TUYA CA32APDB09 Technical manual

OPERATION INSTRUCTION
AHDVideoIntercomSystem
IndoorMonitor
UserManual
Statement
If there is any doubt or disputable regarding information in this manual, you can call
our company for clarification.
There maybe some difference between the description provided here and the actual
devices, as our products are constantly developing and upgrading. We apologize if
this manual does not contain all of the latest updates. Thanks
86706-MC-0310 V1.0

INDOOR MONITOR SPECIFICATION
Note: The following are diagrams of all of the available indoor unit models, not all
models have the same layout or features, please take actual model as quasi.
1 2
CONTENTS
PAGE
Indoormonitorspecification
Installationnote
CallTransfertootherextension
MenuOperations
InstallTheIndoorUnit
Accessories
WiringDiagram
OperationIntroduction
Monitoring
MotionDetection
Internalcommunicationamongindoorunits
AlarmInstructions
1. 2
2. 5
3. 5
4. 6
7
7.
8.
9.
5.
6. 8
8
9
10.
10
11.
12.
21
21
22
1
4
7
2
5
8
3
6
9
10
11
12
13
NO.
LED1
LED2
LED3
TFTdisplay
Microphone
Increasevolume
Decreasevolume
Soundfromoutdoorcamera
Decreasetheringervolumeoftheindoordeviceordecreasevolumefor
theindoordeviceduringintercom.
IncreasetheringervolumeoftheindoordeviceorIncreasevolumefor
theindoordeviceduringintercom.
Name
PowerLED
Door1LED
Door2LED
Menubuttonandconfirmbutton
Startmanualredordorstopmanualrecord.
Humanbodysensortouchbuttons
Viewvisitor’simagedisplayedontheTFTscreen
Transmitthevoicetooutdoorcamera
ForthemodelswithSDcard,InserttheSDcardforrecording
Tocaptureaframeofthevideostreamasastillphoto.
Descriptions
Operationbutton
Speaker
Settingsbutton
Snapshot
SDcardslot
Record

3 4
AC/DCpoweradapter
forcamera(notincluded)
AC/DCpower
adapter
forunlocking
(notincluded)
AC/DC
electriclock
(notincluded)
AC/DCpower
adapter
forunlocking
(notincluded)
AC/DC
electriclock
(notincluded)
AC/DCpoweradapter
forcamera(notincluded) Externalswitchingpowersupply
(AC100V-240V)--optional
DESCRIPTION ON SYMBOL
Internalcall,transfercallandcolorcoordination
1.Onstandbymodelongtimepress callslavemonitordointernalcall.
2.Duringoutdoorstationtalkwithindoormonitor,longtimepressdo
transfercall.
3.Duringtalkingormonitoring,press dispalyshowcolorcoordination:
volume,brightness,contrast,saturability,refresh,returnback(volume
adjustforoutdoorstationandindoormonitortalkingsounds;Refresh:
whenmixconnectPAL/NTSCcctvcameraoroutdoorstationand
CVBS/AHDcctvcameraorourdoorstation;duringkeeppoweronand
dosomeconnectionchangeforcctvcameraoroutdoorstation,ifno
imagecomein,pleasepress"R"refreshsignal.

Monitoringoutdoorstationimage
Receivedvisitorcallandtalking,duringmonitoringpresscan
talkwithoutdoorstation.
Increasingbutton Movetonextitem.Ifuseitforadjustthevolume,scrollupisforincrease
thevalue.
Movetonextitem.Ifuseitforadjustthevolume,scrolldownisfor
decreasethevalue.
idlerwheelmoveup
idlerwheelmovedown
Compositekeys(mainmenu+confirm)
1.Instandbymode,pressentermainmenu.
2.Onmainmenu,pressmeansconfirm.
3.Ontalkingormonitoringmode,ifsetasrecording,pressstop
record,pressagainstartnewrecord;ifsetassnapshot,press
snapshotonepicture.
4.Duringplaymusics,videosandpictures,presspause,press
againiscontinute.Playmusicsorvideos,keeplongtimepress
displayvolumebar
Decreasingbutton
Settingbutton
Transferbutton
Monitoring
Talkbutton
Unlockbutton
Hangupbutton
Backbutton
Volumebutton
Presscanbacktothepreviouspage
Openthedoor
Talkingvolumesetting
idlerwheelmoveupmeans”+”.idlerwheelmovedownmeans”-”.
Endoftalk

