2.BOOSTER SYSTEM DIAGRAM
Tower
Outdoor
Coax Cable
Indoor
Signal
Booster
One-Way Signal Booster Indoor Antenna (Omni-Directional Antenna)
Coaxial Cable
(connecting Booster to outdoor antenna
)
Outdoor Directional Antenna*
Coaxial Cable
(connecting Booster to indoor antenna)
3.BOOSTER HIGH / LOW GAIN SWITCH DIAGRAM
Initial Setup- Booster High / Low Gain Setting Configuration:
1. After installation, you may adjust the Booster settings using the “Gain Switch”. Configure switch
as outlined above according to your frequency band(s) and desired gain setting.
2. The above diagram outlines available switch positions for Low & High-Power gain in supported
frequencies.
3. To expand the indoor signal coverage area, position the switch to the High-Power gain setting.
Important Note: If the receiving range decreases when Booster is setto High gain there is signal
interference in the area. To correct, change setting to Low Gain.
www.Unication.com