Ultimate Support BOX 4 User manual

Included Parts with the Second Tier - BOX 4
Instructions for
Assembling Second Tier
Additional Parts Needed from other boxes - BOX 1 & 2
2nd Tier Platform x1
2nd Tier Mounting Bracket x2
1/4 - 20 x 5/8"Pan Head Screw x28
Assembled core table with legs (Instructions
for assembling core table and legs are
included in box 1 & 2) x1
Please check to see you have all parts before
starting. Once all parts are conrmed begin assembly.
970.776.1920 . www.ultimatesupport.com
Copyright 2017, Ultimate Support Systems . All Rights Reserved

Stand up core desk. Line-up
2nd tier mounting bracket
holes with core desk holes.
Use eight pan head screws
for each bracket bottom.
Place 2nd Tier Platform on
top of attached 2nd tier
bracket and line-up holes.
Use six pan head screws for
each bracket top.
NOTE:
If attaching the four space
rack, back off all 2nd tier
bracket screws a quarter turn
from tight. Then slide the
assembled four space rack
between top tier and main
desk surface. See instruction
10 for more details.
Pan Head Screws
(8 for each bracket bottom)
Pan Head Screws
(6 for each bracket Top)
2nd Tier Mounting Bracket
Bracket web is
on top and facing
away from desk.
2nd Tier Platform