5 6
OPERATION INTRODUCTION
VISITOR CALL
Standby mode
The visitor press
the call button on
outdoor camera 1
The visitor press
the call button on
outdoor camera 2
Outdoor station and
Indoor monitor can
hear the ring tone,
default ring tone time
30s. NOTICE:
Ifpresscallbuttonfromtwooutdoorunitsatthesametime,
thefirstoutdoorunitwillring,anotheronenoresponse,
unlesscommunicationbacktostandbyinterfacethenpress
callbuttonagain.
Notice:Pressbackbuttontotuneoutthecoloroptionin
communication,pressortomovecursorselect
“volume”press,thenpressbuttonincreasethe
volume,pressbuttontodecreasethevolume.
Ifnooneathomeornooneanswer,outdoorunitwill
prompts“Pleaseleaveamessage”,itwillhave60s
messagetime,andbacktostandbymodeafter60s.
Unlockthelockwheninacall,pressunlockbutton
tounlockthedoor,ringtonestop.
Boththevisitor’svoiceandimagewillbenotswitchedoffwithin20softimespanwhenthe
unlockbuttonispressed,thisindividualizedfunctionallowyoutomakesurewhetherthe
visitoralreadycomein.
ForthemodelswithSDcard,whenthedoorbellrecordforthevideomode:Fromthestart
ofacall,thewholeprocesswillberecording.Iftheuserpressthebutton,therecording
willbestoppedmanually.
ForthemodelswithSDcard,whenthedoorbellrecordforthesnapshotmode:Thewhole
processwillbecapture,usercanpressthebuttontocaptureanimage.
Wheninacall:themachinecanlistentothesoundoftheoutdoormachine,youcanpress
thebuttontoconversationandpressthebuttontounlock.
Wheninacall,can’tpressmonitortoswitchover.
Wheninacall,ifanotheroutdoorunitcallorstartalarm,indoorunitwillhavetextorsound
“du..du..du..”prompt.
The visitor’s image
automatically displayed on
the screen
NOTICE:
End
release the
door lock
The conversation
duration is 120s
at a time
Start conversation
with outdoor camera
Stop ringing
Press the talking
button on indoor
monitor
Press the unlock
button on indoor
monitor
Press the hang up button
on indoor monitor
INSTALLATION NOTE
Theelectriclock/alarm/cameraisnotincludedinthepackage,youcanpurchaseanelectriclock
whichissuitableforactualrequirement.
InthestandarddeliverythesystemsupportslockswithNormallyOpen(N.O.)doorunlocking
method.Itmeansthatinthenormalstatethedrycontactisopenedsothelockiskeptunder
constantclosed state.Iftheunlockingpush-buttonispressedandthedrycontactischanged
toclosed,thenthelockisreleased.

Indoormachinepowerwithabuilt-inpoweroranexternalpoweroptional.Pleaserefertoactual
controlusing.Iftheindoormachinewithabuilt-inpowersource,applicabletowidevoltagerange
(AC100V-240V).PleasefirstpullouttheACpowerplugbeforeinstallationofdevice(shownas
below).

Useandselectionofwire,pleaserefertothefollowing.(Theactualeffectandthequalityofwire
rodhastheverybigrelations)

1.4C ordinary unshielded and shielded wire connection mode:

2.3Cordinaryunshielded+videowire(75-3)connectionmode:
3.CAT5networkcableconnectionmode:(Notrecommeded)
Unshieldednetworkcable(≤50m)
(≤100m)
Distance≤28m(4*0.2mm²); Distance≤50m(4*0.3mm²); Distance≤80m(4*0.5mm²)

