Turbosound Tcs122/64wh User manual

TCS Passive Series

TCS62 (WH), TCS122/64 (WH), TCS122/96 (WH), TCS122/94 (WH),

TCS152/64 (WH), TCS152/96 (WH), TCS152/94 (WH), TCS115B (WH),

TCS218B (WH), TCS110B (WH), TCS212B (WH)

Arrayable Full Range Loudspeakers and Subwoofers for Installation Applications

2Quick Start Guide 3TCS Passive series

Terminals marked with this symbol carry

electrical current of sucient magnitude

to constitute risk of electric shock.

Use only high-quality professional speaker cables with

¼"TS or twist-locking plugs pre-installed. Allother

installation or modication should be performed only

by qualiedpersonnel.

This symbol, wherever it appears,

alertsyou to the presence of uninsulated

dangerous voltage inside the

enclosure-voltage that may be sucient to constitute a

risk ofshock.

This symbol, wherever it appears,

alertsyou to important operating and

maintenance instructions in the

accompanying literature. Please read the manual.

Caution

To reduce the risk of electric shock, donot

remove the top cover (or the rear section).

No user serviceable parts inside. Refer servicing to

qualied personnel.

Caution

To reduce the risk of re or electric shock,

do not expose this appliance to rain and

moisture.The apparatus shall not be exposed to dripping

or splashing liquids and no objects lled with liquids,

suchas vases, shall be placed on the apparatus.

Caution

These service instructions are for use

by qualied service personnel only.

Toreduce the risk of electric shock do not perform any

servicing other than that contained in the operation

instructions. Repairs have to be performed by qualied

servicepersonnel.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding-type plug

has two blades and a third grounding prong.The wide

blade or the third prong are provided for your safety. Ifthe

provided plug does not t into your outlet, consult an

electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. Use only attachments/accessories specied by

themanufacturer.

12. Use only with the

cart, stand, tripod, bracket,

or table specied by the

manufacturer, orsold with

the apparatus. When a cart

is used, use caution when

moving the cart/apparatus

combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or

when unused for long periods of time.

14. Refer all servicing to qualied service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power supply cord or plug

is damaged, liquid has been spilled or objects have fallen

into the apparatus, the apparatus has been exposed

to rain or moisture, does not operate normally, or has

beendropped.

15. The apparatus shall be connected to a MAINS socket

outlet with a protective earthing connection.

16. Where the MAINS plug or an appliance coupler is

used as the disconnect device, the disconnect device shall

remain readily operable.

17. Correct disposal of this

product:This symbol indicates that

this product must not be disposed

of with household waste,

according to the WEEE Directive

(2012/19/EU) and your national

law.This product should be taken

to a collection center licensed for the recycling of waste

electrical and electronic equipment (EEE).The

mishandling of this type of waste could have a possible

negative impact on the environment and human health

due to potentially hazardous substances that are generally

associated with EEE. At the same time, your cooperation

in the correct disposal of this product will contribute to

the ecient use of natural resources. For more

information about where you can take your waste

equipment for recycling, please contact your local city

oce, or your household waste collection service.

18. Do not install in a conned space, such as a book

case or similar unit.

19. Do not place naked ame sources, such as lighted

candles, on the apparatus.

20. Please keep the environmental aspects of battery

disposal in mind. Batteries must be disposed-of at a

battery collection point.

21. Use this apparatus in tropical and/or

moderate climates.

MUSIC Group accepts no liability for any loss which

may be suered by any person who relies either

wholly or in part upon any description, photograph,

or statement contained herein.Technical specications,

appearances and other information are subject to

change without notice. All trademarks are the property

of their respective owners. MIDAS, KLARK TEKNIK,

LAB GRUPPEN, LAKE,TANNOY, TURBOSOUND,

TC ELECTRONIC,TC HELICON,BEHRINGER and BUGERA

are trademarks or registered trademarks of MUSIC Group

For the applicable warranty terms and conditions

and additional information regarding MUSIC Group’s

LimitedWarranty, please see complete details online at

music-group.com/warranty.

Las terminales marcadas con este símbolo

transportan corriente eléctrica de

magnitud suciente como para constituir

un riesgo de descarga eléctrica. Utilice solo cables de

altavoz profesionales y de alta calidad con conectores

TS de 6,3 mm o de bayoneta prejados. Cualquier otra

instalación o modicación debe ser realizada únicamente

por un técnico cualicado.

Este símbolo, siempre que aparece,

leadvierte de la presencia de voltaje

peligroso sin aislar dentro de la caja;

estevoltaje puede ser suciente para constituir un riesgo

dedescarga.

Este símbolo, siempre que aparece,

leadvierte sobre instrucciones operativas

y de mantenimiento que aparecen en la

documentación adjunta. Por favor, lea el manual.

Atención

Para reducir el riesgo de descarga

eléctrica, no quite la tapa (o la parte

posterior). No hay piezas en el interior del equipo que

puedan ser reparadas por el usuario. Si es necesario,

póngase en contacto con personal cualicado.

Atención

Para reducir el riesgo de incendio o

descarga eléctrica, no exponga este

aparato a la lluvia, humedad o alguna otra fuente que

pueda salpicar o derramar algún líquido sobre el aparato.

Nocoloque ningún tipo de recipiente para líquidos sobre

el aparato.

Atención

Las instrucciones de servicio deben

llevarlas a cabo exclusivamente personal

cualicado. Para evitar el riesgo de una descarga eléctrica,

no realice reparaciones que no se encuentren descritas

en el manual de operaciones. Lasreparaciones deben ser

realizadas exclusivamente por personalcualicado.

1. Lea las instrucciones.

2. Conserve estas instrucciones.

3. Preste atención a todas las advertencias.

4. Siga todas las instrucciones.

5. No use este aparato cerca del agua.

6. Limpie este aparato con un paño seco.

7. No bloquee las aberturas de ventilación. Instale el

equipo de acuerdo con las instrucciones del fabricante.

8. No instale este equipo cerca de fuentes de calor

tales como radiadores, acumuladores de calor, estufas u

otros aparatos (incluyendo amplicadores) que puedan

producir calor.

9. No elimine o deshabilite nunca la conexión a tierra

del aparato o del cable de alimentación de corriente.

Unenchufe polarizado tiene dos polos, uno de los cuales

tiene un contacto más ancho que el otro. Una clavija con

puesta a tierra dispone de tres contactos: dos polos y la

puesta a tierra. El contacto ancho y el tercer contacto,

respectivamente, son los que garantizan una mayor

seguridad. Si el enchufe suministrado con el equipo no

concuerda con la toma de corriente, consulte con un

electricista para cambiar la toma de corriente obsoleta.

10. Coloque el cable de suministro de energía de manera

que no pueda ser pisado y que esté protegido de objetos

alados. Asegúrese de que el cable de suministro de

energía esté protegido, especialmente en la zona de la

clavija y en el punto donde sale del aparato.

11. Use únicamente los dispositivos o accesorios

especicados por el fabricante.

12. Use únicamente la

carretilla, plataforma,

trípode, soporte o mesa

especicados por el

fabricante o suministrados

junto con el equipo.

Altransportar el equipo,

tenga cuidado para evitar

daños y caídas al tropezar con algún obstáculo.

13. Desenchufe el equipo durante tormentas o si no va a

utilizarlo durante un periodo largo.

14. Confíe las reparaciones únicamente a servicios

técnicos cualicados. La unidad requiere mantenimiento

siempre que haya sufrido algún daño, si el cable de

suministro de energía o el enchufe presentaran daños,

sehubiera derramado un líquido o hubieran caído objetos

dentro del equipo, si el aparato hubiera estado expuesto

a la humedad o la lluvia, si ha dejado de funcionar de

manera normal o si ha sufrido algún golpe o caída.

15. Al conectar la unidad a la toma de corriente eléctrica

asegúrese de que la conexión disponga de una unión

atierra.

16. Si el enchufe o conector de red sirve como único

medio de desconexión, éste debe ser accesiblefácilmente.

