TypeS BT57131 Guide

Important, retain for future reference:
Read carefully
HD QUICK-CONNECT
WIRELESS BACKUP CAM
With 5” Hand Wave Activated Monitor
ITM. / ART. 296743
WP ITM. BT57131
Care & Use Instructions

TABLE OF CONTENTS
1. Introduction ...............................................................................................................................................................................1
2. Package Contents ...................................................................................................................................................................2
3. Product Specications ..........................................................................................................................................................3
4. Product Dimension ................................................................................................................................................................3
5. Installation Guide ....................................................................................................................................................................4
6. Settings and Operation ......................................................................................................................................................15
7. Safety Information ................................................................................................................................................................21
8. Maintenance & Warranty .................................................................................................................................................. 24

1
1. INTRODUCTION
Please read all of the installation instructions carefully before installing the product. Improper
installation will void manufacturer’s warranty. The installation instructions do not apply to all types
of vehicles, and are written as guidelines to assist in installing the system.
Consult an experienced technician if you are not comfortable installing the product. You can also
contact Type S at 866.294.9244 to speak to one of our installation specialists if you have any specic
questions regarding the HD Quick-Connect Wireless Backup Cam.
BEFORE using the HD Quick-Connect Wireless Backup Cam, please read the safety
information provided in this user manual. ALWAYS use the product as outlined in this user
manual.
Please make sure to read and understand all local laws and regulations regarding cameras and their
use in a vehicle. Laws vary by state.

2
2. PACKAGE CONTENTS
1. 1 x 5” Hand Wave Activated Monitor
2. 1 x Solar Powered HD Quick-Connect
Backup Camera
3. 1 x Magnetic Windshield Mount
4. 1 x Dash Mount
5. 14 x Mounting Tape
6. 1 x Join Metal Plate & 2 x Spare Metal
Plate Screw (Optional)
7. 1 x 33” MicroUSB Charging Cable
8. 1 x 12V/24V Power Adapter
9. 1 x 250V 2A Spare Fuse
10. 4 x License Plate Self-Tapping Screw
(Optional)
4 x License Plate Machine Screw
(Optional)
11. 2 x Mounting Screw & Nut (Optional)
12. 8 x Spacer (Optional)
13. 1 x Instruction Manual
14. 1 x Quick Install Guide
15. 1 x Warranty Card
6.
7.
8.
2.
4.
1. 9.
5.
12.
10.
11.
13.
14.
15.
3.
QIG-57131UK_V1
HD QUICK-CONNECT WIRELESS BACKUP CAM
With 5Ó Hand Wave Activated Monitor
2975Red Hill Ave., Ste. 100, Costa Mesa, CA 92626
1.866.294.9244| [email protected]
©2019Type S. All rights reserved.
www.typesauto.com
AHorizon Brands Company
BACKUPCAM MOUNTING - OPTION A UK/EULICENSE PLATE WITH SCREWS
2 3
Spacer
1Peeloff
Peeloff the adhesive tape backings from the Backup
Cameraand mount the license plate on the Backup Camera.
Alignthe holes on the license plate to the holes of the rear
bumperand tighten the screws.
Insertspacers when tightening the screws in order to level
thespace between the license plate and the rear bumper.
www.typesaut o.com/ register
Registerthis product within 30 days of purchase to receive 1 FREE YEAR of additional warranty coverage
(beyondthe standard one year warranty), along with special product offers and announcements.
Registreeste producto dentro de los 30 d’as siguientes a la compra para recibir 1 A„O GRATUITOde
coberturade garant’a adicional (m‡s all‡ de la garant’a est‡ndar de un a–o), junto con ofertas de productos
yanuncios especiales.
Enregistrez ce produit dans les 30 jours suivant l'achat pour recevoir une couverture supplŽmentaire
GRATUITEDE 1 AN (au-delˆ de la garantie standard d'un an), ainsi que des offres et des annonces spŽciales.
STOP
ARRæT
DETƒNGASE
Mon-Fri, 8am-5pm PST / Lundi au vendredi, 8h ˆ 17h HNP /
Lun-vie, 8 a. m. a 5 p. m. Hora del Pac’fico
[email protected] / [phone]
Pleasecontact our customer service befo rereturning this p roductto
thestore. Our friendly representatives are happy to help with any
questionsor concern s you have.
P—ngaseen contacto con nuestro servicio a clientes antes de regresar
esteproducto a la tienda. A nuestros amables representantes les dar‡
muchogusto ayudarle con cualquier pregunta o inquietud que tenga.
Veuillezcommuniquer avec notre service ˆ la client le avant de
retourner le produit au magasin. Nos reprŽsentants se feront un plaisir
de vous assister pour toute question ou prŽoccupation.
Productcode / Code de produit / C—digo del producto : BT57131
ML-57131DNR_V1
@TypeSAuto