WIRING DIAGRAW
4C4C 4 C
4C
4C
4C
4C
CAM 1
Ala rm
Ala rm
CAM 2

7 8
23456
23456
CALL TRANSFER TO OTHER EXTENSION
INTERNAL COMMUNICATION AMONG INDOOR UNITS
Internalcommunicationfunctionrequiresatleasttwoindoorandoneoutdoorunitstobe
connected.
Outdoorcameracallindoormonitorand
conversationisunderway
Thecalledslavemonitor
willgetringtone
Keeppressing
theTransferCall
button
Selectaextension
whichyouwant
Thecalledslavemonitor
willgetringtone
Startconversation
amongindoorunits PressHang
upbutton End
Atleast2indoorunitsisrequired.
keeppressing
transfercall
buttontoactivatethefunctionofcalltransfer
totheextensionwhichyouchoose
Pressthetalking
buttononcalledof
indoorunits
Standby mode
Pressthetalking
buttononcalledof
indoorunits
NOTICE:
NOTICE:
Pressthebuttonorupwardor
downwardtoselecttheextension,then
presstoconfirm.
Notice:Pressbackbuttontotuneoutthe
coloroption,pressorbuttonto
movecursor,select“volume”press
thenpressincreasevolume,press
todecreasevolume.
Pressthebuttonorupwardor
downwardtoselecttheextension,then
presstoconfirm.
Notice:Intercomcan’ttuneoutcoloroption,
can’tadjustcommunicationvolume.
MONITORING
Standby mode
Optioninthesettingsinthemenu:DOOR1,CAM1,DOOR2,CAM2operatingmode(openorclosed)
Ifyouareusingonlyoneoutdoorcamerainmonitoringmode,youcanalsoendthemonitoring
modebypressingthemonitoringbuttonagain(MustbeCloseCAM1DOOR2;CAM2inthe
menuoption).
Ifyouusetwoindoorunits,youcanalsosimultaneouslyinotherindoorunitstartsmonitoring
mode,thesameimagesaredisplayedonthescreenofthedifferentindoorunit.
Whenintercominmonitormode,ifoutdoorstationcall,themonitorwillendupcommunication
orswitchtocallimage.
WithSDcard,ifrecordmodeisvideo,pressfirsttimesettingbuttonstarttorecordavideo,
presssettingbuttonagainwillstoprecording.Ifrecordmodeissnapshot,pressnextsetting
buttonwillsnapshotapicture,andwillsnapshotmorepictures.
NOTICE:

9 10
Instandbymode,pressthebuttontoaccessthemainmenuinterface,showsthemain
interfaceasshownbelow.Onmenus,pressorupwardordownwardtomovethecursor
totheoptionyouwant,andthenpressbacktopreviousstep.
MENU OPERATIONS
Theclockisdisplayedinthemonitorwithstandbystatebydefault.Ifthedigitalphotoframe
functionison,theimagesavedintheSDcardwillbeautomaticallyplayedinstandbystate.
Iftheuserdidnotdoanyoperation.systemwillbebacktostandbymodeafter60s(exceptplaying
music,video,picture).Clockkeepdisplay60sonstandbymode,afterenterblackscreenprotection.
Pressthebuttonorupwardordownwardtomovethecursortotheoption“System”,then
presstoenterthe“System”menu.Systemsetupincludes:“Lanugage”,“Time”,“Information”,
“Ring”,“Volume”,and“networksetting”.
1.Set System Parameters
There are two ways to display in the standby status
Time&Datestandbymode Digitalphotoframestandbymode
10:50
Monday
07-08-2017
SDcardmusthavenamewith“ring”and“user”twofolders,themusicmustsaveinring
folder,systemcanfindit,identifyitandsetitasdefiniteringtone.Picturesmustsave
inphotofolderof“user”,canbefoundandshow,videosavedin“user”filecanbefound
andshow.
MOTION DETECTION
2.Pressthebuttondownwardtomovethecursortotheoption“MotionDetection”,themotion
detectionhas4CHforchoose:Door1,Door2,CAM1,CAM2;butyoucanonlychooseoneoption
whenworking.
3.Onstandbymode,whendetectmotionstarttorecordingorsnapshot.
1.Onstandbymode,presstoenterintothemainmenuasthefollowingpicture.Itincludes
system,time,digitalphoto,mode,meida,record.Presortomovethecursorandreturn
buttontobacktothestandbymode.

