Turtle Beach Ear Force Stealth 450 User manual

SURROUND SOUND DRIVER INSTALLATION GUIDE

2
SETUP
STEP.1
Insert Stealth 450 Transmitter into your PC and allow windows automatic installation to occur.
This may take a couple minutes.
STEP.3
Run the Installer and accept the user agreement
STEP.2
Download the installation tool from the Stealth 450 product page at:
http://www.turtlebeach.com/Stealth450

3
SETUP
STEP.4
Select Turtle Beach Stealth 450 if prompted
STEP.5
After the installation completes make sure to restart
your PC
STEP.6
Right-Click the Speaker Icon in the bottom right corner of your taskbar

4
SETUP
Right-Click Turtle Beach Ear Force Stealth 450
and Set as Default Device
Select Configure and set to 7.1 Surround
Step.7
Right click the Stealth 450 device and select Properties

5
SETUP
Select the Turtle Beach Audio Settings tab; From here you can configure your advanced audio settings.
On the Turtle Beach Audio Settings Tab multiple DTS Headphone:X
7.1 Surround Sound Modes are available to select from. Each mode
provides an unique sonic environment:
Game Mode
Movie Mode
Music Mode
Stereo Mode
To bypass DTS Headphone:X, select Surround Off.
Superhuman Hearing
Here you can manually engage Superhuman Hearing or set a Hot-
key so it can be conveniently engaged mid-game while you are away
from the Turtle Beach Audio Settings Menu.
Use Superhuman Hearing™ Mode in combi-
nation with DTS Headphone:X 7.1 Surround
Sound to pinpoint quiet audio cues like
enemy footsteps and weapon reloads.