3
1. Frequency: 2.4GHz
2. Operating Voltage: Monitor - DC 12V/24V, Backup Cam - DC 5V
3. Operating Temperature: -10ºC~50ºC (14ºF~122ºF)
4. Camera Water Resistance: IP65 Rating
5. Battery Capacity: 3350mAh
6. Maximum Signal Range: 10 Meters/33 Feet
(without interference or obstruction)
3. PRODUCT SPECIFICATIONS
4. PRODUCT DIMENSION
290mm / 11.41” 51mm / 2”
55mm / 2.17”
58.8mm /
2.31”
56.2mm /
2.21”

4
5. INSTALLATION GUIDE
DASH MONITOR INSTALLATION
1. Place Magnetic Windshield Mount on the windshield and adjust to your desired position.
2. Attach the Dash Monitor on to the Magnetic Windshield Mount.
3. Remove the Dash Monitor protective overlay.
4. To power the Dash Monitor:
Take the 12V/24V Power Adapter and plug adapter into the right side of the Dash Monitor. Plug
the other end into 12V/24V power port in your car.
5. Now, the Dash Monitor is ready to be activated by the motion trigger when you wave your hand
in front of the monitor or press the Wake-up Button on the top left of the Dash Monitor.
Warning: Many vehicles provide constant power to the 12V outlet. If your outlet provides
constant power, please remember to unplug the Dash Monitor when not in use to avoid draining
the vehicle battery.
NOTE: Fully charge and test camera before installation.
Push and hold the power button of
the HD Quick-Connect Wireless Backup
Cam for 1 second, the blue LED light
will ash 2 times.
Power on the Monitor with the 12V/24V
adapter. You can see the parking view when
you wake up the HD Quick-Connect Wireless
Backup Cam through wake-up button or
motion trigger in front of Monitor.
Blue LED light

5
HD QUICKCONNECT WIRELESS BACKUP CAM INSTALLATION
OPTION A  UK/EU LICENSE PLATE WITH SCREWS:
1. Peel o the adhesive tape backings
from the Backup Camera and mount
the license plate on the Backup
Camera.
2. Align the holes on the license plate to the holes of the rear bumper and tighten the screws.
Peel o

6
3. Insert spacers when tightening
the screws in order to level
the space between the license
plate and the rear bumper.
Spacer
OPTION A  DONE

7
OPTION B  UK/EU LICENSE PLATE WITH ADHESIVE MOUNTING TAPES:
1. Peel o the adhesive tape
backings from the Backup Camera
and mount the license plate on the
Backup Camera.
2. Attach 4 double sided mounting
tapes (4.5mm thickness) to the
back of the Backup Camera, and
4 double sided mounting tapes
(6mm thickness) to the back of the
license plate.
3. Peel of all the double sided
mounting tape backings and
mount to the rear bumper.
6mm
6mm
6mm
6mm
4.5mm 4.5mm
4.5mm 4.5mm
Peel o
2.
OPTION B  DONE

8
OPTION C  UK/EU LICENSE PLATE WITH LICENSE PLATE FRAME:
M
TYPES
D
1. Open the license plate frame and remove the license plate.
2. Unscrew and remove the license plate frame from the rear bumper.

9
3. Put the license plate back into the
license plate frame.
4. Peel o the adhesive tape backings
from the Backup Camera and
mount the license plate frame on
the Backup Camera.
M
TYPES
D
M TYPES
D
Peel o

10
M TYPES
D
5. Attach 4 double sided mounting
tapes (4.5mm thickness) to the
back of the Backup Camera, and
6 double sided mounting tapes
(6mm thickness) to the back of the
license plate frame.
6mm 6mm
6mm
6mm
6mm
6mm
4.5mm 4.5mm
4.5mm
4.5mm
OPTION C  DONE