11 12
Note: The product only supports the SD cards that are written at a speed
of more than 10MB/s with a memory of less than 32G.
Note: The system upgrade can be upgraded using the SD card, and the system
upgrade is illustraded in the media menu.
[Reboot]:
[Update]:
[Format SD card]:
[Door1]:
[Door2]:
[Mode]:
[Return]:
Movethecursorto“”andpress.Itwillpop-upawindow,choose“Yes”
torestartthemachine,choose“No”tocancel.
UserscanupgradethefirmwareofthedeviceviaSDcard.
MovethecursortoFormatSDandselect“”.Press,thepop-up
windowwillremindifformatSDcardisneeded.Select“Yes”toforwardand“No”
tocancel.Iftheformatcardisfinished,therewillbenotificationof“formatSD
cardsuccessfully”
Twotypemode:DefaultorCustombell(Notice:CustombellselectfromSDcard).
Twotypesofringtone:DefaultorCustombell.DefaultRingtone:Built-inringtonefrom
systemCustombell:DownloadmusicsaveonSDcardandselectitasringtone.
Exitthecurrentmenu.
Onsystemmenu,movethecursortotheoption“Ring”,thenpresstoenterthe“Ring”menu,
setupthedoorbelltoneoftheoutdoorcamera.
2. Ring select
Setupfilefoldernameas“Ring”fromSDcard,keepallmusicunder“Ring”folder,afteritcan
befoundandselectascustomsbell.
Musicnameshouldcreatasring_1~ring_12.
Twotypemode:DefaultorCustombell(Notice:CustombellselectfromSDcard).
Inthesystemmenu,movethecursorto“Clock”andpresstoenterthe“clock”menu.Theclock
switchcontrolswhethertheclockisdisplayedinthestandbymode,theonistheopendisplay,and
theoffisclosed.Mobilecursorto“clock”,presstoturnofftheclock,andthenwillnotdisplay
theclockwhenstandbymodeisclosed.Thescreenisallblack,andthedigitalphotoframewillnot
beopened,norwillthepicturebeplayed.“Dateformat”cansetthedisplayformatoftheclockin
themainmenuandstandbymode.Pressthekeytomovethecursordownkeytomoveupthecursor.
Selecttheparameteroptionaccordingtothesettingkeytoconfirmtheadjustment,thenpressthe
buttontoincreasethevolume,pressbuttontoreducethevolum,adjustitandpress
toconfirm.
On“system”menu,movethecursortothe“systeminformation”andpressbuttonintoit.It
includessoftwareversion,MCUversion,releasedate,reboot,SDfreespace.
Insystemmenu,movecursorto“Language”,pressenterto“Language”menu.Itistomodify
menutextandscreenlanguageofindoorunit.Pressonetime,thearrowsintwosideswill
changecolor,meanscanadjustparameters,pressconfirmagainafteradjustment,languagesetup
successfully.
1.1 System - Language
1.2 System - Clock
1.3 System - Information

13 14
Notice: Localinternetwillrememberlastconnectwifiinformation,sorebootmonitorwillautoconnectwifi.
Inordertomakesureandcheckwificonnectsuccess,throughmonitorQRcodeandscanit, 
APPwilldisplaymonitorconnectordisconnectSIPserver.

“Onsystemmenu,movethecursorto“Volume”andpresstoenterthe“Volume”menutoset
uptheringvolume.Userscansetupdifferentringvolumeduringthreedifferenttimeperiod,the
vibrateandringtimecanbeadjustedfrom10sto45swhencalling.
Thetimingvolumeisthevolumeofthecall.
3 Ring Volume
[Ring Vol1]:
[Ring Vol2]:
[Ring Vol3]:
[Button Voice]:
ThevolumelevelofRingVol1:01-10.
ThevolumelevelofRingVol2:01-10.
ThevolumelevelofRingVol3:01-10.
Thisoptioncanopenorclosebuttonvoice.
Note:
4. System-Network Setting
4.1 WiFi Set
4.2 Server setting
Smartlink mode connection:
AP Mode:
Enternetworksetting,monitorconnectnetworkandserver,outdoorstationcallindoormonitor,
smartphoneAPPgetmessageatthesametime.Networksettingincluded:wifisetandserverset.

