UEBEX PLANELO User manual

Suspended Installation
PWB3x6 scew * 4pcs
1.Neccesaryaccessories
Expansion bolt * 4pcs Hanging wire *2pcs
2.Fix the hanging wires onto ceiling in order with expansion bolts
3.Fixing the other two ends of hanging wires on PLANELO with
PWB3X6, adjusting suitable distance between two ends to make
sure panel light is located in horizontal level safely.
4.Adjust the length of stainless wire to the suitable height
Recessed Installation with spring
4
2. Fix PMB3*6 screw on backboard of PLANELO as shown below:
1.Necessary accessories:
Spring
1.Take out the false ceiling block that are identical size
as PLANELO
2. Wiring driver and all other neccesary accessories
3.Fix PLANELO into right place, power on
Recessed Installation
4. Power on
Spring
Spring
5
3.Wiring driver and all other necessary accessories Fix
PLANELO
into right place with spring
Deck
Deck
U S E R M A N U A L
CONTENTS
IP20
Surfaced Installation-Accessories
Surfaced Installation
Foreword
Safety Warnings
1
1
2
3
3
4
4-5
Recessed Installation with spring
Recessed Installation
Suspended Installation
Product Parameter
Product Dimension
Recessed Installation with spring
5
Recessed Installation
Expansion bolt
Ceiling
Fix on the
backboard of PLANELO
PLANELO
Ceiling
Press the "dash area" and adjust the length of wire
Adjust same size of A and B,
fix with allen driver.
PWB3x6 scew * 4pcs
a
b
PLANELO PREMIUM
PLANELO
PLANELO
PLANELO
PLANELO
Attention: Safety wire need to be installed to prevent PLANELO
from accidentally falling down.
(6 pcs. springs are recommended for PLANELO L=1195)

2
N
L
POWER
SUPPLY
PLANELO
POWER
SUPPLY
POWER
SUPPLY
L
N
L
N
L
N
Wiring of
Wiring of
Wiring of
N
L
DIM-
DIM+
POWER
SUPPLY
POWER
SUPPLY
POWER
SUPPLY
L
N
L
N
L
N
DIM+
DIM-
DIM+
DIM-
DIM+
DIM-
IN+
IN-
IN+
IN-
IN+
IN-
System Connection Diagram Foreword
Safety Warnings
In order to ensure a perfect quality of the product and a safe usage,
please kindly follow the instructions:
1. Before opening the package, please check if there’s damage or
defect during transportation, if damage occurs, please don’t use it
and inform your supplier immediately.
2. Should the product be found damaged in any way, please keep it
in package and contact your supplier in time.
3. Please do not attempt to use adamaged product.
4. The product should be installed, dismantled and maintained by a
qualified electrician; Suppliers don’t take charge of any problems or
damages that occur due to mishandling such as an operation not
permitted in this instruction.
5. Choose an install place where can withstand 10 times the weight of
the product to ensure a solid installation.
6. Wipe the frame with soft cloth dipped a little neutral detergent, be
sure not to use any sandpaper, polishing powder or alcohol,
gasoline and so on.
7. Don’t connect cables with powered-on; make sure a correct
connection and no short circuit checked with instrument before
powered-on.
8. Make sure NO extra force or stress on aluminum frame to
avoid deformation.
This instruction applies only to UEBEX PLANELO.
31
Product Parameter
Item Input voltage
/ Frequency
100-240 VAC
220-240 VAC
50HZ-60HZ
Power Net weight
Product Dimension(mm)
1195x295
1195x595
295x295
595x595
2.15 kg
2.15 kg
60W 4.30 kg
2.15 kg
38W
1.10 kg
22W
0.60 kg
18W
295
295
620x620
595x295
Cutout
(mm)
10
10
10
10
10
10
Thank you for choosing UEBEX PLANELO. We strongly recommend
you to read this instruction manual carefully before installation and
usage. Make sure you have completely understood the assembly
instruction so as to ensure the correct way to install our LED
Panel light PLANELO
PLANELO with non-dimmable driver
PLANELO with 1-10V dimmable driver
PLANELO with DALI driver
PLANELO
PLANELO
PLANELO
PLANELO
PLANELO
PLANELO 295x295
PLANELO 595x295
PLANELO 595x595
PLANELO 620x620
PLANELO 1195x295
PLANELO 195x595
38W
38W
PLANELO
PLANELO
PLANELO
275x275
575x275
575x575
595x595
1175x275
1175x575