals. After 20 minutes, the display will shift to
the left to show the speed details from the last 20 minutes.
Pressing JOGWHEEL during the exercise will display speed,
HOHYDWLRQDQGKHDUWUDWHSURÀOHVIRUWKHH[HUFLVH
6. Press STOP and the treadmill stops and moves into
waiting state for 5 minutes. You can restart the interrupted
exercise by pressing the START key within 5 minutes.
You can use the waiting state to save your workout in
the console’s memory (see Memory Function). Press
JOGWHEEL to end exercising and display feedback on
your workout.The console then switches to its initial state.
HEART RATE
CONTROLLED
EXERCISE
Heart rate controlled exercises enable training at a
selected heart rate level. Heart rate controlled exercises
always require the use of a heart rate belt. If heart rate
measurement is not working correctly, the error message
&+(&.75$160,77(5ZLOOEHGLVSOD\HG<RXVKRXOGWKHQ
make sure that you have properly followed the instructions
on the use of the heart rate belt.
1. If you want to use user details or save your workout,
set your user details or select your user code (1-4). Press
67$57WRFRQÀUP\RXUVHOHFWLRQ
2. Use JOGWHEEL until the signal light shows the HRC text.
3UHVV-2*:+((/WRFRQÀUP\RXUVHOHFWLRQ
3. Select the HRC mode with the jogwheel:
a) Speed = heart rate control is based on changing belt
speed. If you wish, you can change the inclination angle
of the belt during training.
b) Elevation = heart rate control is based on changing
treadmill inclination. In this mode you have to adjust
the speed by yourself using either PSC or the Turtle and
Rabbit keys.
c) Combination = automatic equal adjustment of both
the inclination angle and the speed of the belt.
3UHVV-2*:+((/WRFRQÀUP\RXUVHOHFWLRQ
5. Set the desired heart rate (80-180) with the JOGWHEEL
6. Press START to start constant heart-rate exercise. You
can adjust the heart rate level with the jogwheel during
the exercise.
7KHSURÀOHGLVSOD\FROOHFWVWKHH[HUFLVHGHWDLOVDWRQH
minute intervals. After 20 minutes, the display will shift to
the left to show the speed details from the last 20 minutes.
Pressing JOGWHEEL during the exercise will display speed,
HOHYDWLRQDQGKHDUWUDWHSURÀOHVIRUWKHH[HUFLVH
8. Press STOP and the treadmill stops and moves into
waiting state for 5 minutes. You can restart the interrupted
exercise by pressing the START key within 5 minutes.
You can use the waiting state to save your workout in
the console’s memory (see Memory Function). Press
JOGWHEEL to end exercising and display feedback on
your workout. The console then switches to its initial state.
FITNESS TESTS
7KHWUHDGPLOOIHDWXUHVWZRGLIIHUHQWÀWQHVVWHVWV7KHIDVW
paced 2 km walking test requires a lower level of effort,
while the 12-minute Cooper run test is better suited to
WKRVHZKRDUHÀW<RXFDQXVH36&WRDGMXVWWKHVSHHG
during the tests.
1. Select your user code (1-4) with the jogwheel. Press
67$57WRFRQÀUP\RXUVHOHFWLRQ
2. Press JOGWHEEL until the signal light shows next to the
WH[W7(673UHVV-2*:+((/WRFRQÀUP\RXUVHOHFWLRQ
3. Press JOGWHEEL to choose between the 2 km walking
WHVWDQGWKH&RRSHUWHVW3UHVV-2*:+((/WRFRQÀUP\RXU
selection.
2 KM WALKING TEST
The walking test requires the use of a heart rate monitor.
7KHWHVWPHDVXUHV\RXUÀWQHVVOHYHORQWKHEDVLVRI\RXU
heart rate level during the exercise and the time taken
to complete the 2 km distance. The test is preceded by
a 3-minute warm-up period. We also recommend you
continue walking slowly after the test, so that your heart
rate returns smoothly to normal. On the basis of your
performance, the console will display an estimate of
your maximum oxygen uptake capacity.
BEGINNING THE WALKING TEST:
1. The display prompts for user height: enter your height
ZLWKWKHMRJZKHHO3UHVV-2*:+((/WRFRQÀUP\RXU
setting.
2. The display prompts for the user’s sex: JOGWHEEL your
VH[ZLWKWKHMRJZKHHO3UHVV-2*:+((/WRFRQÀUP\RXU
setting.
3. The display prompts for user weight: enter your weight
ZLWKWKHMRJZKHHO3UHVV-2*:+((/WRFRQÀUP\RXU
setting.
4. The display prompts for the user’s age: enter your
DJHZLWKWKHMRJZKHHO3UHVV-2*:+((/WRFRQÀUP\RXU
setting.
5. The display reads WARM UP to indicate you can begin
the 3-minute warm-up period. Begin the warmup period
by pressing START.