Twomode:SmartlinkandAPmode.

ChoosesmartlinkmodeorAPmodeconnectwifi,aftermakeserverset.

Notice: UseWiFisetfunctionmustbeworkwithsmartphone,APPnam（e Wifiintercom-D）

Andrioddownloadfrom“GooglePlay”,IOSdownloadfrom“APPStore”

(1).Usesmartlinkandconfirm,interfacetips”smartlinkmodeactivepleasewait.....”
(2).Monitortips“pleasechoosesmartlinkmodefromAPPandsendSSIDandpassword”
AtthismomentswitchonAPP(Wifiintercom-D)andpress“+”entersmartlinkmode,inputwifi
passwordpressnextstep.
(3).Sendrightinformationmonitortips”connectrouter,pleasewait......”monitorautoregisterfrom
serverwithin3Min.Note:duringprocessdonotpressanybutton,feedbacksuccessfultipsanddo
nextstep.
(4).After,interfaceshowwificonnectingtips,ifwifiname,passwordorovertimeconnection,please
startfromstep1again.
(5).Ifmonitordisplay“registerserversuccess”tipsmeansconnectwifisuccess,presssettingkey
confirm,andbacktostandbymode,leftcornerappearwifiiconmeansmonitoralreadyconnect
wifi.
(6).Interfaceconnectsuccess.

(1).ChooseAPmodeandconfirm,monitoractivesmartbellwififlashpoint.
(2).Monitorshowtips”,pleasechooseAPmodefromAPPandsendSSIDandpassword”Smart
phoneconnectwifiname:smartbellwifipassword：87654321,connectionsuccessed,switch
onsmartphoneAPP(Wifiintercom-D),press“+”enterAPmode,inputwifinameandpassword,
pressnextstep.
(3).Sendrightinformationmonitortips“connectrouter,pleasewait......”monitorautoregisterfrom
serverwithin3Min.Note:duringprocessdonotpressanybutton,feedbacksuccessfultipsand
donextstep.
(4).After,interfaceshowwificonnectingtips,ifwifiname,passwordorovertimeconnection,please
startfromstep1again.
(5).Ifmonitordisplay“registerserversuccess”tipsmeansconnectwifisuccess,presssettingkey
confirm,andbacktostandbymode,leftcornerappearwifiiconmeansmonitoralreadyconnect
wifi.
(6).Interfaceconnectsuccess.

(1).Enter“Serverset”choosetheserverwhichonenearbyyourlocated,whentips“serverregister
success”openAPP（Wifiintercom-D）press“+”scanQRcode
(2).Bindingsuccessbacktostandbymode,interfacerightcornerappear“network”iconmeanssuccess.
(3).Ifwifiandserverconnectsuccess,outdoorstationcallindoormonitor,smartphonecangetmessage
atthesametime.


[Door2 status]:
[Message]:
[Record mode]:
[Motion Detection]:
[Door1 Unlock Time]:
[Door2 Unlock Time]:
[Return]:
EnableordisablethepreviewofDoor2.
Enableordisablemessage.
Optionsinclude:VideoandSnapshot.Videomeanswhenthevisitorpresses
thecallbutto nofou tdoorunit,theindoormonitorwi t htheSDcar dwill
automaticallystartthevideountiltheendofthecallortheuser’smanualstop.
Thesnapshotmeansthatwhenthevisitorpressthecallbuttonofoutdoorunit,
theindoormonitorwithSDcardautomaticallysnapshotthenextphotoofthe
doorwaycamera,andtheusercanpressmanuallyforcontinuous
snapping.
Optionsinclude“Door1”,“Door2”,“CAM1”,“CAM2”and“Disable”.
From02secondsto10seconds.
From02secondsto10seconds.
Exitthecurrentmenu.
“Onmainmenu,movethecursortotheoption“Alarm”,thenpresstoenterthe“Alarm”menu.