17. Cómo debe deshacerse de

este aparato: Este símbolo indica

que este aparato no debe ser

tratado como basura orgánica,

según lo indicado en la Directiva

WEEE (2012/19/EU) y a las

normativas aplicables en su país.

En lugar de ello deberá llevarlo al punto limpio más

cercano para el reciclaje de sus elementos eléctricos/

electrónicos (EEE). Al hacer esto estará ayudando a

prevenir las posibles consecuencias negativas para el

medio ambiente y la salud que podrían ser provocadas por

una gestión inadecuada de este tipo de aparatos. Además,

el reciclaje de materiales ayudará a conservar los recursos

naturales. Para más información acerca del reciclaje de

este aparato, póngase en contacto con el Ayuntamiento

de su ciudad o con el punto limpio local.

18. No instale esta unidad en un espacio muy reducido,

tal como encastrada en una librería o similar.

19. No coloque objetos con llama, como una vela

encendida, sobre este aparato.

20. Tenga presentes todas las advertencias relativas

al reciclaje y correcta eliminación de las pilas. Las pilas

deben ser siempre eliminadas en un punto limpio y nunca

con el resto de la basura orgánica.

21. Use este aparato en rangos de temperatura

moderados y/o tropicales.

MUSIC Group no admite ningún tipo de responsabilidad

por cualquier daño o pérdida que pudiera sufrir

cualquier persona por conar total o parcialmente en la

descripciones, fotografías o armaciones contenidas en

este documento. Las especicaciones técnicas, imágenes

y otras informaciones contenidas en este documento

están sujetas a modicaciones sin previo aviso.Todas las

marcas comerciales que aparecen aquí son propiedad

de sus respectivos dueños. MIDAS, KLARK TEKNIK,

LAB GRUPPEN, LAKE,TANNOY, TURBOSOUND,

TC ELECTRONIC,TC HELICON, BEHRINGER y BUGERA

son marcas comerciales o marcas registradas

de MUSIC Group IP Ltd. © MUSIC Group IP Ltd.

2017 Reservados todos los derechos.

Si quiere conocer los detalles y condiciones aplicables

de la garantía así como información adicional sobre la

Garantía limitada de MUSIC Group, consulte online toda la

información en la web music-group.com/warranty.

Important Safety

Instructions

LEGAL DISCLAIMER

Instrucciones de

seguridad

NEGACIÓN LEGAL

GARANTÍA LIMITADA

LIMITED WARRANTY

4Quick Start Guide 5TCS Passive series

Les points repérés par ce symbole portent

une tension électrique susante pour

constituer un risque d’électrocution.

Utilisez uniquement des câbles d’enceintes professionnels

de haute qualité avec ches Jack mono 6,35 mm ou ches

à verrouillages déjà installées. Touteautre installation ou

modication doit être eectuée uniquement par un

personnel qualié.

Ce symbole avertit de la présence d’une

tension dangereuse et non isolée à

l’intérieur de l’appareil - elle peut

provoquer des chocs électriques.

Attention

Ce symbol signale les consignes

d’utilisation et d’entre !Tien importantes

dans la documentation fournie. Lisez les consignes de

sécurité du manuel d’utilisation de l’appareil.

Attention

Pour éviter tout risque de choc électrique,

ne pas ouvrir le capot de l’appareil ni

démonter le panneau arrière. L’intérieur de l’appareil

ne possède aucun élément réparable par l’utilisateur.

Laissertoute réparation à un professionnel qualié.

Attention

Pour réduire les risques de feu et de choc

électrique, n’exposez pas cet appareil à la

pluie, à la moisissure, aux gouttes ou aux éclaboussures.

Ne posez pas de récipient contenant un liquide sur

l’appareil (un vase par exemple).

Attention

Ces consignes de sécurité et d’entretien

sont destinées à un personnel qualié.

Pouréviter tout risque de choc électrique, n’eectuez

aucune réparation sur l’appareil qui ne soit décrite par le

manuel d’utilisation. Les éventuelles réparations doivent

être eectuées uniquement par un technicien spécialisé.

1. Lisez ces consignes.

2. Conservez ces consignes.

3. Respectez tous les avertissements.

4. Respectez toutes les consignes d’utilisation.

5. N’utilisez jamais l’appareil à proximité d’un liquide.

6. Nettoyez l’appareil avec un chion sec.

7. Veillez à ne pas empêcher la bonne ventilation de

l’appareil via ses ouïes de ventilation. Respectezles

consignes du fabricant concernant l’installation

del’appareil.

8. Ne placez pas l’appareil à proximité d’une source

de chaleur telle qu’un chauage, une cuisinière ou tout

appareil dégageant de la chaleur (y compris un ampli

depuissance).

9. Ne supprimez jamais la sécurité des prises bipolaires

ou des prises terre. Les prises bipolaires possèdent deux

contacts de largeur diérente. Leplus large est le contact

de sécurité. Les prises terre possèdent deux contacts plus

une mise à la terre servant de sécurité. Si la prise du bloc

d’alimentation ou du cordon d’ali-mentation fourni ne

correspond pas à celles de votre installation électrique,

faites appel à un électricien pour eectuer le changement

de prise.

10. Installez le cordon d’alimentation de telle façon

que personne ne puisse marcher dessus et qu’il soit

protégé d’arêtes coupantes. Assurez-vous que le cordon

d’alimentation est sufsamment protégé, notamment au

niveau de sa prise électrique et de l’endroit où il est relié à

l’appareil; cela est également valable pour une éventuelle

rallonge électrique.

11. Utilisez exclusivement des accessoires et des

appareils supplémentaires recommandés par lefabricant.

12. Utilisez

exclusivement des

chariots, des diables,

desprésentoirs, despieds

et des surfaces de

travail recommandés

par le fabricant ou

livrés avec le produit.

Déplacezprécautionneusement tout chariot ou diable

chargé pour éviter d’éventuelles blessures en cas dechute.

13. Débranchez l’appareil de la tension secteur en cas

d’orage ou si l’appareil reste inutilisé pendant une longue

période de temps.

14. Les travaux d’entretien de l’appareil doivent

être eectués uniquement par du personnel qualié.

Aucunentretien n’est nécessaire sauf si l’appareil est

endommagé de quelque façon que ce soit (dommagessur

le cordon d’alimentation ou la prise par exemple), siun

liquide ou un objet a pénétré à l’intérieur du châssis,

si l’appareil a été exposé à la pluie ou à l’humidité, s’il ne

fonctionne pas correctement ou à la suite d’une chute.

15. L’appareil doit être connecté à une prise secteur

dotée d’une protection par mise à la terre.

16. La prise électrique ou la prise IEC de tout appareil

dénué de bouton marche/arrêt doit rester accessible

enpermanence.

17. Mise au rebut appropriée de

ce produit: Ce symbole indique

qu’en accord avec la directive DEEE

(2012/19/EU) et les lois en vigueur

dans votre pays, ce produit ne doit

pas être jeté avec les déchets

ménagers. Ce produit doit être

déposé dans un point de collecte agréé pour le recyclage

des déchets d’équipements électriques et électroniques

(EEE). Une mauvaise manipulation de ce type de déchets

pourrait avoir un impact négatif sur l’environnement et la

santé à cause des substances potentiellement

dangereuses généralement associées à ces équipements.

En même temps, votre coopération dans la mise au rebut

de ce produit contribuera à l’utilisation ecace des

ressources naturelles. Pour plus d’informations sur

l’endroit où vous pouvez déposer vos déchets

d’équipements pour le recyclage, veuillez contacter votre

mairie ou votre centre local de collecte des déchets.

18. N’installez pas l’appareil dans un espace conné tel

qu’une bibliothèque ou meuble similaire.

19. Ne placez jamais d’objets enammés, tels que des

bougies allumées, sur l’appareil.

20. Gardez à l’esprit l’impact environnemental lorsque

vous mettez des piles au rebus. Les piles usées doivent

être déposées dans un point de collecte adapté.

21. Utilisez l’appareil dans un climat tropical

et/ou modéré.

