ubiquoss E3208E User manual

PON
O
N
U
E3208E
Installation Guide

E3208E
Installation Guide
II
.
ubiQuoss Inc.
24F Millennium B/D, 467-12 Dogok-Dong
Gangnam-Gu, Seoul 135-700 Korea
TEL: [phone]
FAX: [phone]
E-mail: [e-mail]
www.ubiQuoss.com

PON
O
N
U
Preface
This preface provides the overview of E3208E installation guide, which describes guide
conventions, and lists other publications that may be useful.
Introduction
This manual is to describe how to install ubiQuoss E3208E Switch.
This manual is the hardware installation guide for installing and connecting E3208E
Switch.
Chapter 1 describes the name and function of each part of the product, and chapter 2
describes the requirements for installation of the product and the cautions. Please read
chapter 1 and chapter 2 before starting installation of the product to install and use the
product safely.
The user manual, command manual, and configuration manual that come with this
installation guide covers the functions, usage, and settings more in detail.
The audience of this installation guide is technicians who have experiences in installing
and managing network equipments. Therefore for the technical terms not mentioned in
this installation guide, please refer to other network related materials.
Related Documents
For additional information on this equipment, refer to the following manuals.
Manual Contents
User Guide
Operating configuration for services
System operation, administration and maintenance
Trouble Shooting
Product Name
The ONU described in this manual use the following product name.
E3208E ONU
History of Document
Date Version
2012. 06 First Edition
E3208E Installation Guide III

Preface
PON
O
N
U
Symbols in this Guide
The symbols below are used to indicate the product names and notes in the user guide.
Description of Symbols
The installation guide uses the following icons and fonts to indicate special messages for the
reader.
Note Presents the useful contents related to the user guide, the references
and data related to the product use, etc.
Caution Describes the situation that data loss and incorrect product operation
can occur, and provides the proper actions to take in the situation.
Warning Describes the situation that product damage and the user’s injury can
occur, and provides the proper actions to take in the situation.
Warning Invisible laser radiation may be emitted from disconnected fibers or
connectors. Do not stare into beams or view directly with optical
instruments.
Warning Do not disassemble or assemble the product.
The user must not remove/attach the product cover or
disassemble/assemble the product when the power is on. Otherwise, it
can cause personal injury or property loss.
Introduction
IV

PON
O
N
U
Organization
The installation guide consists of four chapters and two appendices. The summary of each
part is described below.
Chapter 1. Introduction
This chapter describes the types and features of E3208E and explains the name and
function of each part.
Chapter 2. Installation Preparation
This chapter describes the necessary items to install E3208E Switch and the notes to
take about installing and using the product. The user should fully understand the notes in
this chapter before installing the product to prevent any problem from occurring during
the product installation.
Chapter 3. Installation
This chapter describes how to install E3208E Switch on a rack and connect each port of
the switch.
Chapter 4. Troubleshooting
This chapter describes the troubles that may occur during installation or use of E3208E,
and explains how to solve the problems.
Appendix A. Product Specification
Appendix A describes the product specifications of E3208E.
Appendix B. Cable Spec
Appendix B describes the specification of cables used to connect the ports of E3208E in
detail.
E3208E Installation Guide V

Table of Content
PON
O
N
U
Table of Content
Preface.......................................................................................................................... III
Introduction...................................................................................................................... III
Related Documents ......................................................................................................... III
Product Name.................................................................................................................. III
History of Document ........................................................................................................ III
Symbols in this Guide......................................................................................................IV
Organization .................................................................................................................. V
Table of Content............................................................................................................ VI
List of Figure and Table .............................................................................................. VIII
List of Figure ................................................................................................................. IX
Chapter 1. Introduction...........................................................................11
Overview...................................................................................................................... 12
Features....................................................................................................................... 13
Front View ......................................................................................................................13
Rear View.......................................................................................................................16
Side View........................................................................................................................ 17
Chapter 2. Installation Preparation ........................................................18
Pre-installation Checklist ............................................................................................. 19
Do not disassemble the product ..................................................................................... 19
Place Requirements for Installation ................................................................................ 19
Complying with operation environment condition ........................................................... 19
Preventing Static Electricity ............................................................................................ 19
Requirements for handling Power .................................................................................. 20
Grounding.......................................................................................................................21
Lightening....................................................................................................................... 21
Preventing Overheating.................................................................................................. 21
Notes for Cleaning.......................................................................................................... 21
Other Notes .................................................................................................................... 21
Working with Lasers ....................................................................................................... 21
Items Required for Installation..................................................................................... 22
Contents of Package ...................................................................................................... 22
Chapter 3. Installation.............................................................................23
Installation Procedure .................................................................................................. 24
Selecting Installation Place............................................................................................. 24
Connecting Power .......................................................................................................... 24
Battery Operating ........................................................................................................... 25
Connecting Console Terminal......................................................................................... 25
Connecting EPON Up-Link port................................................................................... 27
Connecting EPON Up-Link port...................................................................................... 27
Chapter 4. Troubleshooting....................................................................29
Troubleshooting Case.................................................................................................. 30
Appendix A. Product Specification ........................................................32
Introduction
VI