7. Set the alarm parameters
[Alarm record]: Optionsinclude“Video”and“Snapshot”.“Video”indicatesthatwhenanalarm
istriggered,itwillactivatethecorrespondingchanneltostartalarmrecording.
“Snapshot”indicatesthatwhenanalarmistriggered,itwillactivatethecorresponding
channeltocaptureapictureofthecurrentvideostreamasastillphoto.
“Onmainmenu,movethecursortotheoption“Mode”,thenpresstoenterthe“Mode”menu.

6. Set the mode of indoor unit
[Mode]: Optionsinclude“01,02,03,04,05,06”.“01”indicatesthattheindoorunitasmaster
monitor,“02-06”indicatesthattheindoorunitasslavemonitor.
5. Digital Photo
Note: If open digital photo, can’t use motion detection.
“Onmainmenu,movethecursortotheoption“DigitalPhoto”,thenpresstoenterthe“Digital
Photo”menu.(forthemodelswithSDcard)

[Digital Switch]:
[Interval Time]: Thetimelevelofpictureplay:01-10.
Thisoptioncanopenorclosedigitalswitch.
Thereneedtobeseparatedfilenamedas“User”forSDcard.Thepicturecanonlybefound
andshownwhentheyaresavedinthefilenamed“User”.
15 16
[CAM1 Sensor type]:
[CAM2 Sensor type]:
I/O status types:
CAM1channelcorrespondstoanI/Ostatus(seethefollowingstatus
explanations),whichmeansthatwhenanalarmistriggered,itwillactivate
thecorrespondingchanneltostartalarmrecordingorcaptureasnapshot.
CAM2channelcorrespondstoanI/Ostatus(seethefollowingstatus
explanations),whichmeansthatwhenanalarmistriggered,itwillactivate
thecorrespondingchanneltostartalarmrecordingorcaptureasnapshot.
No: “Normalopen”,itmeansthatinitsnormalstate,thesensoriskeptunderconstantlowvoltage.If
theoutputvoltagechangesfromlowtohigh,thenthealarmwillbetriggered.
NC: “Normalclosed”,thenormalstateofthesensorisunderconstanthighvoltage.Iftheoutput
voltagechangesfromlowtohigh,thenthealarmwillbetriggered.
Disable: SettheI/Oto“close”,ifexternalsensoralarmsarenotinuse.
[CAM1]:
[CAM2]:
[CAM1 ring time]:
Enableordisablethepreviewofcamera1
Enableordisablethepreviewofcamera2
Thealarmringtimeofcamera1ifcamera1hasbeentriggeredbyactivety
detectedbythesensor,valuescanbesetfrom0~20seconds.

Note:Setupfilefoldernameas“Music”fromSDcard,keepmusicunder“music”folder.“music”
foldermax.save30music.
03:52
By2 9. 00 M
02: 12
[CAM2 ring time]:
[Return]:
Thealarmringtimeofcamera2ifcamera2hasbeentriggeredbyactivety
detectedbythesensor,valuescanbesetfrom0~20seconds.
Backtopreviousmenu.
“Onmainmenu,movethecursortotheoption“Media”,thenpresstoenterthe“Media”menu.
Optionsinclude“music”,“photo”and“File”(forthemodelswithSDcard).

