Ude GD-1000 User manual

Pre-recorded message generator with time control
GD-1000
71
rev.1
EQUIPOS Y SISTEMAS MEGAFONÍA / INTERCOM PUBLIC ADDRESS SYSTEMS
[email protected] BARCELONA - SPAIN
Tel.: [phone].503A
Up to 1440 events per day.
Up to 32 date ranges throughout the year.
SD Card incorporated (up to 32 GB) through USB port.
LCD screen to visualice date, time and 4 pushbuttons
to set hour and configuration.
1W 2" monitoring speaker.
3 pushbuttons in front panel for priority messages.
Front USB port to load files (the PC is recongnized
as an external unit) and to load the annual program
with the MasterSwitch software.
Stereo audio output with gain adjustment.
Connected to switch centrals WZ-1000A is able to
generate events for 50 zones (5 WZ-1000A)
In case of needing to control more zones the system
can be expanded adding more units of GD-1000
Main characteristics
Record, manage and reproduce messages in MP3 format.
You can decide hour, time and date to launch the messages.
Report about open and closing hours of your establishment.
Program your offers and promotions to reproduce them automatically.
Priority or evacuation messages.
.
Bell chimes for churches and Town Halls.
automatically
Activation of programmed messages acting to de
front panel pushbuttons A, B or C or through
clousured contact in the back panel.
Includes free license to manage the
data from PC via USB port.
MasterSwitch
Send specific messages to different zones or
groups.
Auxiliary remote control via terminals. Closed
contact when there is a message reproducing.
FRONT PANEL
SIDE PANEL
DIMENSIONS IN MILLIMETERS

7
2
610.503A
Rev.1
GD-1000
ON / OFF Switch
LED POWER
LED BUSY
Hour/Day set
LCD Display
Navigation pushbuttons
PROGRAM / FILE mode pushbutton
Conector USB port to load the program
“Priority messages” pushbuttons
RS-485 communication.
RS-485 Euroblock conector.
Remote controls input. Activation of priority messages.
Auxiliary remote control output.
Stereo audio output. RCA connectors
Output gain adjustemnt
AC Fuse
200 - 240 VAC power input
Front panel
Rear panel

7
3
610.503C
Rev.1
Start-up of the equipment (via MasterSwitch software)
3
2
4
Connect GD-1000 to the power supply (230VAC)
Connect USB to PC (cable supplied)
Press the POWER button
lights up. The PC will automatically recognise it as the "GMP"
storage device.
Press the blue PROGRAM / FILE mode button until the "FILE" LED
Follow the instructions before
5In the "GMP" device (internal SD card) you will find drivers for GD-1000 (program
mode), manuals and Masterswitch software installation program. We recommend
copying the files to the PC for installation.
The internal SD card contains all the audio files used by the GD-1000 for programmed events. It also
contains the evacuation messages which are 00017, 00018 and 00019.
In FILE mode it is possible to add, modify or delete audio files from the internal SD card. The audio file
name must be 5 numeric digits long.
To switch from FILE mode to PROGRAM mode, the internal SD card must
first be safely ejected from the PC.
NOTES
7
6
In FILE mode, in order to disconnect the USB cable from the GD-1000,
the internal SD card must first be safely ejected from the PC.
GD-1000

74
610.503A
Rev.1
GD-1000
GD-1000 connections
The system can be complemented with the NTP-1000 time synchronization module
NO PRIORITY
GD-1000 - AMPLIFIER
WITH PRIORITY
GD-1000 - AMPLIFIER
Line
100V
Line
100V
AMPLIFIER
AMPLIFIER
Opcional
REMOTE CONTROL

75
610.503A
Rev.1
GD-1000
Connection diagram
OPTION A
Connection between GD-1000 and WZ-1000A via D cable (RJ-45 / Euroblock)
OPTION B
Connection between GD-1000 and WZ-1000A via E cable (RJ-45 / RJ-45)
Switch nº6 ON
Switch nº6 ON
Line
100V
Line
100V
Line
100V
Line
100V
AMPLIFIER
MUSIC
MUSIC
SOURCE PA AMPLIFIER
AMPLIFIER
MUSIC
MUSIC
SOURCE PA AMPLIFIER

Connection diagram
76
610.503A
Rev.1
GD-1000
Connection of 2 or more GD-1000 together with 2 or more WZ-1000A with NTP-1000 time synchronization module
Line
100V
Line
100V
Switch nº6 ON
Switch nº6 ON
AMPLIFIER
MUSIC
MUSIC
SOURCE PA AMPLIFIER
B
G

77
610.503A
Rev.1
GD-1000
Wiring
Option A
Option B
Connect the shield to the
metallic part of the connector
Connect the shield to the
metallic part of the connector
Connect the shield to the
metallic part of the connector
Connect the shield to the
metallic part of the connector shieldshield
shield
shieldshield
shieldshield
Connection GD-1000 - GD-1000
Connection PZ-1000A - WZ-1000A
Connection GD-1000 - WZ-1000A
G
GD-1000 (1) GD-1000 (2)
Connection GD-1000 (1) - GD-1000 (2)
Connection NTP-1000 - GD-1000
Terminal block / Terminal block
Terminal block / Terminal block
Terminal block
The use of improper cables or their correct
placement may cause damage to equipment
that is not covered by the warranty.