PON
O
N
U
Specification....................................................................................................................32
Appendix B. Cable Spec..........................................................................33
Ethernet cable.................................................................................................................34
Optical cable ...................................................................................................................34
Console cable .................................................................................................................35
E3208E Installation Guide VII

List of Figure and Table
PON
O
N
U
List of Figure and Table
Table 1 Console port Specification......................................................................... 14
Table 2 System status LED....................................................................................15
Table 3 Port status LED .........................................................................................15
Table 4 List of Package Items ................................................................................ 22
Table 5 Specification .............................................................................................. 32
Table 6 Configuration of terminal mode .................................................................35
Introduction
VIII

E3208E Installation Guide IX
PON
O
N
U
List of Figure
<Figure 1> E3208E ONU Front View.................................................................. 13
<Figure 2> E3208E ONU Up-Link Port Front Feature........................................... 13
<Figure 3> LEDs and Console Port....................................................................... 14
<Figure 4> Console Port Pin numbers .................................................................. 14
<Figure 5> System Status LED ............................................................................. 15
<Figure 6> Fast Ethernet 8 Ports .......................................................................... 15
<Figure 7> E3208E ONU Real Panel.................................................................... 16
<Figure 8> RST button .......................................................................................... 16
<Figure 9> E3208E ONU Right / Left Side............................................................ 17
<Figure 10> Connecting AC power cable, DC power lines, and Grounding Cable.25
<Figure 11> Diagram of Console Cable ................................................................ 35

PON
O
N
U
Chapter 1. Introduction
This chapter describes the types and features of E3208E and explains the name and
function of each part.
This chapter consists of the following sections.
Features of Product
Appearance of Product
E3208E Installation Guide 11

Overview
PON
O
N
U
Overview
This section describes the function and characteristics of an ONU device, E3208E.
E3208E is a Fast Ethernet L2 switch used in access network segments to provide
broadband multimedia service. It can provide high performance switching service to
subscribers. It can be also deployed economically because it is based on 100Mbps downlink
speed as FE and an uplink port as GE-PON.
E3208E is the best solution for medium size networks with high traffic volumes. E3208E also
provides advanced network management and switching functions that follow the global
standard. E3208E consists of eight FE ports and one Uplink module as GE-PON port.
Introduction
12

PON
O
N
U
Features
Front View
This section describes the name and function of each part on the front panel of E3208E.
<Figure 1> E3208E ONU Front View
The front panel has console port (RJ-45 Type), Fast Ethernet 10/100B-T 8 ports, E-PON Up-
link, and LEDs for system status.
Up-Link Slot port
Warning Invisible laser radiation may be emitted from disconnected fibers or
connectors. Do not stare into beams or view directly with optical
instruments.
E3208E ONU provides E-PON UP-Link port.
<Figure 2> E3208E ONU Up-Link Port Front Feature
E3208E Installation Guide 13

Features
PON
O
N
U
Console port
<Figure 3> LEDs and Console Port
<Figure 4> Console Port Pin numbers
The console port is used to connect a console terminal to manage E3208E. The console
cable (Serial Cable) that is used to connect between the console port and a console terminal
comes with the product. A PC, workstation, or VT-100 with terminal emulator program
installed can be used as a console terminal. The following table show the console port
specification..
Table 1 Console port Specification
Item Setting
Standard UART
Baud Rate 9600 bps
Connector Type RJ-45
Data Bits 8 bit
Stop Bits 1 bits
Parity Bit None
Terminal
Environment
Flow Control None
Introduction
14