8. Media
8.1 Music ( for the models with SD card )
Inthemediamenu,pressortomovethecursortothe“music”option,press
intotheplaylist,automaticallyplaythefirstmusicintothemusiclist,pressingmovethecursor
down,pressmovethecursormovingupward,keeppressingtheismoveforward,keep
pressisbackforward,pressoncetopause,selectasongwithsettingisconfirmedtoplay,
pressisreturntothepreviousmenu.
Whenplayingmusic,pressatransferbuttonswitchaplaymode.Theplayingmodesincludesingle
play,randomplay,sequentialplay,singlecycleandlistloop.Singleplayer:afterplayingthissong
willautostop;randomplayback:randomplayallthesongs,donotstop.Circleplaying;theorderof
play:playallthesongsfromtoptobottom,theplayerstopafterthelastsong;Singlecycle:always
repeatthesamesong,donotstop;Cycle:repeattheorderofplayallsongs,playthelastsongagain
fromthefirsttothelasttocirculattheorderofplay.
istopauseandpopuppictureinformationatalongtime,Thepictureinformationincludesshooting
time,filesize,storagelocationandimagesize.Afterpressingagain,thekeywillbecomeamanual
play,andthenextpictureisplayed.Pressisreturnedtothelistofpictures.
Note:Thenextpictureisplayedautomaticallywhenthepictureisplayed,unlessyouchangeittoa
manualplay.
Inthe“Media”menupressupordownbuttontomovethecursordowntothe“picture”option. Press
thebuttontoenterthepicturelist,pressortomovethecursor,selectthepictureyou
wanttoplay,andconfirmtheplaybypressingsettingbuttononce.Inthepicture,keeppressing
8.2 Photo ( for the models with SD card )
Note: Photo folder contains only photo files in SD card.
InSDcard,aseparatefolderiscalled“user”.Thereisafoldercalled“picture”intheuser.
Itcanbefoundanddisplayedonlywhenthepictureissavedinthefilenamed“picture”.
15 1617 18
Entermanagersystem,therewillshowtwofile“DCIM”“USER”.
8.3 File Manager ( suit for support SD card device )
manager system
USER
DCIM
ring
[Delete file]:
[DCIM Folder]:
[USER Folder]:
[Upgrade]:
[MCUUpgrade]:
Press“+”or“-”choosethefileyouwantdelete,longtimesetkeyshowtip“deletefile?”
 DCIMfileissystemautobuiltupandkeeprecordfolder,insidehavephotofile
andvideofile.Photofoldersavemonitorautosnapshotandmanualcapturepictures;
Videofoldersavemonitorautorecordormanualrecordvideos.
USERfolderincluded“music,photo,ring,update”folder.
Musicfoldersavemediamusic.
Photofoldersavedigitalphotoframepictures.
Ringfoldersavedefaultringtone.
Updatefoldersaveupgradefile.
MoveFW(xxx.dd)underupdatefolder,chooseupgradefilenameas”xxx.dd”,press
setkeysystemdisplay“update”choose“Yes”andwaitupgradingtillsuccess.
Notice:Duringsystemupgrading,notallowmoveoutSDcardorcutoffpower.Onlywaitupgrade
successdevicewillautoreboot.
copyMCUfile(xxx.bin)toupdatefilefolder,selectMCUfile(xxx.bin)andconfirm
“updateornot”.

17
“Onmainmenu,movethecursortotheoptionRecord”,thenpresstoenterthe“Record”menu.
Optionsinclude“Video”,“Picture”and“Return”(forthemodelswithSDcard)

9. Record
On“Record”menupressthebuttonorupwardordownwardtomovethecursortothe
option“Videofiles”,pressthebuttontoenterthe“Videofileslist”.pressthebuttonor
upwardordownwardtomovethecursortoselectfiletoplayback,ablacklistindicatesthatthe
listhasbeenselected,pressthebuttontoplayback.Duringplaybackpressthebutton
toexitthecurrentmenu.
9.1 Video ( for the models with SD card )
Note: Video folder contains only the video file recorded by the outdoor station.
On“Record”menuscrollthebuttonorupwardordownwardtomovethecursortothe
option“Picturefiles”,pressthebuttontoenterthe“Picuterfileslist”.Scrollthebuttonor
upwardordownwardtomovethecursortoselectfiletoplayback,ablacklistindicatesthat
thelisthasbeenselected,pressthebuttontoplayback.Duringplaybackpressthebutton
toexitthecurrentmenu.
9.2 Picture ( for the models with SD card )
19 20
Thefileofthephotoorvideoisstoredinthe“DCIM”folderthatthesystemautomaticallygenerates.
Note: Picture folder contains only picture file taken by the outdoor station.
Inmonitoring,calling,intercom,alarmandothermodes,clickthetransferbuttontoactivatethe
coloradjustment,includingvolume,brightness,contrast,saturation,refreshandreturn.
10. Set the color parameters
valuescanbesetupfrom0to50,defaultas25.
valuescanbesetupfrom0to50,defaultas25.

