Uniden G37 Series User manual

G3700/G3700L
Accessory Camera for G37xx Series
VIDEO SURVEILLANCE SYSTEMS
For more exciting new products please visit our website:
Australia: www.uniden.com.au
OWNER’S MANUAL

IMPORTANT SAFETY INSTRUCTIONS
This manual contains important information about this product’s operation. If
you are installing this product for others, you must leave this manual or a copy
with the end user.
When using your equipment, always follow basic safety precautions to reduce
the risk of fire, electric shock and injury to persons, including the following:
• This equipment is NOT waterproof. DO NOT expose it to rain or
moisture (for the weatherproof video camera: DO NOT expose it to
excessive water or moisture).
• DO NOT immerse any part of the product in water. Do not use this product
near water, e.g., near a bathtub, wash bowl, kitchen sink or laundry tub, in
a wet basement or near a swimming pool.
• To avoid any risk of electric shock from lightning, avoid handling any
electronic devices (except battery powered ones) during an electrical
storm.
• Use only the power cord and/or batteries indicated in this manual. Never
dispose of any batteries in a fire: they may explode. Check with local codes
for possible special disposal instructions.
• Never tug or pull on any power cord: be sure to leave some slack in the
cord when placing your equipment, and always use the plug to unplug cord
from the wall outlet.
• Never leave power cords where they can become crushed, cut, or frayed;
when running power cords, avoid letting them rub against any sharp edges
or lie across any high traffic areas where people might trip over them.
• Do not use the device if the adaptor cords or plugs have been damaged,
the unit has been exposed to liquids, or the unit has been dropped or is
damaged.
2

Failure to follow these warnings and the assembly instructions could result in
serious injury or death. This product is not designed or intended for use as a
medical monitor, nor should this product be used as a substitution for medical
or parental supervision. Always be sure that both the transmitter and receiver
are working properly, and are within range of each other.
STRANGULATION HAZARD. Keep the adapter cords out of the reach of
children.
WARNING: KEEP OUT OF THE REACH OF CHILDREN.
Allow for proper ventilation when units are in use. Do not cover the camera
or receiver with any object such as a blanket. Do not place it in a drawer or in
any location which would muffle the sound or interfere with the normal flow of
air.
Warning to Parents and Other Users
To avoid damage to your equipment, follow these simple precautions:
• Do not drop, puncture or disassemble any part of the equipment. There are
no user-serviceable parts inside.
• Do not expose the equipment to high temperatures, and avoid leaving the
equipment in direct sunlight for more than a few minutes. Heat can damage
the case or electrical parts.
• Do not place heavy items on top of the equipment or expose the equipment
to heavy pressure.
• Remove the power adaptor during long periods between usages.
• Clean only with a dry cloth.
Failure to follow the instructions in this operating manual will void the
warranty. Uniden assumes no liability for damages to property or injury
to persons caused by improper handling or failure to comply with these
safety instructions.
SAVE THESE INSTRUCTIONS!
For best results
3

WHAT’S IN THE BOX?
• Digital Wireless Camera with stand
• AC Adapter for Camera
• Mounting screws and anchors
• Owner’s Manual
• If any item is missing or damaged, contact your place of purchase
immediately. Never use damaged products!
• Need help? Get answers at our website:
www.uniden.com.au for Australian model.
G3700 G3700L
1
2
3
4
56
7
8
9
1
6
5
3
7
9
2
8
BASIC OPERATION
4

No. What it is
1 Camera Antenna: Sends and receives signals to/from the monitor.
2 IR LEDs. Infrared LEDs provide viewing in low/ no light conditions.
3 Camera Lens: Catches the video in front of the lens and transmits video
from camera to monitor.
4 Light Sensor: Sense brightness for changing between daytime and
nighttime vision
5 Microphone: Transmit audio to monitor.
6 Pair Button: The pair button is located on the front (rear for G3700L) of
the camera. It is used to pair the camera with monitor.
7 PIR Sensor: Detects motion in front of the lens and emits detection signal
to transmitter.
8 6 white LEDs turn on when motion is detected or when a preset time
range begins
9 Speaker (at the bottom of the camera): Produces the sound transmitted
from the monitor.
SET UP THE G3700 / G3700L
Pair the camera to the monitor before you install it. Once the camera is paired,
the monitor displays live video from it. This live video will help you position the
camera for the best viewing angle.
Tap the following icons as they
appear on the monitor screens:
This screen should display:
1. Tap
Pairing
on the
Camera Setup
screen.
2. Tap the channel number you want to pair the camera to.
3. A message displays with instructions to press the
PAIR
button on the camera.
A 30 seconds countdown begins. Press and release the
PAIR
button on the
back of the camera.
#You must press the PAIR button on the back of the camera during the 30
seconds countdown; otherwise, the camera will not be paired.
4. The system displays live video 3 seconds after the camera is successfully
paired.
5