MUSIC Group ne peut être tenu pour responsable pour

toute perte pouvant être subie par toute personne

se ant en partie ou en totalité à toute description,

photographie ou armation contenue dans ce

document. Les caractéristiques, l’apparence et d’autres

informations peuvent faire l’objet de modications

sans notication.Toutes les marques appartiennent à

leurs propriétaires respectifs. MIDAS, KLARK TEKNIK,

LAB GRUPPEN, LAKE,TANNOY, TURBOSOUND,

TC ELECTRONIC,TC HELICON,BEHRINGER etBUGERA

sont des marques ou marques déposées de MUSIC Group

Pour connaître les termes et conditions de garantie

applicables, ainsi que les informations supplémentaires

et détaillées sur la Garantie Limitée de MUSIC Group,

consultez le site Internet music-group.com/warranty.

Vorsicht

Die mit dem Symbol markierten

Anschlüsse führen so viel Spannung,

dassdie Gefahr eines Stromschlags besteht.

Verwenden Sie nur hochwertige, professionelle

Lautsprecherkabel mit vorinstallierten 6,35 mm

MONO-Klinkensteckern oder Lautsprecherstecker

mit Drehverriegelung. Alle anderen Installationen

oder Modikationen sollten nur von qualiziertem

Fachpersonal ausgeführt werden.

Achtung

Um eine Gefährdung durch Stromschlag

auszuschließen, darf die Geräteabdeckung

bzw. Geräterückwand nicht abgenommen werden.

ImInnern des Geräts benden sich keine vom Benutzer

reparierbaren Teile. Reparaturarbeiten dürfen nur von

qualiziertem Personal ausgeführt werden.

Achtung

Um eine Gefährdung durch Feuer bzw.

Stromschlag auszuschließen, darf dieses

Gerät weder Regen oder Feuchtigkeit ausgesetzt werden

noch sollten Spritzwasser oder tropfende Flüssigkeiten

in das Gerät gelangen können. Stellen Sie keine mit

Flüssigkeit gefüllten Gegenstände, wie z. B.Vasen,

aufdasGerät.

Achtung

Die Service-Hinweise sind nur durch

qualiziertes Personal zu befolgen.

Umeine Gefährdung durch Stromschlag zu vermeiden,

führen Sie bitte keinerlei Reparaturen an dem Gerät

durch, die nicht in der Bedienungsanleitung beschrieben

sind. Reparaturen sind nur von qualiziertem

Fachpersonaldurchzuführen.

1. Lesen Sie diese Hinweise.

2. Bewahren Sie diese Hinweise auf.

3. Beachten Sie alleWarnhinweise.

4. Befolgen Sie alle Bedienungshinweise.

5. Betreiben Sie das Gerät nicht in der Nähe vonWasser.

6. Reinigen Sie das Gerät mit einem trockenenTuch.

7. Blockieren Sie nicht die Belüftungsschlitze. Beachten

Sie beim Einbau des Gerätes die Herstellerhinweise.

8. Stellen Sie das Gerät nicht in der Nähe von

Wärmequellen auf. SolcheWärmequellen sind z. B.

Heizkörper, Herde oder andereWärme erzeugende Geräte

(auchVerstärker).

9. Entfernen Sie in keinem Fall die

Sicherheitsvorrichtung von Zweipol- oder geerdeten

Steckern. Ein Zweipolstecker hat zwei unterschiedlich

breite Steckkontakte. Ein geerdeter Stecker hat zwei

Steckkontakte und einen dritten Erdungskontakt.

Derbreitere Steckkontakt oder der zusätzliche

Erdungskontakt dient Ihrer Sicherheit. Falls das

mitgelieferte Steckerformat nicht zu Ihrer Steckdose

passt, wenden Sie sich bitte an einen Elektriker, damit die

Steckdose entsprechend ausgetauscht wird.

10. Verlegen Sie das Netzkabel so, dass es vor

Tritten und scharfen Kanten geschützt ist und nicht

beschädigt werden kann. Achten Sie bitte insbesondere

im Bereich der Stecker, Verlängerungskabel und an

der Stelle, an der das Netzkabel das Gerät verlässt,

aufausreichendenSchutz.

11. Das Gerät muss jederzeit mit intaktem Schutzleiter

an das Stromnetz angeschlossen sein.

12. Sollte der Hauptnetzstecker oder eine

Gerätesteckdose die Funktionseinheit zum Abschalten

sein, muss diese immer zugänglich sein.

13. Verwenden Sie nur Zusatzgeräte/Zubehörteile,

dielaut Hersteller geeignet sind.

14. Verwenden

Sie nurWagen,

Standvorrichtungen,

Stative, Halter oder Tische,

die vom Hersteller benannt

oder im Lieferumfang

des Geräts enthalten

sind. Falls Sie einen

Wagen benutzen, seien Sie vorsichtig beim Bewegen

derWagen-Gerätkombination, umVerletzungen durch

Stolpern zuvermeiden.

15. Ziehen Sie den Netzstecker bei Gewitter oder wenn

Sie das Gerät längere Zeit nicht benutzen.

16. Lassen Sie alleWartungsarbeiten nur von

qualiziertem Service-Personal ausführen. EineWartung

ist notwendig, wenn das Gerät in irgendeinerWeise

beschädigt wurde (z. B. Beschädigung des Netzkabels oder

Steckers), Gegenstände oder Flüssigkeit in das Geräteinnere

gelangt sind, das Gerät Regen oder Feuchtigkeit ausgesetzt

wurde, das Gerät nicht ordnungsgemäß funktioniert oder

auf den Boden gefallen ist.

17. Korrekte Entsorgung dieses

Produkts: Dieses Symbol weist

darauf hin, das Produkt

entsprechend derWEEE Direktive

(2012/19/EU) und der jeweiligen

nationalen Gesetze nicht

zusammen mit Ihren

Haushaltsabfällen zu entsorgen. DiesesProdukt sollte bei

einer autorisierten Sammelstelle für Recycling elektrischer

und elektronischer Geräte (EEE) abgegeben werden.

Wegen bedenklicher Substanzen, diegenerell mit

elektrischen und elektronischen Geräten in Verbindung

stehen, könnte eine unsachgemäße Behandlung dieser

Abfallart eine negative Auswirkung auf Umwelt und

Gesundheit haben. Gleichzeitig gewährleistet Ihr Beitrag

zur richtigen Entsorgung dieses Produkts die eektive

Nutzung natürlicher Ressourcen. Fürweitere

Informationen zur Entsorgung Ihrer Geräte bei einer

Recycling-Stelle nehmen Sie bitte Kontakt zum

zuständigen städtischen Büro, Entsorgungsamt oder zu

Ihrem Haushaltsabfallentsorgerauf.

18. Installieren Sie das Gerät nicht in einer beengten

Umgebung, zum Beispiel Bücherregal oder ähnliches.

19. Stellen Sie keine Gegenstände mit oenen

Flammen, etwa brennende Kerzen, auf das Gerät.

20. Beachten Sie bei der Entsorgung von Batterien

den Umweltschutz-Aspekt. Batterien müssen bei einer

Batterie-Sammelstelle entsorgt werden.

21. Verwenden Sie das Gerät in tropischen und/oder

gemäßigten Klimazonen.

MUSIC Group übernimmt keine Haftung für Verluste,

die Personen entstanden sind, die sich ganz oder

teilweise auf hier enthaltene Beschreibungen,

Fotos oder Aussagen verlassen haben.Technische Daten,

Erscheinungsbild und andere Informationen können

ohne vorherige Ankündigung geändert werden.

AlleWarenzeichen sind Eigentum der jeweiligen

Inhaber. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE,

TANNOY, TURBOSOUND,TC ELECTRONIC,TC HELICON,

BEHRINGER und BUGERA sindWarenzeichen oder

eingetrageneWarenzeichen der MUSIC Group IP Ltd.

Die geltenden Garantiebedingungen und zusätzliche

Informationen bezüglich der von MUSIC Group

gewährten beschränkten Garantie nden Sie online unter

music-group.com/warranty.