6. The running deck elevation is adjusted at 1 % to simulate
air resistance. Adjust speed using the speed control keys
or the PSC function. We recommend that you warm up by
walking at a slightly faster pace than normally.
7. During the warm-up period, time will count down
from three minutes. When the time displays 0:00, the
console gives an audio signal and the actual test will
begin (TEST STARTED!).
PERFORMING THE WALKING TEST:
1. The goal is to walk the 2 km distance as quickly as
possible. Adjust the speed yourself by using the speed
control keys or the PSC function. Do not run during the
test!
2. If the heart rate measurement is not working correctly,
WKHGLVSOD\ZLOOVKRZWKHDOHUW&+(&.75$160,77(5<RX
should then make sure that you have properly followed

999
the instructions on the use of the heart rate belt.
3. Once the 2 km distance is covered, the console gives
an audio signal. The test is automatically followed by a
5-minute cooldown period, after which the treadmill will
stop. The display gives the test result as your maximum
oxygen uptake capacity and shows an estimate of your
ÀWQHVVOHYHO&RPSDUH\RXUUHVXOWVWRWKHÀWQHVVOHYHO
categories for different age groups, shown in the table.
COOPER TEST
7KH&RRSHUWHVWLVXVHGWRFDOFXODWH\RXUÀWQHVVOHYHORQ
the basis of the distance you run in a period of 12 minutes:
WKHORQJHUWKHGLVWDQFH\RXFRYHUWKHEHWWHU\RXUÀWQHVV
level. The test is preceded by a 3-minute warm-up period.
We also recommend you continue walking slowly after the
test, so that your heart rate returns smoothly to normal. On
the basis of your performance, the console will display an
estimate of your maximum oxygen uptake capacity.
BEGINNING THE COOPER TEST:
1. The display reads COOPER TEST. Press JOGWHEEL to
FRQÀUP\RXUVHOHFWLRQ
2. The display prompts for the user’s sex: enter your sex
ZLWKWKHMRJZKHHO3UHVV-2*:+((/WRFRQÀUP\RXU
setting.
3. The display prompts for the user’s age: enter your
DJHZLWKWKHMRJZKHHO3UHVV-2*:+((/WRFRQÀUP\RXU
setting.
4. The display reads WARM UP to indicate you can begin
the 3-minute warm-up period. Begin the warmup period
by pressing START.
5. The running deck elevation is adjusted at 1 % to simulate
air resistance. Adjust speed using the speed control keys.
We recommend that you warm up by walking at a slightly
faster pace than normally.
6. During the warm-up period, time will count down from
three minutes. When the time displays 0:00, the console
gives an audio signal and the actual test will begin (TEST
STARTED!).
PERFORMING THE COOPER TEST:
1. The goal is to run as long a distance as possible
in a period of 12 minutes. Adjust the speed yourself
by using the speed control keys or the PSC function.
The display shows the time elapsed and your
estimated results throughout the test.
2. Once the 12 minutes are up, the console gives an
audio signal. The test is automatically followed by a 5-
minute cool-down period, after which the treadmill will
stop. The display gives the test result as your maximum
oxygen uptake capacity and shows an estimate of your
ÀWQHVVOHYHO&RPSDUH\RXUUHVXOWVWRWKHÀWQHVVOHYHO
categories for different age groups, shown in the table.
EXERCISE PROFILES
7XQWXULKDVGHYHORSHGGLIIHUHQWSUHVHWH[HUFLVHSURÀOHV
in order to ensure versatile, pleasant and goal-oriented
training. The console gives an audio signal in advance
RIFKDQJHVLQDSURÀOH7KHSURÀOHGLVSOD\VKRZVWKH
VKDSHRIWKHSURÀOHDQGWKHGHWDLOVRIWKHQH[WSURÀOH
bar. If you want to use user details or save your workout,
set your user details or select your user code (1-4).Press
67$57WRFRQÀUP\RXUXVHUFRGHVHOHFWLRQ
$&RPELQDWLRQSURÀOHVDUHH[HUFLVHSURÀOHVZLWK
different effort levels and preset speed and elevation.
You can programme the speed to a desired level and set
the duration of the exercise to be displayed either in
WLPHRUGLVWDQFH7KHVHSURÀOHVGRQRWUHTXLUHWKHXVHD
heart rate belt, but that provides interesting additional
information about your performance.
