Optional Accessories
10
9) UJK Technology Extension for Cast Iron Router Table
(Code 103551)
Made specifically for the UJK Technology Professional
Router Table,this extension provides vital extra support
when machining wide workpieces such as raised panels for
cupboard doors. It is 810mm in length, running along the
entire front edge of the table. Fixing is just a simple matter
of attaching a bracket on either side, on the underside of
the table using 3 cap-head screws per side.The extension
slides in and out of the brackets, on strong rectangular
section bars. Going from zero to 260mm, at its maximum,
it effectively gives you approximately 610mm from the
centre of the router cutter to the edge of the extension.
The top edge of the extension is a low friction material,
ensuring that your work glides smoothly.
10) UJK Technology Digital Height Gauge
(Code 103655)
The UJK Technology Digital Height Gauge is an
indispensable measuring tool for the accurate setting of
cutting depths, in particular router cutters and saw blades.
The body is cast iron, with machined feet that form a
reference surface. It is stable and can stand upright without
additional support. It is equally accurate both vertically and
horizontally.The horseshoe shaped body measures 54mm
between the legs with an internal height of 80mm.The
main feature is its highly accurate digital scale unit, with an
LCD screen offering a read-out in either metric or imperial.
The display has a resolution of 0.01mm or 0.001 inches.
The digital read-out tells you precisely how deep your saw
blade or router cutter is going to cut.With a measuring
speed of 1.5 milliseconds, it is somewhat faster than
making a guess with a ruler.You can zero the digital
read-out at any point, allowing relative adjustment. It is
particularly handy to hold the bar in contact with the blade
or cutter and gradually increase the cutter height until the
display reaches the desired depth.Used horizontally, you
can measure or adjust a router table fence relative to the
cutter.The UJK Technology Digital Height Gauge will also
measure a mortice to a depth of 99mm.
10) UJK Technology Precision Mitre Gauge & Fence
(Code 501281)
This mitre gauge system is made from 5mm steel plate and
features positive stops at 0°, 22.5°, 30°, 45°, 60°, 67.5° and
90°. Simple to adjust with a spring loaded plunger stop and
able to be set at any other angle between 0-90° as required.
The other main feature is a 458mm long anodised alloy
fence, fitted with an adjustable flip-over length stop.
This fence can be slid along the gauge body by releasing
two thumb screws.The 458mm bar can be fitted to a
standard 3/4”x 3/8” (19 x 9.5mm) table slot, the locking
washer can be removed if required.This mitre gauge will
improve accuracy when cross or mitre cutting on many
machines or router tables.
