TUTK CLJ 100L User manual

1

2
Index
1. Read Before Use. ................................................................................................... 3
2. Quick Installation Guide ..................................................................................... 5
3. Set up the Camera ................................................................................................ 6
4. Connect to the network ...................................................................................... 7
5. Software ................................................................................................................... 9
5.1 IPCAM system ........................................................................................... 9
5.1.1 How to install ................................................................................ 9
5.1.2 How to use IPCAM SYSTEM .................................................... 11
5.1.3 Take Picture .................................................................................. 13
5.1.4 Detect ............................................................................................ 13
5.1.5 Playback ........................................................................................ 14
5.1.6 System setting ............................................................................ 17
5.2 Search Tool V3 ......................................................................................... 25
5.2.1 How to use Search Tool V3 ..................................................... 25
5.2.2 Connect the Cam and computer........................................... 28
5.3 3G Mobile Viewer ................................................................................... 30
6. Specification ......................................................................................................... 33
7. Introduce the PLC and P2P .............................................................................. 34
8. Trouble shooting ................................................................................................. 35

3
(
G
)
Software CD…………
.
………
.
……
..
……x
1
(
A
)
CLJ
100
L Lamp Type IP Cam………x
1
(B)Base……………………………….……………x
1
(
C
)
Cable Line…… …………
.
……
..
…………x
1
(
D
)
PLC
200
Adaptor
.
………………
...
……
..
x
1
(
E
)
Power cord……
..
………
..
…………
..
……x
1
(
F
)
User
'
s Manual
..
…………
.
…………
..
……x
1
Package
Content
1. Read Before Use.
Thank you
Thank you for purchasing this product. We strongly suggest you read this
manual carefully before you set up the product. Some software image
may be different from your real setting process, please follow the software
instruction which show on your pc device. If you need further product
information, you can get on our official website or contact our service
people by e-mail.
Confirm
Please make sure that there are 7 items in your box.

4
Attention
 Surge Protection Device Issue
We suggest that connect the PLC adaptor and IP Cam into home
power outlet directly. If you need to use the extension cord please
avoid using the cord with surge protection device (SPD). Some SPD
may cause the disconnection of signal.
 Three-phase power system
Generally speaking, the three-phase power system is used by the
industry environment. It is rare for home use. But if you are using the
product at the three-phase power system environment. Please make
sure that the PLC adaptor and the IP Cam must be connected at the
same power phase, otherwise it may cause the disconnection of
signal.
 Voltage Issue
our products support AC 100V~240V. But all devices must be
connected at the same voltage environment; otherwise it may cause
the disconnection of signal. For example: if PLC plug into the outlet of
110V but the IP cam plug into the outlet of 220V, then there will be
no signal connection due to the different voltage.
 Quantity Issue
One PLC adaptor does not support more than 16 IP cameras. It does
not allow setting up two PLC adaptors in one network in case the
mistake of network connection.
 Distance/Power meter/Power-off Protection
All devices must be under the same power meter, or it may cause the
disconnection of signal. The entire device has the connection
distance limited of 300M. However, the Power-off Protection does
not affect any signal communication as result there is no worry issue
of Power-off Protection.
Liability
Every care has been taken in the preparation of this manual. Please inform
your local TUTK office of any inaccuracies or omissions. Throughtek (TUTK)
cannot be held responsible for any technical or typographical errors and
reserves the right to make changes to the product and manuals without
prior notice. Throughtek (TUTK) makes no warranty of any kind with
regard to the material contained within this document, including, but not
limited to, the implied warranties of merchantability and fitness for a
particular purpose. Throughtek (TUTK) shall not be liable nor responsible
for incidental or consequential damages in connection with the furnishing,
performance or use of this material.

5
2. Quick Installation Guide
 Step 1: Screw the product into the lamp socket or
the attached base.
 Step 2 : Plug in the power source.(AC 100V~240V)
 Step 3 : PLC plug in the power source, connect PLC
to your broadband router via cable line
 Step 4: Install the software.(Refer ch.5)
 Step 5: Wait for the auto search and get video
image from your IP camera.

6
3. Set up the Camera
1To plug the camera into E27socket. The lens angle can be adjusted.
2Also you can use the base to connect the camera.
3The base can be opened from the side hole and fixed on the roof.
4 Plug in the PLC to power socket. Make a connection to broadband
router with RJ45 cable line.

7
4. Connect to the network
We need broadband router or wireless AP with DHCP
function to connect the network.
There are 3 connection modes to set up the network.
1 You want to get the video from the remote side via internet, please
connect your PLC to the broadband router or wireless AP and get on
internet with ADSL modern.
2 You want to have the video under the LAN, just connect the PLC to the
broadband router /wireless AP without link to the internet.
There is no more setting require after you finish the
connection of 1 or 2. Then please install the software
IP CAM SYSTEM, it will scan and get the camera
image to your receiver device (PC/NB) automatically.