3UHVV-2*:+((/XQWLOWKHVLJQDOOLJKWVKRZVWKHSURÀOH
\RXZDQW3UHVV-2*:+((/WRFRQÀUP\RXUVHOHFWLRQ
3UHVV-2*:+((/WRVHWSURÀOHGLVWDQFHWLPH3UHVV
-2*:+((/WRPRYHWRSURÀOHGXUDWLRQWLPHGLVWDQFH
setting. The previous duration set is shown on the
display. Use the JOGWHEEL key to alternate between
different setting values. You can change the value using
the jogwheel (limit 10 minutes (10:00) – 3 hours (h3:00),
adjusting at 5 minute steps / 1 km - 60 km, adjusting at 1
km steps, or 0.5 miles - 37 miles, adjusting at 0.5 mile steps)
3UHVV-2*:+((/WRFRQÀUP\RXUVHOHFWLRQ
3. Press START. The exercise begins and the belt starts
PRYLQJ<RXFDQVFDOHWKHSURÀOHVSHHGOHYHOXSDQG
down at 1 % steps using the jogwheel. Pressing JOGWHEEL
during the exercise will display speed, Pressing JOGWHEEL
during the exercise will display speed, elevation and heart
UDWHSURÀOHVIRUWKHH[HUFLVH
4. Press STOP and the treadmill stops and moves into
waiting start for 5 minutes. You can restart the interrupted
exercise by pressing the START key within 5 minutes or
you can save your workout in the console’s memory (see
Memory Function). Press JOGWHEEL to end exercising
and display feedback on your workout. The console then
switches to its initial state.
5. The cool-down period will automatically start once
\RXKDYHFRPSOHWHGWKHSURÀOH$IWHUWKHFRROGRZQ
the treadmill will stop. You can save your workout in the
console’s memory (see Memory Function).
MEN / MAXIMAL OXYGEN UPTAKE (VO2MAX)
1 = VERY POOR - 7 = EXCELLENT
AGE 1 2 3 4 5 6 7
18-19 <33 33-38 39-44 45-51 52-57 58-63 >63
20-24 <32 32-37 38-43 44-50 51-56 57-62 >62
25-29 <31 31-35 36-42 43-48 49-53 54-59 >59
30-34 <29 29-34 35-40 41-45 46-51 52-56 >56
35-39 <28 28-32 33-38 39-43 44-48 49-54 >54
40-44 <26 26-31 32-35 36-41 42-46 47-51 >51
45-49 <25 25-29 30-34 35-39 40-43 44-48 >48
50-54 <24 24-27 28-32 33-36 37-41 42-46 >46
55-59 <22 22-26 27-30 31-34 35-39 40-43 >43
60-64 <21 21-24 25-28 29-32 33-36 37-40 >40
WOMEN / MAXIMAL OXYGEN UPTAKE (VO2MAX)
1 = VERY POOR - 7 = EXCELLENT
AGE 1 2 3 4 5 6 7
18-19 <28 28-32 33-37 38-42 43-47 48-52 >52
20-24 <27 27-31 32-36 37-41 42-46 47-51 >51
25-29 <26 26-30 31-35 36-40 41-44 45-49 >49
30-34 <25 25-29 30-33 34-37 38-42 43-46 >46
35-39 <24 24-27 28-31 32-35 36-40 41-44 >44
40-44 <22 22-25 26-29 30-33 34-37 38-41 >41
45-49 <21 21-23 24-27 28-31 32-35 36-38 >38
50-54 <19 19-22 23-25 26-29 30-32 33-36 >36
55-59 <18 18-20 21-23 24-27 28-30 31-33 >33
60-64 <16 16-18 19-21 22-24 25-27 28-30 >30
T70 & T80 - OWNER’S MANUAL ENGLISH

10
B. Rolling Hills is an interval exercise in which you can
determine track speed yourself and set the distance to be
run or the duration of the exercise. Rolling Hills allows you
to regulate your speed using the PSC function. Unless
\RXXVH36&WKLVSURÀOHGRHVQRWUHTXLUHWKHXVHRID
heart rate belt. However, a heart rate belt will provide
you with interesting additional information about your
performance.
3UHVV-2*:+((/XQWLOWKHVLJQDOOLJKWVKRZVWKHSURÀOH
3UHVV-2*:+((/WRFRQÀUP\RXUVHOHFWLRQ
3UHVV-2*:+((/WRPRYHWRSURÀOHGXUDWLRQWLPH
distance) setting. The previous duration set is shown on
the display. Use the JOGWHEEL key to alternate between
different setting values. You can change the value using
the jogwheel (limit 10 minutes (10:00) – 3 hours (h3:00),
adjusting at 5 minute steps / 1 km – 60 km, adjusting at 1
km steps).
3. Press START. The exercise begins and the belt starts
moving. Use the speed control keys or PSC to adjust the
speed. Pressing JOGWHEEL during the exercise will display
HOHYDWLRQDQGKHDUWUDWHSURÀOHVIRUWKHH[HUFLVH
<RXFDQVFDOHWKHSURJUDPHOHYDWLRQSURÀOHXSDQG
down using the jogwheel.
5. Press STOP and the treadmill stops and moves into
waiting start for 5 minutes. You can restart the interrupted
exercise by pressing the START key within 5 minutes or
you can save your workout in the console’s memory
(see Memory Function). Press the STOP key twice to end
exercising and display feedback on your workout. The
console then switches to its initial state.