11
OPTION D  UK/EU LICENSE PLATE WITH LIMITED SPACE AT THE TOP OF LICENSE PLATE:
1. Unscrew and remove the Solar
Panel Mounting Plate and Backup
Camera Mounting Plate.
2. Position the Backup Camera below
the Solar Panel. Use the provided
Join Metal Plate to attach them
together. Tuck the cable at the
back of the Backup Camera and
pass through the hole in the Join
Metal Plate. Reinstall the 4 screws
to the back of the Backup Camera.
Join Metal Plate
Solar Panel
Backup Camera

12
3. Attach the Solar Panel Mounting
Plate to the back and reinstall the
4 screws to the back of the Solar
Panel.
4. Peel o the adhesive tape
backings from the Backup Camera
and mount the license plate on the
Backup Camera.
NOTE: Make sure you only attach the
Solar Panel Mounting Plate NOT the
Backup Camera Mounting Plate.
M TYPES
D
Peel o
OR

13
6mm 6mm 6mm 6mm
6mm
6mm 4.5mm 4.5mm
6mm 6mm 6mm
6mm
6mm
6mm
6mm
6mm 4.5mm
4.5mm
5. Attach double sided mounting
tapes to the back of the license
plate according to the 2 gures on
the left.
Mount the Backup Camera and
license plate on the rear bumper.
LICENSE PLATE
LICENSE PLATE FRAME

14
M TYPES
D
OPTION D WITH LICENSE PLATE  DONE
OPTION D WITH LICENSE PLATE FRAME  DONE

15
POWER ON/OFF
• The Dash Color Monitor will automatically turn ON when it is connected to a power source.
• Hold the Power button to turn ON/OFF the unit, if necessary.
• Press the Power button to return to previous page from each of the Menu setting pages.
PARKING AID LINE
• You can turn ON/OFF the Parking Aid Line by pressing the Parking Aid Line button when the
reverse image appears on screen.
• You can adjust the Parking Aid Line that appears in your Monitor. When the Parking Aid Line is
engaged, press and hold the Parking Aid Line button for 3 seconds until the parking line ashes,
then press the “+” or “-” to adjust up or down on the Monitor. There are a total of 10 adjustments
that can be made.
• You can go into the setting function page when you press the Parking Aid Line in the Menu.
Then you can congure the settings function when you press Parking Aid Line in any setting
page.
BRIGHTNESS AND CONTRAST
You can adjust the contrast and brightness of the Monitor according to your desired level.
Note: Contrast and Brightness setting ONLY works while the camera image is on the screen.
Power Parking Aid Line / Enter
Up
Menu
Down
Wake-up Button
6. SETTINGS AND OPERATION

16
PAIRING
The HD Quick-Connect Wireless Backup Cam included is already paired with the Monitor. If you can
not see the Camera image, pair the Camera with the following steps:
1. Power on the HD Quick-Connect Wireless Backup Cam
2. To enter Pairing Mode, press and hold the Power Button under the camera for 5 seconds, or
until the LED ashes continuously. The camera will remain in Pairing Mode for one minute.
3. On the Monitor:
Press “Menu”
Go to “Pair Camera”
Press “Parking Aid line” to conrm
The unit is now in pair mode - if the Monitor is able to connect with the camera, the display
will show “Pair OK”.
If no camera is found, then the display will show “Pair Fail”. In this case, cut o power and reboot
the Monitor. If you keep receiving the “Pair Fail” message after several attempts, please call our
technical support to assist in troubleshooting.

17
ROTATE CAMERA
1. Press “MENU”
Go to “Rotate Camera” by pressing “– “
2. Press “Parking Aid Line”to enter
3. Press “+” or “-” to rotate screen direction
4. Press “Parking Aid Line”to conrm and exit
TO ADJUST BRIGHTNESS
1. Press “MENU”
2. Go to “Brightness” by pressing “– “
3. Press “Parking Aid Line”to enter
4. Press “+ “ or “– “ to adjust the contrast level
5. Press “Parking Aid Line”to conrm and exit

18
TO ADJUST CONTRAST
1. Press “MENU”
2. Go to “Contrast” by pressing “– “
3. Press “Parking Aid Line”to enter
4. Press “+ “ or “– “ to adjust the contrast level
5. Press “Parking Aid Line”to conrm and exit
OPERATION TIME
The Monitor’s parking view operation time will start to count down when you wake up the license
plate camera. When the timer runs out, the parking view will automatically turn o.
1. Press “MENU”
2. Go to “Operation Time” by pressing “– “
3. Press “Parking Aid Line”to enter
4. Press “+ “ or “– “ to adjust the operation time
5. Press “Parking Aid Line”to conrm and exit