Turtle Beach Amigo II User manual

For more products, accessories, and our support
knowledge base, visit TurtleBeach.com
For warranty information please
visit www.turtlebeach.com/support
Information To User:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part  of FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures: (.) Reorient or relocate the receiving
antenna. (.) Increase the separation between the equipment and
receiver. (.) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (.) Consult the
dealer or an experienced radio TV technician for help.
®
USB Sound Card & Headset Adapter
User’s Guide
Copyright © 2010, Voyetra Turtle Beach, Inc. (VTB). All rights reserved. No part
of this document may be reproduced without permission. Turtle Beach, the Turtle
Beach logo and Audio Advantage are registered trademarks of VTB. Inc.
Windows and Vista are registered trademarks of Microsoft Corporation. Mac is a
registered trademark of Apple, Inc. All other trademarks are properties of their
respective companies and are hereby acknowledged. Product features, visual
design, package contents and specifications are subject to change without
notice. Made in China. Product# TBS-1155-01 V1
PRODUCT NAME:
Turtle Beach Audio Advantage Amigo II
MODEL NUMBER:
TBS-- V
FCC RULES:
TESTED TO COMPLY WITH FCC PART , CLASS B
OPERATING ENVIRONMENT
FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part  of the FCC rules. Operation is subject
to the following conditions. () This device may not cause harmful
interference and () This device must accept any interference received
including interference that may cause undesired operation.
CAUTION:
Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.
PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE:
Voyetra Turtle Beach, Inc.
 Clearbrook Road, Suite , Elmsford, NY 
Tel: () - Fax: () -
RoHS
COMPLIANT
FCC Declaration of Conformity

Using the Amigo II
with Windows �& Vista®
After the Amigo II has been detected, you can
check if it has been set up as a USB audio device by
clicking Start > Control Panel > Sounds and Audio
Devices.
Then click on the Audio tab and click on the drop
down menu in the Sound Playback section to see if
Turtle Beach USB Audio is listed.
To use the Amigo II as your default audio device,
select it from the list and then click “OK”.
[Windows �specific instructions are in italics]
After the Amigo II has been detected, you can check
if it has been set up as a USB audio device by
clicking Start (circular Windows logo) > Control
Panel > [Win �:Hardware and Sound] > Sound.
In the Playback tab, the Amigo II should appear in
the list as Speakers: Turtle Beach USB Audio.
To use the Amigo II as your default audio device,
right-click on Turtle Beach USB Audio and select
“Set as Default Device”. A green circle with a check
mark will appear to indicate that this is now your
default sound device.
Using the Amigo II
with Windows®XP
After the Amigo II has been detected, you can check
if it has been set up as a USB audio device by
clicking on the Apple menu icon and go to System
Preferences > Sound.
Select the Output tab and you should see Turtle
Beach USB Audio listed.
Using the Amigo II
on a Mac®
The Amigo II can be used to turn a standard headset
into a USB headset.
Insert the headset’s mic jack (sometimes colored
pink) into the pink Mic Input and the line jack
(sometimes colored green) into the green
Headphone Output.
Using the Amigo II
with a Headset
Setup Instructions
To use the Audio Advantage Amigo II with a
Windows®PC/laptop or Mac®, simply plug it into a
USB socket and the LED on the unit should light up,
indicating that it’s powered. The Windows or Mac
operating system will automatically detect the
device and inform you when it’s ready to use.
The .mm stereo analog output jack can be used to
connect headphones and powered speakers. Once
the Amigo II is set up as described below, you can use
headphones or speakers by plugging them into the jack.
You can connect an external microphone to the Mic
Input jack. For instance, if you’re using a headset that
has a microphone, you can connect the microphone
from the headset to Amigo II’s mic input.
If your PC or laptop has more than one USB socket, you
should always try to use the same socket for plugging
in the Amigo II. This will assure that it will always be
recognized as the same device by the operating system.
PLEASE NOTE: Some USB hubs may have problems
providing a consistent data stream for digital audio and
may cause data stream packet loss. This could result in
clicks or distortions on the USB audio from the Amigo II.
If you experience this problem when the Amigo II is
connected to your USB hub, do not use the hub and
instead connect the Amigo II directly to the USB
port on your Mac or PC/laptop.
Headphone
input
(green)
Microphone
input
(pink)