6. The cool-down period will automatically start once
\RXKDYHFRPSOHWHGWKHSURÀOH$IWHUWKHFRROGRZQ
the treadmill will stop. You can save your workout in the
console’s memory (see Memory Function).
&+HDUWUDWHFRQWUROOHG+5&SURÀOHVDUHKHDUWUDWH
FRQWUROOHGH[HUFLVHSURÀOHVZLWKGLIIHUHQWHIIRUWOHYHOV
that allow you to set the duration of the exercise. The
KHDUWUDWHFRQWUROOHGSURÀOHVDOZD\VUHTXLUHWKHXVHRID
heart rate belt. If heart rate measurement is not working
FRUUHFWO\WKHHUURUPHVVDJH&+(&.75$160,77(5ZLOO
be displayed. You should then make sure that you have
properly followed the instructions on the use of the heart
rate belt.
1. Press JOGWHEEL until the signal light shows next to the
SURÀOH\RXZDQW3UHVV-2*:+((/WRFRQÀUP\RXU
selection.
2. Select the HRC mode with the jogwheel. Press
-2*:+((/WRFRQÀUP\RXUVHOHFWLRQ
3UHVV-2*:+((/WRPRYHWRSURÀOHGXUDWLRQWLPH
distance) setting. The previous duration set is shown on
the display. Use the JOGWHEEL key to alternate between
different setting values. You can change the value using
the jogwheel (limit 10 minutes (10:00) – 3 hours
(h3:00), adjusting at 5 minute steps / 1 km - 60 km,
adjusting at 1 km steps, or 0.5 miles - 37 miles, adjusting at
0.5 mile steps)
4. Press START. The exercise begins and the belt starts
moving.
<RXFDQVFDOHWKHSURÀOHKHDUWUDWHOHYHOXSDQGGRZQ
at 1% steps using the jogwheel.
6. Press STOP and the treadmill stops and moves
into waiting start for 5 minutes. You can restart the
interrupted exercise by pressing the START key within
5 minutes or you can save your workout in the console’s
memory (see Memory Function). Press the STOP key
twice to end exercising and display feedback on your
workout. The console then switches to its initial state.
7. The cool-down period will automatically start once
\RXKDYHFRPSOHWHGWKHSURÀOH$IWHUWKHFRROGRZQWKH
treadmill will stop. You can save your workout in the
console’s memory (see Memory Function).
PROFILES
SURÀOHÀJXUHVDUHDWWKHEDFNIROGRIWKHPDQXDO
PROFILE 1+LOO:DON7KLVSURÀOHLVEDVHGRQUHJXODU
changes in elevation, combined with a fairly steady,
EULVNZDONLQJSDFH7KHSURÀOHLVVXLWHGWREHJLQQHUV
and active walkers. The default values are preset to an
average speed of 5.2 km/h and a top speed of 5.8 km/h,
with an average elevation of 2.7%.
PROFILE 2 +LOO-RJ7KLVSURÀOHLVEDVHGRQLUUHJXODU
changes in elevation, combined with a fairly steady, light
MRJJLQJSDFH7KHSURÀOHLVVXLWHGWREHJLQQHUVDVZHOODV
WRWKRVHZKRZDQWWRPDLQWDLQWKHLUÀWQHVV7KHGHIDXOW
values are preset to an average speed of 6.9 km/h and
a top speed of 7.2 km/h, with an average elevation of
1.9%.
PROFILE 3+LOO5XQ7KLVSURÀOHLVEDVHGRQD
consistent, low elevation, combined with a brisk
UXQQLQJSDFHZLWKUHJXODUYDULDWLRQ7KHSURÀOHLVVXLWHG
to active runners. The default values are preset to an
average speed of 11.6 km/h and a top speed of 12.5
km/h, with an average elevation of 1.8%.
PROFILE 4 5ROOLQJ+LOOV$GLVWDQFHSURÀOHZKHUH\RX
can set the distance to be covered in kilometres. The
SURÀOHLVVSHFLÀFDOO\GHVLJQHGIRUUHJXODUWUDLQLQJEXW
DOVRDOORZVIRUYDULHGURXWLQHVLQÀWQHVVWUDLQLQJ7KH
maximum distance is 60 km, with the default value
SUHVHWWRNPDGMXVWLQJDWNPVWHSV7KHSURÀOH
features interval type elevation settings, with an average
elevation of 2.4%.
PROFILE 5 )DWEXUQHU$KHDUWUDWHSURÀOHZLWKD
low level of effort, based on a regular rise and fall in the
KHDUWUDWH7KHSURÀOHLVVXLWHGWRZHLJKWFRQWURO7KH
default values are preset to an average heart rate of 114
bpm and a maximum heart rate of 125 bpm.
PROFILE 6 ()DWEXUQHU$KHDUWUDWHSURÀOHZLWK
a medium level of effort, based on an interval type
ULVHDQGIDOOLQWKHKHDUWUDWH7KHSURÀOHLVVXLWHGWR
ÀWQHVVWUDLQLQJDQGZHLJKWFRQWURO7KHGHIDXOWYDOXHV
are preset to an average heart rate of 122 bpm and a
maximum heart rate of 136 bpm.