PON
O
N
U
System status LED
<Figure 5> System Status LED
E3208E provides various system status LEDs that shows the power supply status and so on.
System status LED works as follows based on the system status.
Table 2 System status LED
System status LED
LEDs Color Status
LINE
Green
Red
Orange
EPON Link-up
EPON Link-down
EPON Link-up
(Rx sensitivity -26dBm ~ -24dBm)
PWR Green
Off
Power Normal
Power Off
DATA Green Blink
Off
EPON Data Tx/Rx
EPON no Data
Fast Ethernet 8 Port
E3208E has port status LEDs that indicates the operating status of ports. System status LED
works as follows based on the system status.
Table 3 Port status LED
System status LED
LEDs Color Status
Port 1~8
Green On
Green Blink
Orange On
Off
100B-T Link On
100B-T Traffic Tx/Rx
Threshold
Link Off
<Figure 6> Fast Ethernet 8 Ports
E3208E Installation Guide 15

Features
PON
O
N
U
Rear View
E3208E has an AC INLET, battery socket and reset button on the rear side.
<Figure 7> E3208E ONU Real Panel
RST Button
<Figure 8> RST button
E3208E has a reset button on the side of the system so that the user can manually reboot
the system by pressing the RESET button.
Note Please use a pen or thin material, and press the reset button gently.
Introduction
16

PON
O
N
U
Side View
Air Flow
The vent hole is the part required for air intake or outtake to prevent the Switch from getting
overheated.
<Figure 9> E3208E ONU Right / Left Side
E3208E Installation Guide 17

Features
PON
O
N
U
Chapter 2. Installation Preparation
This chapter describes the necessary items to install E3208E Switch and the notes to take
about installing and using the product. The user should fully understand the notes in this
chapter before installing the product to prevent any problem from occurring during the
product installation.
This chapter consists of the following sections.
Pre-installation Checklist
Necessary items for installation
Checking the package items
Installation Preparation
18

PON
O
N
U
Pre-installation Checklist
Before installing and using E3208E Switch, please read this section carefully and follow the
instructions.
Do not disassemble the product
The user should not disassemble the product. If the user thinks that a repair is necessary,
contact the Ubiquoss Technical Support Team.
Place Requirements for Installation
The product should be installed in the site satisfying the following conditions to use the
product safely and stably:
Avoid the location whose temperature is too high or too low.
Avoid the top of a shaky shelf, a tilted location, or the place with big vibrations.
Avoid the location that is not ventilated or airtight.
Avoid the location with water or moisture and direct sunrays. Choose the cool and dry
location. If water gets into the product, it can cause an electric shock or the product
failure.
Keep the surroundings of the product clean and dust-free during or after the product
installation.
An electro-magnetic wave can cause a problem to the product operation, so avoid the
location where an electro-magnetic wave is generated.
Install the product in the location that the user can easily access and connect a cable to
the product easily.
Complying with operation environment condition
E3208E Switch normally operates in the environment with the following conditions:
Operating Temperature: 0 ~ 50℃
Relative Humidity: 5 ~ 95%(non-condensing)
Even in the environment that satisfies the above conditions, if the product operates in the
excessively low or high temperature for long time, the product life becomes shorter or the
product is vulnerable to damage.
Preventing Static Electricity
The static electricity can cause serious damage to the device or a circuit, so please take the
following actions when using the product:
Always discharge the static electricity on the body before touching the product. (Use the
static electricity-preventing strap.)
Do not touch the internal components or connector pins with hands.
It is recommended to put the product into a static electricity-preventing envelop when
storing or moving the product.
E3208E Installation Guide 19

Pre-installation Checklist
PON
O
N
U
Requirements for handling Power
Ground all the cables connected to the product and connect them to the grounded
outlets to prevent and minimize the problem related to an electro-magnetic wave and a
surge.
The power supplied to the product should comply with the power requirements specified
in the user guide.
The product supervisor and user should check the grounding status and take proper
actions for the electric safety before the power is supplied to the product.
Do not touch the power plug with wet hands because it can cause an electric shock.
Do not pull the power cable out because it can cause a fire.
Do not use the power cable that is peeled or the one whose plug connection is not tight
because it can cause an electric shock and a fire.
Always check the working place for the possibility of any danger, the wet floor, non-
grounded power extension cable, the floor with no grounding facility, etc.
When connecting the AC power of E3208E, use the grounding-type plug and the
properly-grounded power.
The provided power cable includes a grounding line, so ground the outlet that the power
cable is connected to.
Connect the power cable in the safe place so that unknown people cannot be exposed to
it.
If the user uses other power cables than those provided with the product together, use
the ones that satisfy the specifications.
In case of product installation, installation site change, product transportation, and
product disassembling (only relevant engineers are allowed to do this), turn off the power,
remove the communication cables from all ports, and remove the power cables.
Installation Preparation
20