IV. How to Use
1. Place usable cooking utensils in the center of the top plate and plug in, the LCD panel will
flash. The device is now on standby ode.
2. Now press the ON/OFF switch once to turn the induction hotplate on. The control light on
the “Hotpot” will be lit. The preset power "1600W" and the device starts working .With the
"+ or “-” keys, you can change the power settings at any ti e within a range of 120W –
2000W.
3. Stir-Fry function. Press the function key “Stir-Fry”. The preset power is “2000W”.
4. Fry function. Press the function key “Fry”. The preset te perature of “230oC” is selected
and the device turns on. With the “+” or “-“keys, you can change the te perature at any
ti e in a range of 110 – 270oC.
5. Steam function. Press the function key “Steam”. The device will first boil water at high
power before switching to oderate power for stea ing. It will turn off auto atically after 30
inutes.
6. Warm function. Press the function key “Warm”. The device will work towards 70oC. It will
auto atically adjust the device te perature to aintain at about “70o C.
7. For “Soup” and “Congee” functions, the power is preset. The device will auto atically
control the power by using oderate te perature to cook first, then adjust to high
te perature to boil and finally switch to slow fire to stew.
8. Delay-Start function can be used with “Steam”, “Soup” and “Congee” functions only to
delay the start of your cooking. Maxi u is 60 inutes. To use it, press “Pre-Set” key first.
The 5 in indicator light will flash to show that it now in the “Pre-Set” ode. The default
function is “Congee”. You ay select “Steam” or “Soup” if you desire, then press “Pre-
Set” key again to adjust the per-set ti e. The “Soup” if you desire, the press “Pre-Set”
key again to adjust the pre-set ti e. The device will start to function accordingly when the
pre-set ti e arrives. When in pre-set ode, you can press “Pre-Set” key again to cancel.
Note that “Pre-Set” will not respond if you are already in cooking ode.
9. Set-Time function. You can use the “Set-Time” function with the “Hotpot”, “Stir-Fry”,
“Fry”, “Steam” and “Warm” to set the ending ti e. Maxi u is 60 inutes. To use it,
select one of the 5 functions. Then press “Set-Time” key and the 5 in indicator light will
flash to show that it is now in the “Set-Time” ode. Press the “Set-Time” key to adjust the
ti e. When in “Set-Time” ode, you can press “Set-Time” key to adjust the ti e. The
device will turn off at the end of ti e you set. To cancel ti e set, you can select any other
functions.
10. Once the cooking or war ing process is finished, press “ON/OFF” to turn it off and
disconnect the ain plug fro the outlet.
5