PROFILE 7 &DUGLR$KHDUWUDWHSURÀOHZLWKDPHGLXP
level of effort, based on a regular rise and fall in the
KHDUWUDWH7KHSURÀOHLVLGHDOIRUÀWQHVVWUDLQLQJ7KH
default values are preset to an average heart rate of 130
bpm and a maximum heart rate of 145 bpm.
PROFILE 8 )LW$KHDUWUDWHSURÀOHZLWKDKLJKOHYHORI
effort, based on a regular rise and fall in the heart rate.
7KHSURÀOHLVVXLWHGWRGHPDQGLQJÀWQHVVWUDLQLQJDQG
improvement. The default values are preset to an average
heart rate of 135 bpm and a maximum heart rate of 150
bpm.

1111
MEMORY FUNCTION
The Memory function requires the use of a user code:
the exercise is saved under the selected user code. You
can save 5 exercises under each user code.
SAVING YOUR OWN PROFILE:
<RXFDQVDYHSUHVHWSURÀOHVRQFHWKHH[HUFLVHLV
FRPSOHWHGRUDIWHUÀQLVKLQJWKHH[HUFLVHE\SUHVVLQJ
STOP once. If you want to save your Manual or HRC
ZRUNRXWVÀQLVKWKHH[HUFLVHE\SUHVVLQJ6723RQFH
Save your exercise by pressing MEM.
2. The display prompts for a memory slot (SAVE AS
OWN 1-5). Select the desired memory slot with the
MRJZKHHODQGSUHVV-2*:+((/WRFRQÀUP\RXUVHOHFWLRQ
your workout is now saved to the desired slot.
3. If there are no empty memory slots, replace a previous
SURÀOHZLWKDQHZRQH7KHGLVSOD\WKHQSURPSWV\RX
WRFRQÀUP5(3/$&(2:13UHVV-2*:+((/WR
FRQÀUP\RXUVHOHFWLRQ\RXUZRUNRXWLVQRZVDYHGWR
the desired slot.
6$9('$62:1LVGLVSOD\HGWRFRQÀUP\RXU
save. The console will automatically switch to its initial
state.
NOTE!7RVDYHDSURÀOH\RXQHHGWRH[HUFLVHIRU
minutes or more.
USING YOUR OWN PROFILE:
1. Select your user code.
2. Press MEM.
3. Use JOGWHEEL until the signal light indicates the desired
RZQSURÀOH0(025<3UHVV-2*:+((/WRFRQÀUP
\RXUVHOHFWLRQ6HOHFW5(581WRXVHWKHSURÀOHZLWKRXW
DGMXVWPHQWVRU5$&(WRXVHWKHSURÀOHDVDEDVLVIRUWKH
Race function) with the JOGWHEEL key.
3UHVV-2*:+((/WRFRQÀUP\RXUVHOHFWLRQ
3UHVV67$57WREHJLQWKHSURÀOH
7KH5(581IXQFWLRQDOORZV\RXWRVFDOH\RXURZQSURÀOH
and save the changes.
RACE FUNCTION
To race against a previously saved exercise, select RACE
LQWKH2ZQ3URÀOHPHQX
1. Press START. The exercise begins and the belt starts
moving.
$GMXVWWKHVSHHGDFFRUGLQJWR\RXUÀWQHVVOHYHOHLWKHU
manually or using the PSC function.
7KHFRQVROHGLVSOD\VKRZVLQIRUPDWLRQRQSURÀOH
progress and any changes ahead.
2QFHWKHSURÀOHKDVEHHQFRPSOHWHGWKHFRROGRZQ
period will automatically start. You can save your workout
in the console’s memory (see Memory Function).
MAINTENANCE
The equipment is safe to use only when periodically
maintained and inspected for faults and wear. Do not
attempt any servicing or adjustment other than those
described in this manual. Any other servicing must be
SHUIRUPHGE\DQDXWKRUL]HGVHUYLFHUHSUHVHQWDWLYH
&KHFNWKHWLJKWQHVVRIDOOÀ[LQJVFUHZVRQFHD\HDU
Do not overtighten. Defective components must be
immediately replaced: the equipment must not be
operated with any defective components.
CLEANING AND LUBRICATING THE TREADMILL
FAILURE TO LUBRICATE YOUR TREADMILL MAY
INVALIDATE THE PRODUCT’S WARRANTY!
Wipe the treadmill surfaces, especially the handlebars
and console from dust with a damp cloth or towel.
'RQRWXVHVROYHQWV8VHDVPDOOYDFXXPQR]]OHWR
carefully vacuum around all visible components (belt,
running deck, side rails etc.). Also keep the area near
the treadmill clean. While in use, the treadmill gathers
dust that may cause problems in the operation of the
equipment.
