Ultimate Support Sunken 6 User manual

Instructions for
Assembling the 24"Extensions
Featuring Sunken 6 Space Racks

Included Parts with the 6 Space Desktop Rack w/ 24” Ext - BOX 13 OR 14
Instructions for
Assembling the 24"Extensions
Featuring Sunken 6 Space Racks
6 Space Rack Rail x2
1/4 - 20 x 5/8"Pan Head Screw x14
Bottom and Top Board x2
Side Board - Left x1
Side Board - Right x1
Cam Pin x8
Cam Lock x8
Dowel Rod x8
24”Extension Table Top - Left OR Right x1
Long Rack Mount Bracket x2
Short Rack Mount Bracket - Right x1
Short Rack Mount Bracket - Left x1
Please check to see you have all parts before starting.
Once all parts are conrmed begin assembly.
970.776.1920 . www.ultimatesupport.com
Copyright 2017, Ultimate Support Systems . All Rights Reserved
OR

Additional Parts Needed from other boxes - BOX 1, 2 & 8
Assembled core table with legs (Instructions
for assembling core table and legs are
included in box 1 & 2) x1
1/4 - 20 x 5/8"Pan Head Screw (Included
with core table and side leg, box 1 & 8) x16
Assembled side leg (Instructions for
assembling side leg are included
in box 8) x1
Instructions for
Assembling the 24"Extensions
Featuring Sunken 6 Space Racks

Lay 24"extension face
down with holes facing up.
Place assembled side leg on
24"extension and line-up all
eight holes. Attached table
top and side leg together
with eight pan head screws
(1/4 - 20 x 5/8”).
Assembled
Side Leg
Pan Head Screws
(1/4 - 20 x 5/8")
24"Extension
Table Top - Left
Slide the 24"extension onto
the three dowel rods and
line-up holes with the two
brackets on the core table.
Use the eight pan head
screws (1/4 - 20 x 5/8") that
came with the core table
assembly (Box 1)
to attach 24"extension.
Core table
Brackets
Dowel Rods
Assembled Left 24"
Extension Table Top
Core Table
with Legs
Pan Head Screws
(1/4 - 20 x 5/8”)
8 included with Core
Table Assembly

Cam Pins
(4 Per Side Board)
Cam Lock
(4 Per Top and Bottom Board)
Arrow Pointing
Towards Edge
Pan Head Screws
(1/4 - 20 x 5/8”)
Side Board - Left
Top and Bottom Board
Dowel Rods
(4 Per Side Board)
Large
Screw
Size
Holes
12 Space Rack Rail
Screw cam pins into top
and bottom of side board.
Cam pins screw into inside
holes. Next push the dowel
rods into top and bottom
of side board using the
outside holes.
Line-up rack rail and side
board holes. Use two Pan
Head Screws (1/4 - 20 x
5/8") to attach. Use one
Screw at the top and
bottom.
Repeat above steps on the
opposite side board.
Lay Top and bottom board
with large holes facing up.
Push the four cam locks
into large holes on the top
and bottom board. The
arrow on the cam locks
should be pointing towards
the edge.
Page 2

Lay the left side board
down with the rack rail
facing up. Slide the top
and bottom board onto
dowel rods and cam pins.
On top and Bottom boards
make sure the cam locks
are facing the bottom of
the left side board.
Slide the right side board
into the top and bottom
boards. Place screw driver
into cam lock and turn
clockwise to lock cam pins
in place (12 Total).
NOTE:
If boards are not sliding
into place, check cam
locks. You may need
to turn them counter
clockwise for cam pin to
fall into place, then turn
clockwise to lock into
place.
Attach the short left and
right rack mount brackets
to the sides of the 6 space
rack cabinet with four pan
head screws (1/4 - 20 x
5/8"). Attach the long rack
mount bracket to the top of
the 6 space rack cabinet.
Use three more pan head
screws (1/4 - 20 x 5/8") to
attach.
Repeat above steps for the
other 6 space rack cabinet.
Top
Board
Bottom
Board
Right Side
Board
Left Side
Board
Rack Rail
Short Rack Mount
Bracket (Left)
Long Rack Mount
Bracket
Short Rack Mount
Bracket (Right)
6 Space Rack
Cabinet Assembled
Cam Locks
Cam Locks
Cam Pins &
Dowel Rods
Cam Pins &
Dowel Rods
Pan Head Screws
(1/4 - 20 x 5/8")

Place 6 space cabinet
through opening on 24”
extension. Rack mount
brackets will rest on top of
24"extension table top.
Secure the 6 space
rack cabinet to the 24"
extension table top by
attaching long rack mount
bracket and 3 Pan head
screws (1/4 - 20 x 5/8").
Screws attach to 6 space
rack cabinet only.
24"Extension
Table Top
24"Extension
Table Top
6 Space Rack
Cabinet Assembled
6 Space Rack
Cabinet Assembled
Long Rack Mount
Bracket
Pan Head Screws
(1/4 - 20 x 5/8")