8
3 Simply make the connection between the Camera and computer.
We suggest you skip this part if you do not adapt this way.
If you need to set up your network by this mode, please refer Ch.5.2.2.
4 This connection mode is unworkable. (There is no broadband
router/wireless AP under the network)

9
5. Software
5.1 IPCAM system
5.1.1 How to install
Insert the software CD to your CD-R device and double click the IPCAM
system.exe to start the install.
1 You will have the below page: please click “Next”.
Selected “English”
2 Change the destination location, please clicks”Next “if you do not
want to change..

10
3 Click “Install”
4 Please wait for the installation process.
5 Install completed, please click” Finish “to start the software.

11
5.1.2 How to use IPCAM SYSTEM
1 Status: To show the information of cameras.
2 Operating Bar: Basic operation.
3 Setting BAR: For the system and camera setting.
4 Full screen BAR: Double click the bar to have the full screen.
(Click ESC to escape full screen)
Attention: Under this mode you can only have the screen of16 channels.
Status Bar:
1 Digital: The camera channel number.
2 Green: no recording Red: Detecting & recording
Detection: The function of recording is off.
3 Camera via LAN Camera via P2P server
4.Full screen BAR
1. Status
3. Setting
2. Operating

12
Operating BAR
1 Search: Research the connection of cameras.
2 IP CAM Set up: Search Tool V3(Refer 5.2 Search Tool V3).
3 Snapshot Folder: To open the snapshot folder.
4 Display size: To change the video size. (For single view only)
5 Single View: To see the single channel, you can change to next
channel by clicking again.
6 4 channel View: To see the 4 channels, you can change to next 4
channels by clicking again.
7 16channels view: To see the 16 channels.
Tips: Under the 16 channels mode, you can select a channel and click
right once to change into the single view.
Introduction the Setting BAR

13
5.1.3 Take Picture
You can take video pictures by clicking this icon.
You can click the “open snapshot folder” to check the picture.
Notice: This function is for the single view mode only.
5.1.4 Detect
You can start the recording function by clicking this icon.
When you start the recording function, the detecting information will
show on the operating bar.
Attention!! All the cameras will start to record when you click the detect
icon, if you want to record the selected channels, please set up the record
function by channels. You can set up at the following path:
Camera Set up>>Selected Camera>>Recording>>Mode>>Non-Record

14
To turn off the recording function please refers to the below picture:
The Detection logo will occur on the status bar if the non-record is
selected..
Green: no recording
Red: Detecting & recording
Detection: The function of recording is off.
5.1.5 Playback
You can watch the recorded video file by clicking this icon.

15
How to use:
1 Select the date.
2 Select the camera channel.
3 Click “Query” to have the recording file.
4Select the file and play it.
The playback Bar:
1 Play/Pause
2 Rewind /Forward
3 Playing Speed
4 Snapshot for playback
5 Open the snapshot folder.
1 2 3 4 5

16
Start Intelligent Search
This function can help you to detect the event during the playback:
1 Select “Start Intelligent Search”
2 Clicks “Setup Search”
3 Add new block at video part where you want to be detected.
4 You can adjust the sensitivity.
5 Click “Setup finish”
6 Start “Search”
When the system detects the event, the screen will pop out:
1 Search an event! Do you want to snapshot?
2 Events found! Do you want to interrupt search?

17
5.1.6 System setting
User- Interface setting: English/Chinese(gb)/Traditional Chinese.
Mail Server
This is for the mail alert mode; please fill in the following information to
start the mail alert if you need it.

18
Working when system starts up
There are two options, detecting and check update. The web server is
for advanced model use.
Circle Record
During the recording, you can decide how many percentage of hard disc
space you will use for recording purpose.
Record
You can change the save folder for the recording file and snapshot file.

19
Camera setting
Video Source
Generally speaking, this product will catch up the video from your
IPCAM automatically. You do not need to do anything about the video
source. The function here is open for the user who wants to choose
their video source by manual.
You can choose the source by selecting the up and down arrow.
1 Video source from LAN:
Fill in the account and password.
For security issue, we strongly suggest you
Set up the account and password.
Please refer Ch5.2 Search Tool to set up.
2 Video source from P2P:
Fill in the account and password.
Then you must fill in your Device IP
and Device password. Our P2P server
will help to give connection between
your camera and computer by these
information. That is why you do not need
to do any IP configuration.
3 No video source.
To turn off the video source.
Attention!!The P2P device ID/Password was printed on the product
body. Every product has its own ID and password. If you lost the
information, Please check the software “5.2 Search Tool” to have it
1
2
3

20
Basic Settings
Channel: You can assign the name and note to camera.
Channel Information:
To select the information which show on the video.
Channel number/Channel Name/Date /Time/Week/Font size/Fore
color/background/water mark.
Adjust the image
You can adjust the image by using the following option.
Flip horizontal/Flip vertical/Rotate