In average domestic use (a maximum of 60 minutes a
day), you should check the lubrication once a month
– however, lubricate the belt only if needed. In more
demanding use, the lubrication needs be checked at
shorter intervals. This is best done before you begin a
training session. Check the lubrication as follows:
1. Ensure the treadmill is powered off! Step on the
treadmill belt and stand steadily where you normally
run on the belt.
7DNHKROGRIWKHKRUL]RQWDOKDQGOHEDUDQGSXVKWKH
belt with your feet so that it slides back and forth. The
belt should move softly and evenly, without a sound.
3. If you notice jerky movement or if the belt will not
slide check for lubrication by sliding your hand under
the belt. Lubricate the running deck according to the
following instructions:
NOTE! Lubricate your treadmill only with T-Lube S
silicon lubricant. Contact your local Tunturi distributor
for further supplies of T-Lube or further information on
lubrication and maintenance.
IMPORTANT! Treadmills need constant lubrication.
After not using the machine for a while, the deck could
dry out and needs to be lubricated. Make sure you check
after long periods if the belt needs lubrication. To
lubricate open the small caps at the end of the treadmill
ZLWKDVPDOOFRLQ$QGVTXHH]HKDOIWKHERWWOHRI7OXEH
The lubrication system will make sure the belt is evenly
lubricated.
T70 & T80 - OWNER’S MANUAL ENGLISH

12
ALIGNING THE RUNNING BELT
Monitor belt tracking during exercise and make
adjustments as needed. The belt should run in the
center of the treadmill. Alignment is not usually needed,
provided
WKHWUHDGPLOOLVSODFHGRQDQHYHQVROLGDQG
KRUL]RQWDOVXUIDFHDQGWKHEHOWLVFRUUHFWO\WHQVLRQHG
WKHDOLJQPHQWRIWKHEHOWLVFRUUHFW,WLVKRZHYHU
possible for the belt to be pushed to one side due to the
user’s running style (e.g. more weight on one foot). The
alignment of the belt is adjusted by turning the two bolts
at the back of the treadmill.
ALIGN THE BELT ACCORDING TO THE FOLLOWING
INSTRUCTIONS:
1. Turn the power switch on and increase the treadmill’s
speed to 5 km/h (3 mph).
2. If the belt drifts to the left, turn the left adjustment
bolt ¼ turn clockwise and the right adjustment bolt 1/8
turn anti-clockwise. If the belt drifts to the right, turn
the right adjustment bolt ¼ turn clockwise and the left
adjustment bolt ¼ turn anti-clockwise.
3. If the belt remains centered the adjustment is correct.
If not, continue to make small adjustments as above
until the belt is correctly aligned. If the belt is allowed
run across to one side for long periods of time the edges
of the belt may be damaged and the treadmill may not
continue to operate correctly. Any damage to the belt
caused by the lack of necessary adjustment will not be
covered by the warranty.
ADJUSTING THE BELT TENSION
The belt must be tensioned if it begins to slip on the
rollers. In normal use, however, keep the belt as loose
as possible! The belt tension is adjusted by turning the
same screws as used for aligning the running belt. If
turning the screws will not effect the belt tension, please
contact your local Tunturi dealer.
1. Increase the treadmill’s speed to 5 km/h (3 mph).
2. Turn both adjustment screws an equal amount, ¼
turn clockwise.
3. Try to slow the belt down by holding onto the
handrails and braking as you walk (as if you were
walking downhill).
If the belt slips, turn another ¼ turn and repeat the test.
When braking heavily the belt may slip. If the belt keeps
slipping despite repeated adjustments, please contact
your local Tunturi dealer.
MALFUNCTIONS
NOTE! Despite continuous quality control, defects
and malfunctions caused by individual components may
occur in the equipment. In most cases it’s unnecessary
to take the whole device in for repair, as it’s usually
VXIÀFLHQWWRUHSODFHWKHGHIHFWLYHSDUW$OZD\VJLYH
the model, serial number of your equipment and in
case of malfunctions also conditions of use, nature of
malfunction and any error code.
When you encounter unusual behavior from the treadmill,
simply turn the power switch off, wait 1 minute and turn
the power switch on to reset the treadmill. This should
clear incidental errors and ready the treadmill for normal
operation again. If after you have reset the treadmill
by turning the power switch off and on again, and the
treadmill is still not operational, contact your local Tunturi
dealer for service.
If you require spare parts, always give the model, serial
number of your equipment and the spare part number for
the part you need. The spare part list is at the back of this
manual. Use only spare parts mentioned in the spare part
list.
ERROR CODES
The console will display information about operational
faults.
SPEED STALL / E1. Call the dealer for service.
SPEED RUNAWAY / E3. Ensure correct usage of the
treadmill. Do not push the belt with your feet. Turn the
power switch off, wait 1 minute and turn the power switch
on again. If treadmill recovers to normal operation, you
may continue to use the treadmill. Otherwise, call the
dealer for service.