Consignes de sécurité

DÉNI LÉGAL

GARANTIE LIMITÉE

Wichtige

Sicherheitshinweise

HAFTUNGSAUSSCHLUSS

BESCHRÄNKTE GARANTIE

6Quick Start Guide 7TCS Passive series

Aviso!

Terminais marcados com o símbolo

carregam corrente elétrica de magnitude

suciente para constituir um risco de choque elétrico.

Use apenas cabos de alto-falantes de alta qualidade

com pluguesTS de ¼" ou plugues com trava de torção

pré-instalados.Todas as outras instalações e modicações

devem ser efetuadas por pessoasqualicadas.

Este símbolo, onde quer que o encontre,

alerta-o para a leitura das instruções de

manuseamento que acompanham o

equipamento. Por favor leia o manual de instruções.

Atenção

De forma a diminuir o risco de choque

eléctrico, não remover a cobertura

(ouasecção de trás). Não existem peças substituíveis por

parte do utilizador no seu interior. Para esse efeito recorrer

a um técnico qualicado.

Atenção

Para reduzir o risco de incêndios ou

choques eléctricos o aparelho não deve ser

exposto à chuva nem à humidade. Além disso, não deve

ser sujeito a salpicos, nem devem ser colocados em cima

do aparelho objectos contendo líquidos, tais como jarras.

Atenção

Estas instruções de operação devem ser

utilizadas, em exclusivo, por técnicos de

assistência qualicados. Para evitar choques eléctricos

não proceda a reparações ou intervenções, que não as

indicadas nas instruções de operação, salvo se possuir as

quali-cações necessárias. Para evitar choques eléctricos

não proceda a reparações ou intervenções, que não as

indicadas nas instruções de operação. Só o deverá fazer se

possuir as qualicações necessárias.

1. Leia estas instruções.

2. Guarde estas instruções.

3. Preste atenção a todos os avisos.

4. Siga todas as instruções.

5. Não utilize este dispositivo perto de água.

6. Limpe apenas com um pano seco.

7. Não obstrua as entradas de ventilação. Instale de

acordo com as instruções do fabricante.

8. Não instale perto de quaisquer fontes de calor

tais como radiadores, bocas de ar quente, fogões de

sala ou outros aparelhos (incluindo amplicadores)

que produzam calor.

9. Não anule o objectivo de segurança das chas

polarizadas ou do tipo de ligação à terra. Uma cha

polarizada dispõe de duas palhetas sendo uma mais larga

do que a outra. Uma cha do tipo ligação à terra dispõe

de duas palhetas e um terceiro dente de ligação à terra.

A palheta larga ou o terceiro dente são fornecidos para

sua segurança. Se a cha fornecida não encaixar na sua

tomada, consulte um electricista para a substituição da

tomada obsoleta.

10. Proteja o cabo de alimentação de pisadelas ou

apertos, especialmente nas chas, extensões, e no local

de saída da unidade. Certique-se de que o cabo eléctrico

está protegido.Verique particularmente nas chas, nos

receptáculos e no ponto em que o cabo sai doaparelho.

11. O aparelho tem de estar sempre conectado à rede

eléctrica com o condutor de protecção intacto.

12. Se utilizar uma cha de rede principal ou uma

tomada de aparelhos para desligar a unidade de

funcionamento, esta deve estar sempre acessível.

13. Utilize apenas ligações/acessórios especicados

pelofabricante.

14. Utilize apenas com

o carrinho, estrutura,

tripé, suporte, ou mesa

especicados pelo

fabricante ou vendidos

com o dispositivo.

Quandoutilizar um

carrinho, tenha cuidado ao

mover o conjunto carrinho/dispositivo para evitar danos

provocados pela terpidação.

15. Desligue este dispositivo durante as trovoadas

ou quando não for utilizado durante longos períodos

detempo.

16. Qualquer tipo de reparação deve ser sempre

efectuado por pessoal qualicado. É necessária uma

reparação sempre que a unidade tiver sido de alguma

forma danicada, como por exemplo: no caso do cabo

de alimentação ou cha se encontrarem danicados;

naeventualidade de líquido ter sido derramado ou

objectos terem caído para dentro do dispositivo; no caso

da unidade ter estado exposta à chuva ou à humidade;

seesta não funcionar normalmente, ou se tiver caído.

17. Correcta eliminação deste

produto: este símbolo indica que

o produto não deve ser eliminado

juntamente com os resíduos

domésticos, segundo a Directiva

REEE (2012/19/EU) e a legislação

nacional. Este produto deverá

ser levado para um centro de recolha licenciado para a

reciclagem de resíduos de equipamentos eléctricos e

electrónicos (EEE). O tratamento incorrecto deste tipo

de resíduos pode ter um eventual impacto negativo

no ambiente e na saúde humana devido a substâncias

potencialmente perigosas que estão geralmente

associadas aos EEE. Ao mesmo tempo, a sua colaboração

para a eliminação correcta deste produto irá contribuir

para a utilização eciente dos recursos naturais. Paramais

informação acerca dos locais onde poderá deixar o seu

equipamento usado para reciclagem, é favor contactar

os serviços municipais locais, a entidade de gestão de

resíduos ou os serviços de recolha de resíduosdomésticos.

18. Não instale em lugares connados, tais como

estantes ou unidades similares.

19. Não coloque fontes de chama, tais como velas

acesas, sobre o aparelho.

20. Favor, obedecer os aspectos ambientais de descarte

de bateria. Baterias devem ser descartadas em um ponto

de coletas de baterias.

21. Use este aparelho em climas tropicais

e/ou moderados.

O MUSIC Group não se responsabiliza por perda alguma

que possa ser sofrida por qualquer pessoa que dependa,

seja de maneira completa ou parcial, de qualquer

descrição, fotograa, ou declaração aqui contidas.

Dados técnicos, aparências e outras informações

estão sujeitas a modicações sem aviso prévio.

Todas as marcas são propriedade de seus respectivos

donos. MIDAS, KLARK TEKNIK, LAB GRUPPEN, LAKE,

TANNOY, TURBOSOUND,TC ELECTRONIC,TC HELICON,

BEHRINGER e BUGERA são marcas ou marcas

registradas do MUSIC Group IP Ltd. © MUSIC Group

Para obter os termos de garantia aplicáveis e condições e

informações adicionais a respeito da garantia limitada do

MUSIC Group, favor vericar detalhes na íntegra através

do website music-group.com/warranty.