[Bright]:
[Contrast]:
valuescanbesetupfrom0to50,defaultas25.

[Volume]:
[Refresh]:
[Saturation]:
Adjustthevoiceofthecalloftheindoormonitor.
door1
Note:Thevolumeregulationhereisthevolumeofthecall.
05 25 25 25

TerminalandGNDisshorted,thealarmisactivate,thespeakeroftheindoorunitringsandcontinues
120s,duringthistime,clicktostopalarmingandenterthestandbymode.
ALARM INSTRUCTIONS
ForthemodelswithSDcard,simultaneously,triggersrecordingorsnapshotting(relatedtothe
systemsettings).Therecordingtimeis120s,duringthistime,clicktostopalarmingandenter
thestandbymode.
Beapplicabletoconnect2normallyclosed(NC)ornormallyopen(NO)alarminputs.
2camerachannelsofalarminputwithoutlimitationsoninputtype(caneitherbethenormally
opentypeorthenormallyclosedtype).
ALMterminalofthealarmdetectorisconnectedinparallelwiththeALMterminal(Thealarm
detectorshallbesuppliedbyexternalpowersupply).
GroundterminalofthealarmdetectorisconnectedinparallelwiththeGNDterminalofthe
camera.
ForNOalarminputs,whentheGNDandALMareintheconnectionstate,itwilltriggerthe
alarm.
Connection diagram:
ForNCalarminputs,whentheGNDandALMareinthedisconnectstate,itwilltriggerthe
alarm.Itappliestoanyalarmsensor.
Pleasebefarfromthedeviceswithintenseradiation:
TV,DVR,etc.
Donotdisassembleprivatelytoavoidtheelectricshock.
Donotdrop,shakeorknockthedevice,otherwisewill
damagetheelements.
Keepatadistanceofmorethan30cmwithACpowertoavoidinterference.
Awayfromthewater,magneticfieldandchemicals.
Pleasepowerdownbeforeinstallation.
Choosethebestpositiontoinstall,thehorizontalviewis
150cm.
Note:
INSTALL THE INDOOR UNITINSTALL THE INDOOR UNIT
How to install the indoor unit
plastic stent
cables
21 22
ProductType AHD720P/960P/CVBSVideoInput,CVIVideoInput,TVIVideoInput
Monitor
7"(1024*600)
Resolution
7"TFTLCD
Standard PAL/NTSC
CallingMode Duplex/cloundintercom
SPECIFICATION
PowerConsumption Maximum500mA/600mA
ExternalpowerDC12V;BuiltinpowerAC100-240V
2GB~32GBclass10TFminicard(write/readspeed≥Class10)
Surfacemounting
Powersupply
WorkTemperature
InstallationWay
SDCardMaxCapacity
0~+50℃
MotionDetection
System
Yes
InputVideoSignal CVBS,CVI,TVI,AHD2.0
Function Unlocking/Monitoring/Intercom/TransferCall/Videorecording/APPmonitoring
Support6indoormonitor+2callpanel+2camera
Advantage Digitalphotoframe/MP3/Clock&message/Backgroundmusic/cloudintercom
(Optional)
ACCESSORIES
Indoorunit 1pcs
1pcs
1pcs
5pcs
1pcsor2pcs
4pcs
4pcs
PlasticAnchors
Screws
Bracket
4Pinline
2Pinline(optional,pleasetakeactualmodelasquasi)
Usermanual
-----------------------------
-----------------------------------------------------------------------------
------------------------------------------------------------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
-------------------------------------------------------------------------------
---------------------------------------------------------------------------
Indoor unit
Iftheindoorunitincludestheinternalpowersupply,thereisnoexternalpowersupplyswitchofthe
pictureontheabove.
1pcs
Externalpowersupplyswitch(optional)---------------------------------------------------