LIFT MOTOR ERROR. If the lift motor works improperly,
the console’s Elevation window will display “OFF”. The
treadmill is still operational except the elevation function.
You can still use the treadmill. Ensure correct usage of the
treadmill. Do not overload the lift motor by continuously
changing the elevation. Turn the power switch off, wait 20
minutes and turn the power switch on again. If treadmill
does not recover to normal operation, call the dealer for
service.
If any other error codes show up, call the dealer for
service.
MOVING AND
STORAGE
You can fold up the T70/T80 treadmills to space saving
storage position.
NOTE! When folding the treadmill make sure the
running deck is at 0 degrees. If folding when the running
deck is angled, this might lead to damage.
Ensure the transportation wheels are sideways. Turn off the
power switch and unplug the power cord from the wall
DQGWKHWUHDGPLOO7DNHKROGRIWKHDOXPLQLXPSURÀOHDW

1313
the rear end of the running base and lift the running base
XS3UHVVWKHKRUL]RQWDOEDULQWKHIROGLQJIUDPHZLWK\RXU
foot to lock the running base to the lower frame.
Move the T70 / T80 treadmill according to the following
instructions: turn off the power switch and unplug the
power cord from the wall and the treadmill. Stand
behind the treadmill and take hold of the aluminium
SURÀOHDWWKHUHDUHQGRIWKHWUHDGPLOO7LOWWKHUHDUHQG
of the equipment so that it rests on the transportation
wheels, and move the equipment by wheeling. Lower the
WUHDGPLOOFDUHIXOO\RQWRWKHÁRRU
NOTE! Transport the treadmill with extreme caution
over uneven surfaces, for example over a step. The
treadmill should never be transported upstairs using the
wheels over the steps, instead it must be carried. We
recommend that you use a protective base when
transporting the equipment. The running belt needs to be
realigned and centered after moving.
To prevent malfunctioning of the treadmill, store it in a
dry place with as little temperature variation as possible,
protected against dust. Always unplug the treadmill from
the electrical outlet when not in use.
TECHNICAL DATA
Length 212 cm
(storage position) 114 cm
Height 140 cm
(storage position) 193 cm
Width 95 cm
Weight T70 148 kg
Weight T80 150 kg
Running surface 53 x 152 cm
Speed 0,5-22,0 km/h
0,3-13,7 mph
Elevation range 0-12 %
Motor T70 3,0 hp
Motor T80 3,5 hp
T70 / T80 treadmill meets the requirements of the EU’s
EMC Directives on electromagnetic compatibility (89/
336/EEC) and electrical equipment designed for use
within certain voltage limits (73/23/EEC). This product
therefore carries the CE label. T70 / T80 treadmill
meets EN precision and safety standards
(Class SA, EN- 957, parts 1 and 6).
Due to our continuous policy of product development,
7XQWXULUHVHUYHVWKHULJKWWRFKDQJHVSHFLÀFDWLRQV
without notice.
CAUTION! The instructions must be followed carefully
in the assembly, use and maintenance of your equipment.
The warranty does not cover damage due to negligence
of the assembly, adjustment and maintenance instructions
GHVFULEHGKHUHLQ&KDQJHVRUPRGLÀFDWLRQVQRWH[SUHVVO\
approved by Tunturi Oy Ltd will void the user’s authority to
operate the equipment!
WE WISH YOU MANY ENJOYABLE TRAININGS WITH YOUR
NEW TUNTURI TRAINING PARTNER
T70 & T80 - OWNER’S MANUAL ENGLISH

105 T70 & T80 - .b<77g2+-( FINNISH

106
PARTS LIST
1 User interface base 1
2 Upright tube, LH (incl 21,52) 1
3 Upright tube, RH (incl 21, 52) 1
4 Handlebar, LH (incl. part 19,99,119) 1
5 Handlebar, RH (incl. part 19,99,119) 1
6 Reinforcement plate, LH 1
7 Reinforcement plate, RH 1
8 Frame 1
9 Safety bar bracket, LH 1
10 Safety bar bracket, RH 1
11 Incline structure frame A (incl. 51, 82) 1
12 Incline structure frame B 1
13 Front support frame 1