注意

感電の.恐れがありますので、カ

バーやその他の部品を取り外

したり、開けたりしないでください。高品

質なプロ用スピーカーケーブル（¼" TS標準

ケーブルおよびツイストロッキングプラ

グケーブル）を使用してください。

注意

火事および感電の危険を防ぐ

ため、本装置を水分や湿気の

あるところには設置しないで下さい。装置

には決して水分がかからないように注意

し、花瓶など水分を含んだものは、装置の

上には置かないようにしてください。

注意

このマークが表示されている

箇所には、内部に高圧電流が

生じています。手を触れると感電の恐れが

あります。

注意

取り扱いとお手入れの方法に

ついての重要な説明が付属の

取扱説明書に記載されています。ご使用の

前に良くお読みください。

注意

1. 取扱説明書を通してご覧ください。

2. 取扱説明書を大切に保管してくだ

さい。

3. 警告に従ってください。

4. 指示に従ってください。

5. 本機を水の近くで使用しないでくだ

さい。

6. お手入れの際は常に乾燥した布巾を使

ってください。

7. 本機は、取扱説明書の指示に従い、

適切な換気を妨げない場所に設置してく

ださい。取扱説明書に従って設置してくだ

さい。

8. 本機は、電気ヒーターや温風機器、

ストーブ、調理台やアンプといった熱源か

ら離して設置してください。

9. ニ極式プラグおよびアースタイプ

(三芯)プラグの安全ピンは取り外さないで

ください。ニ極式プラグにはピンが二本つ

いており、そのうち一本はもう一方よりも幅

が広くなっています。アースタイプの三芯プ

ラグにはニ本のピンに加えてアース用のピ

ンが一本ついています。これらの幅の広い

ピン、およびアースピンは、安全のためのも

のです。備え付けのプラグが、お使いのコン

セントの形状と異なる場合は、電器技師に

相談してコンセントの交換をして下さい。

10. 電源コードを踏みつけたり、挟んだり

しないようご注意ください。電源コードや

プラグ、コンセント及び製品との接続には

十分にご注意ください。

11. すべての装置の接地(アース)が確保

されていることを確認して下さい。

12. 電源タップや

電源プラグは電

源遮断機として利

用されている場合

には、これが直ぐ

に操作できるよう

手元に設置して下

さい。

13. 付属品は本機製造元が指定したもの

のみをお使いください。

14. カートスタンド、三脚、ブラケット、

テーブルなどは、本機製造元が指定したも

の、もしくは本機の付属品となるもののみ

をお使いください。カートを使用しての運

搬の際は、器具の落下による怪我に十分ご

注意ください。

15. 雷雨の場合、もしくは長期間ご使用に

ならない場合は、電源プラグをコンセント

から抜いてください。

16. 故障の際は当社指定のサービス技術

者にお問い合わせください。電源コードも

しくはプラグの損傷、液体の装置内への浸

入、装置の上に物が落下した場合、雨や湿

気に装置が晒されてしまった場合、正常に

作動しない場合、もしくは装置を地面に落

下させてしまった場合など、いかなる形で

あれ装置に損傷が加わった場合は、装置

の修理・点検を受けてください。

17. 本製品に電源コード

が付属されている場合、

付属の電源コードは本製

品以外ではご使用いただ

けません。電源コードは

必ず本製品に付属された

電源コードのみご使用く

ださい。

18. ブックケースなどのような、閉じたス

ペースには設置しないでください。

19. 本機の上に点火した蝋燭などの裸火

を置かないでください。

20. 電池廃棄の際には、環境へのご配慮

をお願いします。電池は、かならず電池回

収場所に廃棄してください。

21. 本機器は熱帯気候および/または温

帯気候下でご使用ください。

ここに含まれる記述、写真、意見の全

体または一部に依拠して、いかなる人が

損害を生じさせた場合にも、MUSIC Group

は一切の賠償責任を負いません。技術

仕様、外観およびその他の情報は予告

なく変更になる場合があります。商標

はすべて、それぞれの所有者に帰属しま

す。MIDAS、KLARK TEKNIK、LAB GRUPPEN、

LAKE、TANNOY、TURBOSOUND、TC ELECTRONIC、

TC HELICON、BEHRINGERおよびBUGERAは

MUSIC Group IP Ltd.の商標または登録商標

です。© MUSIC Group IP Ltd. 2017無断転用

禁止。

適用される保証条件とMUSIC Groupの限定

保証に関する概要については、オンライン

上music-group.com/warrantyにて詳細をご確

認ください。

Instruções de Segurança

Importantes

LEGAL RENUNCIANTE

GARANTIA LIMITADA

安全にお使いいただくために

限定保証

法的放棄

8Quick Start Guide 9TCS Passive series

Thank you for choosing a TURBOSOUND loudspeaker product for your application. If you would like further information about this or any other TURBOSOUND product,

please visit our website at turbosound.com.

Unpacking the Loudspeaker

After unpacking the unit please check carefully for damage. If damage is found, please notify your supplier at once. You, the consignee, must instigate any claim.

Please retain all packaging in case of future re-shipment.

System Requirements – Passive and Bi-amped Loudspeakers

TCS62 2-way loudspeaker operates as a passive system and requires only one amplier channel. Theinput signal is divided between the low-frequency and high-

frequency drivers internally with a passivecrossover.

TCS122 and TCS152 are switchable passive / bi-amp 2-way loudspeakers. Passive operation (fullrange or with a subwoofer) requires 1 amplier channel and 1

controller channel. The input signal is divided between the low-frequency and high-frequency drivers internally with a passive crossover. Bi-ampoperation (full range

or with a subwoofer) requires 2 amplier channels and 2 controller channels, one for low frequencies one for high frequencies. The input signal is divided between the

low frequency and high frequency driver in the controller and the individual amplied signals are fed to the speaker input.

TCS218B subwoofer has a switchable input to allow operation in parallel or discrete modes. Paralleloperation connects both drivers in parallel internally. Operation

requires 1 amplier channel and 1 controller channel. Discrete operation connects each driver separately to the two channels of the input. Operation requires 1

amplier channel and a minimum of 1 controller channel.

TCS115B, TCS212B and TCS110B subwoofers operate as a passive system and require only one amplierchannel.

Correct controller settings for all models, horn variants and operation with subwoofers can be downloaded from the website, and are also available as presents for the

LMS series controllers.

To avoid wasting amplier power, you should use heavy-duty speaker cable, with a minimum wire size of 1.5 mm2(16 AWG), and preferably 2.5 mm2(14 AWG) for

longer runs. Use larger wire sizes for the TCS212B and TCS218B and speakers wired in parallel. For extreme cable lengths, be aware of cable impedance and resistive

losses. Always observe the correct polarity.

ࣝధ൦ಗ঄ᄋጽቬ᝻ܭЧధ

ܹᄋႄุߜڛᝐႄԁᬘǎᬎ

Ώၺࣝధ ¼'' TSᩛତ݁

ᄋᰵַ᠐˅ˋܧ٩ጴǎధᄋ߸ᜊួ

஠ڪᮍႁՍಬᄋ˅ˋցᤊᛢǎ

൦ಗ঄ଣᧉ১ַаߜڛఴ

ፑᎇᄋԁᬘႄԎధᝐႄԁᬘǎ

൦ಗ঄ଣᧉ১ಋ󰪀ᬅᄋ᧙᜷

ᄋΏၺԤ፦οឮ௛ǎឱ󰪀឵ధ

Угǎ

࠶

˟ᥙГᝐႄԁᬘឱӉ఼

ᮈᄧᑁ᭨૖ౝǎ᝻ܭа෦

ధԼΚၺ፦οΏၺᄋᦋǎឱ࠳፦ο

ᮋႁՍಬᄋ˅ˋցᤊᛢǎ

࠶

˟ᥙГᅍ༣ᝐႄԁᬘឱӉ

࠳൦᝻ܭᎷᭂ๹໾ິ˘ǎ

൦᝻ܭ˸ˁԼԫ๰͵໠ຶᄪధ๰͵ᄋࠕ

٩˸ˁԼᎷЦʾݡᔊၬ኏ǎ

࠶

፦οឮ௛௨ፍՍಬᄋ˅ˋ፦

οցΏၺᄋǎ˟ᥙГᝐႄԁ

ᬘᬕΏၺឮ௛˻ଣ҃ᄋܲឱӉᤊᛢ

ͶЦ߳፦οǎధ፦οڪᮍႁՍಬᄋ˅

ˋցᤊᛢǎ

1. ឱ󰪀឵ᤉឮ௛ǎ

2. ឱݱؔεߜᤉឮ௛ǎ

3. ឱญధᄋ᝞ᇩǎ

4. ឱᥗ߷ధᄋឮ௛ǎ

5. ឱӉڛ᭦ᤄබᄋڢஶΏၺశַǎ

6. ឱၺࣱ࣌ຎพశַǎ

7. ឱӉ܅܌ᤱ᮴Աǎ߸ᜊశַ௒ឱᥗ

ཱིԉࠓᄋឮ௛ǎ

8. ឱӉ࠳శַ߸ᜊڛམ຺ᬅᤄ

ݡ఍ජྠ༰ߖЦ߳ၸམ᧛ᄋ᝻ܭ

Ӌ઻ҫ஋٩ǎ

9. ឱӉሩᬕ౞মତ݁଍ڢତ݁ᄋ߸М

ᜊᎷǎ଍ڢତ݁௨ႁˑ˕ତ܌଍གྷԤʸ˕

଍ڢ݁౟ǎᔫᬥ᠏ଣΚᄋତ݁ˁᤡՍ১

ᄋତឱႄࢻట૲ʸ˕Սᤡᄋତǎ

10. ݱؔεઑႄ຺ጴΏЦˁᜃ᡼ᢇ҉

ᆢࡀЦญႄ຺ତ݁Ǎܴၺ᤮ତԤ᝻ܭ

ᤍ଍ܬǎ

11. ឱԷΏၺԉࠓ૊ࠁᄋᬅ࡜᝻ܭ֘

ᦢǎ

12. ឱԷΏၺԉࠓ

૊ࠁᄋᬥ᠏ᩚ

׭ᄋଏᢽ౷ߖ

ʽᝉ౷஄౷֘ಹ

ߖǎᔫΏၺଏᢽ

౐ୄᤃ᝻ܭឱญ

߸М஋Ꮇ᝻ܭ

ᥙГଏᢽ֘᝻

ܭϛωᏬԫǎ

13. ᥆󰩧ႄᭈᲟ󰩤ఱˁΏၺశ᝻ܭ௒

ឱફѤႄ຺ତ݁ǎ

14. ధ፦οڪᮍႁՍಬᄋ፦οցᤊ

ᛢǎ᝻ܭԫ૰௒ᭋᤊᛢ፦οΔݡႄ຺ጴ

ႄ຺ତ݁ԫ૰๰͵ุЛྮᗁЛ᝻ܭ

а᝻ܭᥔᭂ๹ԫ໾᝻ܭˁᑠ൥ࣣᤃͼ

ᜃ୒گǎ

15. శ᝻ܭᤍ଍ႄ຺௒ʸࠁ᜷ధ଍ڢ

εઑǎ

16. ᔫႄ຺ତ݁٩Ч

ᏺՍ٩ၺͼளႄᜊᎷ

ε᝾߳ܬᬥ௒Լ

ஶΨ୳ͼ࿅ঘǎ

17. శַᤡၺ๓

ફ2000ዜʿڢӞశ

ַᤡၺ᭥མࣝජό౏

ʿǎ

ࠬͶڃڛ൦ឮ௛˻ଣ҃ᄋМᦋ

ᦋଢᤙǍڐྠܧ௛Ꮼᤶᄋ૰݀

MUSIC Groupˁ᠈Ͷ᠋ǎ઀సԡஞ֘

ܲ᜻ᔫధటஉিˁԴᛢᤱᅽǎధᄋ

׹ಗڪ˟ЦՋᒮధᏩᄋ᠊ǎMIDAS,

KLARK TEKNIK, LAB GRUPPEN, LAKE, TANNOY,

TURBOSOUND, TC ELECTRONIC, TC HELICON,

BEHRINGER ֘BUGERA ௨MUSIC Group IP Ltd.

ОՄᄋ׹ಗญг׹ಗǎ© MUSIC Group IP

Ltd. 2017ྡీధǎ

ధУᮄˮᬸڅεοᄋᤡၺ౏൝ԤЦ߳ᄲУ

θ্ឱᄇᬇmusic-group.com/warrantyᎫቤಋ

ᄻߺ஠ᄋឡጻθ্ǎ

其他的重要信息

保修条款

法律声明

10 Quick Start Guide 11TCS Passive series

Amplier Considerations

The TCS series loudspeakers are optimised for use with the TURBOSOUND T series ampliers with the LMS series controllers. A full range of DSP settings to suit

any conguration are provided for download on the TURBOSOUND website. The use of third party amplication and processing is only advised using the matrix of

manual settings as well as the limiter calculator provided on the TURBOSOUND website. The TCS series loudspeaker enclosures should be driven by high quality power

ampliers designed for true professional use. Power ampliers should be capable of delivering long term broadband power equal to half the loudspeaker’s peak

power rating at its stated nominal impedance. The use of underpowered ampliers must be avoided as heavily clipped signals can cause permanent loudspeaker

damage. Limiters, crossovers and equalisation points must be set in accordance with the settings provided on the TURBOSOUND website. This will ensure the optimum

sound quality and long-term reliability as well as protection from damage.

Neutrik speakON* NL4 locking input connector(s) and 4-way barrier strip(s) are provided, allowing options for input and

link, passive, bi-amp, parallel and discrete operation.

Recommended Minimum Amplier Power

Model TCS62 TCS122 TCS152 TCS110B TCS212B TCS115B TCS218B

Mode Passive Passive Bi-amp LF Bi-amp LF Passive Bi-amp LF Bi-amp HF Passive Passive Passive Passive

Impedance 8 Ohms 8 Ohms 8 Ohms 6 Ohms 8 Ohms 8 Ohms 6 Ohms 8 Ohms 4 Ohms 8 Ohms 4 Ohms

Minimum

Amplier

Power

Continuous

RMS 175 W 600 W 600 W 75 W 600 W 600 W 75 W 300 W 800 W 500 W 1600 W

Peak 700 W 2400 W 2400 W 750 W 2400 W 2400 W 750 W 1200 W 3200 W 2000 W 6400 W

Connections

TCS62

Mode Back Panel Connector Internal Schematic

Passive Only

HPF HF

NL4

Input/

Link

1 -

Barrier

Strip

Input/

Link

LPF LF

speakON* NL4

Barrier Strip

PASSIVE, Input Full Range -

PASSIVE, Input Full Range +

1+ 1- 2+ 2-

Passive

Bi-Amp

HPF HF

NL4

Input/

Link

Barrier

Strip

Input/

Link

LPF LF

NL4

Input/

Link

Barrier

Strip

Input/

Link

speakON* NL4

Barrier Strip

PASSIVE, Input Full Range -

PASSIVE, Input Full Range +

1+ 1- 2+ 2-

speakON* NL4

Barrier Strip

1+ 1- 2+ 2-

BI-AMP, Input Low +

BI-AMP, Input Low -

BI-AMP, Input High +

BI-AMP, Input High -

Amplier Channel 1

Amplier Channel 2

Mode Back Panel Connector Internal Schematic

TCS122, TCS152

12 Quick Start Guide 13TCS Passive series

Mounting and Fixing

The table below summarises the rigging parts or kits required for various applications, and some examples of the possible rigging options are illustrated.

TCS series cabinets are designed with multiple internal rigging points to suit many possible mounting methods in permanent installations. All cabinets can be simply

suspended using optional M8 or M10 shoulder eyebolts coupled to the internal rigging points provided. Remove the appropriate countersunk screws and replace them

with eyebolts, which must have a thread length of at least 18mm. Use the rear rigging point to angle the cabinet for optimum room coverage. Cabinets may be hung

upside down if required. Turbosound WB-20, WB-55 and CB-55 wall and ceiling brackets are optionally available for TCS series cabinets, and these are also compatible

with OmniMount* wall and ceiling brackets which use 60 mm x 60 mm hole spacing.

Model Wall Ceiling Downll Array Kit Eyebolts

TCS62 WB-20

TCS62-SB

CB-55

TCS62-SB TCS62-SB M8 Thread

TCS122 WB-55 CB-55

TCS122-FP

TCS-FK1

TCS-FK2

EB-10-40

TCS152 WB-55 CB-55

TCS152-FP

TCS-FK1

TCS-FK2

EB-10-40

TCS115B TCS115-FP

TCS-FK3 EB-10-40

TCS Subwoofers EB-10-40

Some typical examples of the possible rigging options are shown here:

Passive

NL4

Input/

Link

Barrier

Strip

Input/

Link

speakON* NL4

Barrier Strip

PASSIVE, Input Full Range -

PASSIVE, Input Full Range +

1+ 1- 2+ 2-

Mode Back Panel Connector Internal Schematic

TCS110B, TCS212B, TCS115B

TCS218B

Parallel

Discrete

LF 1

NL4

Input/

Link

Barrier

Strip

Input/

Link

LF 2

LF 1

NL4

Input/

Link

Barrier

Strip

Input/

Link LF 2

speakON* NL4

Barrier Strip

Input SUB -

Input SUB +

1+ 1- 2+ 2-

speakON* NL4

Barrier Strip

1+ 1- 2+ 2-

Input SUB 1 +

Input SUB 1 -

Input SUB 2 +

Input SUB 2 -

Amplier Channel 1

Amplier Channel 2

14 Quick Start Guide 15TCS Passive series

TCS Series Flying Components

Wall and Ceiling Brackets

To install a loudspeaker using Turbosound wall and ceiling brackets, rst separate the brackets into their wall/ceiling plate and speaker plate component parts.