14 Switch bracket 1
15 Locking lever 1
16 Leaf spring 4
- User interface
(incl part 1, 18, 68,78,118 and membranes)
17 User Interface 1
18 Lower cover 1
19 Handlebar grip foam 2
20 Upright profile, LH 1
21 Upright profile, RH 1
22 Safety key 1
23 Anti-slip mats, LH 1
24 Anti-slip mats, RH 1
25 Side landing, LH (incl. 24) 1
26 Side landing, RH (incl. 24) 1
27 Motor cover 1
28 Running deck 1
29 Running belt 1
30 Rear roller 1
31 Front roller 1
32 Motor, 230V 1
- Motor, 110V 1
33 Speed sensor 1
34 Lift motor, 230V 1
- Lift motor, 110V 1
35 Drive belt 1
36 Frame end cap 2
37 Overcurrent protector, 12A 1
- Overcurrent protector, 24A 1
38 ON/OFF switch 1
39 Power cable 1
40 Power socket 1
41 Rear end cap, LH 1
42 Rear end cap, RH 1
43 Lubrication cap 2
44 Lubrication sleeve 2
45 Side cover, LH 1
46 Side cover, RH 1
- Lubrication tube set (incl. 47.48 and 49)
47 Lubrication base, LH 1
48 Lubrication base, RH 1
49 Lubrication conduit 1
50 Rubber bumper 30*35*M6mm 4
51 Rubber pad 45*36*10mm 6
52 Upright profile foam cap 4
53 Wheel 50mm 4
54 Wheel 38mm 2
55 Belt guide 2
56 Gas spring, RH 1
57 Gas spring, LH 1
58 Wheel 60mm 2
59 Power board, 230V 1
- Power board, 110V 1
60 Transformer, EUR 1
61 Filter, EUR 1
62 Ferrite 1
63 Plastic fixer 4*200mm 2
64 Plastic fixer 2.5*100MM 2
65 Through-leadig rubber 1
66 Wire holder 2
67 Fixer 1
- Wire set (incl. 68.69 and 70)
68 Upper wire 650mm 1
69 Middle wire 1250mm 1
70 Lower wire 380mm 1
71 Grounding wire 1
- Wire set 2, (incl. 72-76)
72 Wire 53mm 1
73 Wire 45mm 1
74 Wire 180mm 1
75 Wire 230mm 2
76 Wire 70mm 1
77 Safety bar 1
78 M4x6 ISO 7380 Screw 24
79 Washer 4.5*9.7mm 4
80 M4 DIN 6798J Star Washer 2
81 Spring 1
82 M4x12 ISO 7380 Screw 25
83 M6x20 ISO 7380 Screw 10
84 Lift motor cover 1
85 E-shape washer 2
86 M10x25 DIN 7991 Countersunk head screw 8
87 M6x30 DIN 7991 Countersunk head screw 4
88 4x8 DIN 968 Screw 2
89 M10x37 ISO 7380 Hexagon socket cap screw 2
90 M13 DIN 125 Washer 2
91 Washer 4
92 Fixing tube 2
93 M10 DIN 985 Nut 7
94 M8x42 ISO 7380 Hexagon socket cap screw 2
95 M8x55 DIN 912 Hexagon socket cap screw 3
96 M8 DIN 125 Washer 4
97 M8x55 ISO 4032 Screw 1
98 M10x40 ISO 4032 Screw 1
99 4x16 DIN 968 Screw 6
100 Fixing bolt 2
101 M8x25 ISO 7380 Hexagon socket cap screw 2
102 M8x45 ISO 7380 Hexagon socket cap screw 2
103 M10x12 ISO 4032 Screw 2
104 M8x20 ISO 7380 Hexagon socket cap screw 18
105 4x12 DIN 968 Screw 4
106 Nylon nut 10
107 Fixing tube 6
108 M8x15 ISO 7380 Hexagon socket cap screw 1
109 Washer 15
110 M10x25 ISO 7380 Hexagon socket cap screw 4
111 M8 DIN 125 Washer 4
112 M8x26 ISO 7380 Hexagon socket cap screw 2
113 M8x40 ISO 7380 Hexagon socket cap screw 2
114 M8x40 ISO 7380 Hexagon socket cap screw 2
115 M4x6 DIN 7500 C Screw 11
116 M3x10 DIN 7991 Countersunk head screw 2
117 Fixer 1
118 Selection dial 1
119 Hand-pulse set 2
- Membrane set 1
- Hardware kit 1
- Owner’s manual 1
- Label set 1
- Warranty booklet 1

107
T70, T80 EXPLOIDED VIEW 10TUT70X00
10TUT80X00

108108
O W N E R ’ S M A N U A L
Benelux
Accell Fitness Benelux
Koningsbeltweg 51
1329 AE ALMERE
The Netherlands
Tel: [phone]
Fax: + 31 36 5460055
Scandinavia
Accell Fitness Scandinavia
Varusmestarintie 26
20361 TURKU
Finland
Tel: [phone]
Fax: [phone]
Germany
Accell Fitness Deutschland
P/a Koningsbeltweg 51
1329 AE ALMERE
The Netherlands
Tel: [phone]
Fax: + 31 36 5460055
United Kingdom
Accell Fitness United Kingdom
Boland House
Nottingham South Industrial Estate
Ruddington Lane
Wilford
Nottingham NG11 7EP
United Kingdom
Tel: [phone]
Fax: [phone]
North America
Accell Fitness North America Inc.
130 Hayward Ave, Suite 2
N2C 2E4
Kitchener, ON Canada
Tel. [phone]
Fax: [phone]
ZZZDFFHOO¿WQHVVFRP
www.tunturi.com