Remove the countersunk bolts on the rear panel of the cabinet. Attach the speaker plate to the cabinet with the bolts supplied. Fix the wall/ceiling plate in the venue

using appropriate xings (not supplied). Lift the loudspeaker on to the wall plate and re-assemble the bracket parts, adjust the vertical angle and tighten all bolts.

Downﬁll Applications

The TCS62 can be mounted underneath a TCS122 or TCS152 cabinet to provide downll coverage using

the TCS62-SB swivel bracket. First disassemble the swivel bracket into its component parts. Remove the

countersunk bolts from the bottom panel of the TCS152 cabinet and t the section with theelongated

holes using the xings supplied. Remove the countersunk bolts on the top panel and t the swivel bracket

using the supplied xings. Re-assemble the swivel bracket, angle as appropriate and tighten all xings.

To install the TCS62 in a ceiling-mount application, separate the component parts as above, and x the

top section to the ceiling with appropriate xings (not supplied). Fit the other half to the TCS62 cabinet,

re-assemble the bracket, angle as appropriate and tighten all xings.

Loudspeaker Arrays and Clusters

An array of two or more cabinets requires the use of kits of yplates and inter-cabinet couplers, which are xed to the cabinet sides through the M10 rigging points

and assembled together in a ‘daisy chain’ fashion to build up the required array. For all loudspeaker arrays consisting of two or more cabinets:

The number of inter cabinet coupler kits required = the number of boxes – 1, The number of yplate kits required = the number of boxes.

TCS62-SB

SWIVEL BRACKET

Illustrated here are the components parts available for TCS cabinets:

TCS122-FP (WH)

Fly Plate Kit for TCS122

TCS115-FP (WH)

Fly Plate Kit for TCS115B

TCS62-SB (WH)

Swivel bracket for TCS62

TCS152-FP (WH)

Fly Plate Kit for TCS152

2 x M8 Bolts

2 x M8 Spring Washers

2 x M8 Flat Washers

2 x M10 Bolts

2 x M10 Spring Washers

2 x M10 Flat Washers

4 x M10 Bolts

4 x M10 Spring Washers

4 x M10 Flat Washers

4 x M10 Bolts

4 x M10 Spring Washers

4 x M10 Flat Washers

4 x M10 Bolts

4 x M10 Spring Washers

4 x M10 Flat Washers

Contents:

1 x Bracket

Contents:

2 x Fly Plates

Contents:

2 x Fly Plates

TCS-FK3 (WH)

Inter-Cabinet Coupler Kit for TCS115B

TCS-FK2 (WH)

Inter-Cabinet Coupler Kit for TCS122 or TCS152

TCS-FK1 (WH)

Inter-Cabinet Coupler Kit for TCS122 or TCS152

2 x ICC

EB-10-40

Eyebolt M10 x 40mm

Contents:

2 x ICC

Contents:

2 x ICC

Contents:

1 x Eyebolt

16 Quick Start Guide 17TCS Passive series

Suspending with Eyebolts

TCS cabinets can be suspended using optional eyebolts coupled to the internal rigging points provided on the top, bottom and sides and back. The simplest method is

to use the two rigging points on the top and a single pull-back rigging point in the centre of the rear panel.

Remove the appropriate countersunk screws and replace them withshoulder eyebolts, which must have a thread length of at least 18 mm. Use the rear rigging point to

angle the cabinet for optimum room coverage. Cabinets may be hung upside down if required.

IMPORTANT NOTE FOR ALL INSTALLATION METHODS: The mounting of a permanently installed sound system may be dangerous unless undertaken by qualied

personnel with the required experience and certication to perform the necessary tasks. Walls, oors or ceilings must be capable of safely and securely supporting the

actual load. Themounting accessory used must be safely and securely xed both to the loudspeaker and to the wall, oor or ceiling.

When mounting rigging components on walls, oors or ceilings, ensure that all xings and fasteners used are of an appropriate size and load rating. Wall and ceiling

claddings, and the construction and composition of walls and ceilings, all need to be taken into account when determining whether a particular xing arrangement

can be safely employed for a particular load. Cavity plugs or other specialist xings, if required, must be of an appropriate type, and must be tted and used in

accordance with the maker’sinstructions.

The operation of your speaker cabinet as part of a own system, if installed incorrectly and improperly, canpotentially expose persons to serious health risks and

even death. In addition, please ensure that electrical, mechanical and acoustic considerations are discussed with qualied and certied (by local state or national

authorities) personnel prior to any installation or ying.

Make sure that speaker cabinets are set up and own by qualied and certied personnel only, usingdedicated equipment and original parts and components

delivered with the unit. If any parts or components are missing please contact your Dealer before attempting to set up the system.

Be sure to observe the local, state and other safety regulations applicable in your country. MUSIC Group, including the MUSIC Group companies listed on the enclosed

“Service Information Sheet”, assumes no liability for any damage or personal injury resulting from improper use, installation or operation of the product.

Regular checks must be conducted by qualied personnel to ensure that the system remains in a secure and stable condition. Make sure that, where the speaker is

own, the area underneath the speaker is free of human trac. Do not y the speaker in areas that can be entered or used by members of the public.

Speakers create a magnetic eld, even if not in operation. Therefore, please keep all materials that can be aected by such elds (discs, computers, monitors, etc)

at a safe distance. A safe distance is usually between 1 and 2 metres.

Rotating the HF horn pattern

The high frequency horn in all TCS122 and TCS152 models can be rotated through 90° in order to swap the horizontal and vertical dispersion patterns, particularly

useful when assembling clusters or for example to retain the original dispersion when the cabinet is installed in a horizontal orientation.

1. Place the cabinet on its back on a suitable work surface.

2. Remove the 10 posi-drive screws that hold the grille in place and set the grille aside (g 1).

3. Remove and disconnect the bass driver (g 2) to access the compression driver retaining brace, making a note of the bass driver polarity for later reconnection.

4. Reach in through the bass driver cavity and loosen the two wing nuts securing the compression driver retaining brace (g 3).

5. Remove the horn xing screws that secure the horn to the enclosure and lift out the horn and compression driver assembly (g 4).

(If required for servicing or replacement, disconnect the cables from the compression driver, making a note of the polarity for later reconnection.)

6. Rotate the horn to achieve the desired coverage pattern (g 5).

7. Re-assemble the cabinet and drivers by reversing steps 1-5.

8. If the compression driver cables have been disconnected, reconnect the cables while observing the correct polarity

(white cable to the +ve terminal, black cable to the –ve terminal).

9. Place the horn and compression driver back into the cabinet, making sure that the driver cables pass underneath the compression driver retainer and

that the compression driver ts squarely back into the retaining brace.

10. Tighten the wing nuts back onto the compression driver retaining brace (g 3).

11. Replace the horn xing screws and tighten to secure the horn back into the enclosure (g 4).

12. Reconnect the bass driver cables, observing the correct polarity (red cable to the +ve terminal, blue cable to the –ve terminal).

13. Check all components and conrm the horn orientation is correct (g 6).

14. Replace the grille (g 1) and phase check the cabinet before use.

BEFORE AFTER

Fig. 1

Fig. 4 Fig. 5 Fig. 6

Fig. 2 Fig. 3

18 Quick Start Guide 19TCS Passive series

Technical Specications

TCS62 (WH) TCS122/64 (WH) TCS122/94 (WH) TCS122/96 (WH) TCS152/64 (WH) TCS152/94 (WH) TCS152/96 (WH)

System

Frequency response 60 Hz - 20 kHz ±3 dB

50 Hz - 20 kHz -10 dB

50 Hz - 18 kHz ±3 dB

45 Hz - 20 kHz -10 dB

50 Hz - 18 kHz ±3 dB

45 Hz - 20 kHz -10 dB

50 Hz - 18 kHz ±3 dB

45 Hz - 20 kHz -10 dB

41 Hz - 18 kHz ±3 dB

35 Hz - 20 kHz -10 dB

41 Hz - 18 kHz ±3 dB

35 Hz - 20 kHz -10 dB

41 Hz - 18 kHz ±3 dB

35 Hz - 20 kHz -10 dB

Nominal dispersion 100° H x 60° V @ -6dB points, rotatable 60° H x 40° V @ -6 dB points, rotatable 90° H x 40° V @ -6 dB points, rotatable 90° H x 60° V @ -6 dB points, rotatable 60° H x 40° V @ -6 dB points, rotatable 90° H x 40° V @ -6 dB points, rotatable 90° H x 60° V @ -6 dB points, rotatable

Directivity factor (Q) 12.8 18.3 12.9 8.7 18.3 12.9 8.7

Directivity index (DI) 11.1 12.6 11.1 9.4 12.6 11.1 9.4

Power handling (IEC)

Passive 175 W continuous, 700 W peak 600 W continuous, 2400 W peak 600 W continuous, 2400 W peak 600 W continuous, 2400 W peak 600 W continuous, 2400 W peak 600 W continuous, 2400 W peak 600 W continuous, 2400 W peak

Bi-amp – LF: 600 W Continuous, 2400 W peak

HF: 75 W continuous, 300 W peak

LF: 600 W Continuous, 2400 W peak

HF: 75 W continuous, 300 W peak

LF: 600 W Continuous, 2400 W peak

HF: 75 W continuous, 300 W peak

LF: 600 W Continuous, 2400 W peak

HF: 75 W continuous, 300 W peak

LF: 600 W Continuous, 2400 W peak

HF: 75 W continuous, 300 W peak

LF: 600 W Continuous, 2400 W peak

HF: 75 W continuous, 300 W peak

Sensitivity 90 dB (1 W @ 1 m) 96 dB (1 W @ 1 m) 96 dB (1 W @ 1 m) 96 dB (1 W @ 1 m) 97 dB (1 W @ 1 m) 97 dB (1 W @ 1 m) 97 dB (1 W @ 1 m)

Maximum SPL

Passive 112.5 dB continuous, 118.5 dB peak 124 dB continuous, 130 dB peak 124 dB Continuous, 130 dB Peak 124 dB Continuous, 130 dB Peak 125 dB Continuous, 131 dB Peak 125 dB Continuous, 131 dB Peak 125 dB Continuous, 131 dB Peak

Bi-amp – LF: 124 dB continuous, 130 dB peak

HF: 128 dB continuous, 134 dB peak

LF: 124 dB Continuous, 130 dB Peak

HF: 128 dB Continuous, 134 dB Peak

LF: 124 dB Continuous, 130 dB Peak

HF: 128 dB Continuous, 134 dB Peak

LF: 125 dB Continuous, 131 dB Peak

HF: 128 dB Continuous, 134 dB Peak

LF: 125 dB Continuous, 131 dB Peak

HF: 128 dB Continuous, 134 dB Peak

LF: 125 dB Continuous, 131 dB Peak

HF: 128 dB Continuous, 134 dB Peak

Impedance

Passive 8  8  8  8  8  8  8 

Bi-amp – LF: 8 

HF: 6 

LF: 8 

HF: 6 

LF: 8 

HF: 6 

LF: 8 

HF: 6 

LF: 8 

HF: 6 

LF: 8 

HF: 6 

Crossover type Passive Passive / Bi-amp, switchable Passive / Bi-amp, switchable Passive / Bi-amp, switchable Passive / Bi-amp, switchable Passive / Bi-amp, switchable Passive / Bi-amp, switchable

Components

1 x 6" (162 mm) LF driver

1 x 1" (25 mm)

HF compression driver

1 x 12" (312 mm) LF driver

1 x 1.4" (36 mm)

HF compression driver

1 x 12" (312 mm) LF driver

1 x 1.4" (36 mm)

HF compression driver

1 x 12" (312 mm) LF driver

1 x 1.4" (36 mm)

HF compression driver

1 x 15" (394 mm) LF driver

1 x 1.4" (36 mm)

HF compression driver

1 x 15" (394 mm) LF driver

1 x 1.4" (36 mm)

HF compression driver

1 x 15" (394 mm) LF driver

1 x 1.4" (36 mm)

HF compression driver

Enclosure

Connectors 1 x Neutrik speakON* NL4,

1 x barrier strip terminals

1 x Neutrik speakON* NL4,

1 x barrier strip terminals

1 x Neutrik speakON* NL4,

1 x barrier strip terminals

1 x Neutrik speakON* NL4,

1 x barrier strip terminals

1 x Neutrik speakON* NL4,

1 x barrier strip terminals

1 x Neutrik speakON* NL4,

1 x barrier strip terminals

1 x Neutrik speakON* NL4,

1 x barrier strip terminals

Wiring

Passive Pins 1+ / 1- input, pins 2+ / 2- link Pins 1+ / 1- input, pins 2+ / 2- link Pins 1+ / 1- input, pins 2+ / 2- link Pins 1+ / 1- input, pins 2+ / 2- link Pins 1+ / 1- input, pins 2+ / 2- link Pins 1+ / 1- input, pins 2+ / 2- link Pins 1+ / 1- input, pins 2+ / 2- link

Bi-amp – Pins 1+ / 1- LF, pins 2+ / 2- HF Pins 1+ / 1- LF, pins 2+ / 2- HF Pins 1+ / 1- LF, pins 2+ / 2- HF Pins 1+ / 1- LF, pins 2+ / 2- HF Pins 1+ / 1- LF, pins 2+ / 2- HF Pins 1+ / 1- LF, pins 2+ / 2- HF

Dimensions (HWD) 224 x 402 x 198 mm

(8.8 x 15.8 x 7.8")

834 x 399 x 425 mm

(32.8 x 15.7 x 16.7")

834 x 399 x 425 mm

(32.8 x 15.7 x 16.7")

834 x 399 x 425 mm

(32.8 x 15.7 x 16.7")

834 x 473 x 451 mm

(32.8 x 18.6 x 17.8")

834 x 473 x 451 mm

(32.8 x 18.6 x 17.8")

834 x 473 x 451 mm

(32.8 x 18.6 x 17.8")

Net weight 6.9 kg (15.2 lbs) 26.5 kg (58.4 lbs) 26.5 kg (58.4 lbs) 26.5 kg (58.4 lbs) 28.9 kg (63.7 lbs) 28.9 kg (63.7 lbs) 28.9 kg (63.7 lbs)

Construction 12 mm (½") birch plywood 15 mm (⁄") birch plywood 15 mm (⁄") birch plywood 15 mm (⁄") birch plywood 15 mm (⁄") birch plywood 15 mm (⁄") birch plywood 15 mm (⁄") birch plywood

Finish Semi-matte black paint

(white optional)

Semi-matte black paint

(white optional)

Semi-matte black paint

(white optional)

Semi-matte black paint

(white optional)

Semi-matte black paint

(white optional)

Semi-matte black paint

(white optional)

Semi-matte black paint

(white optional)

Grille Powder-coated perforated steel Powder-coated perforated steel Powder-coated perforated steel Powder-coated perforated steel Powder-coated perforated steel Powder-coated perforated steel Powder-coated perforated steel

Flying hardware M8 X 8, M6 X 2 Points M10 x 9, M8 X 8 Points M10 x 9, M8 X 8 Points M10 x 9, M8 X 8 Points M10 x 9, M8 X 8 Points M10 x 9, M8 X 8 Points M10 x 9, M8 X 8 Points

Accessories

TCS62-SB (WH)

Swivel Bracket for TCS62

TCS122-FP (WH)



y plate kit for TCS122