When you are positioning the camera, bring the monitor along; it’s much
easiertondthebestviewinganglewhenyouhavethedisplayhandy.
#The monitor’s battery will last about 1.5 hours on its own.
1. Position the camera where you want it, plug it into power, and check video
on the monitor. Move the camera if the view is not what you want.
2. Hold the base of the camera stand where you want to mount it and mark the
location of the screw holes.
3. Use the included screws and anchors to attach the base to the wall or
ceiling.
4. Tug gently on the stand to make sure it is securely in place.
SET G3700L PARAMETERS
The
Light Settings
on the main screen tab lets you:
• Set how long the light will be on once it is activated
• Set a timer for the light to be on during a specified time period
• Dim the light intensity
INSTALLING THE G3700 / G3700L
6

Duration
The Duration option allows you to set the length of time the light
stays on after it is triggered. Options are 1, 3, or 10 minutes, or Off.
Timer
The Timer option lets you set a start and end time for the light camera
to turn itself on and off.
Dimmer
The Dimmer option lets you set how strong the LED lights will display.
Options are 25%, 50%, 75%, and 100%.
7

SPECIFICATIONS
G3700CameraSpecications
Image Sensor 1/2.7 inch Color CMOS Image Sensor
Effective Pixel Area 1920 x 1080
Image Processing Format H.264
Image Resolution / Frame
Rate 1080P up to 10fps / 720P up to 24fps
Lens 3.6mm F1.9
Low Light Resolution 1-8 lux
Low Light Solution 16 IR LEDs, 1 low light sensor
Night Vision Up to 12 meters
IRcutlter Yes
Viewing Angle 101°
Automatic Gain Control Auto
Automatic Electric Shutter
(AES) Speed 1/30~1/1000 Second
White Balance Auto
Power Requirement 9V 0.6 DC A
Power Consumption Max 5.4W
Operating Temperature
Range -10° C to +50° C
Operating Humidity Range 0 ~ 85%
Environment Rating IP65
Camera Housing Material Plastic
8

G3700LCameraSpecications
Image Sensor 1/2.7 inch Color CMOS Image Sensor
Effective Pixel Area 1920 x 1080
Image Processing Format H.264
Image Resolution / Frame
Rate 1080P up to 10fps / 720P up to 24fps
Lens 3.6mm / F1.8
Night Vision Up to 12 meters
IRcutlter Yes
Viewing Angle 92°
Automatic Gain Control Auto
Automatic Electric Shutter
(AES) Speed 1/30~1/1000 Second
White Balance Auto
Power Requirement 9V 2A DC
Power Consumption Max 18W
Operating Temperature
Range -10° C to +50° C
Operating Humidity Range 0 ~ 85%
Environment Rating IP65
Camera Housing Material Metal
9

ONEYEAR LIMITED WARRANTY
IMPORTANT Satisfactory evidence of the original purchase is required for
warranty service.Please refer to our Uniden website for any details or warranty
durations offered in addition to those contained below.
Warrantor
The warrantor is Uniden Australia Pty Limited ABN 58 001 865 498
(“Uniden Aust”) .
Terms of Warranty
Uniden Aust warrants to the original retail purchaser only that the G3700 and
G3700L (“the Product”), will be free from defects in materials and craftsmanship for
the duration of the warranty period, subject to the limitations and exclusions set out
below.
Warranty Period
This warranty to the original retail purchaser is only valid in the original country of
purchase for a Product first purchased either in Australia or New Zealand and will
expire one (1) year from the date of the original retail sale.
If a warranty claim is made, this warranty will not apply if the Product is found by
Uniden to be:
(A) Damaged or not maintained in a reasonable manner or as recommended in the
relevant Uniden Owner’s Manual;
(B) Modified, altered or used as part of any conversion kits, subassemblies or any
configurations not sold by Uniden Aust;
(C) Improperly installed contrary to instructions contained in the relevant Owner’s
Manual
(D) Repaired by someone other than an authorized Uniden Repair Agent in relation
to a defect or malfunction covered by this warranty; or
(E) Used in conjunction with any equipment, parts or a system not manufactured by
Uniden.
Parts Covered
This warranty covers the Product and included accessories.
User-generated Data
This warranty does not cover any claimed loss of or damage to user-generated data
(including but without limitation phone numbers, addresses and images) that may
be stored on your Product.
G3700 / G3700L
9

Statement of Remedy
If the Product is found not to conform to this warranty as stated above, the Warrantor,
at its discretion, will either repair the defect or replace the Product without any
charge for parts or service. This warranty does not include any reimbursement or
payment of any consequential damages claimed to arise from a Product’s failure to
comply with the warranty.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
for compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
This warranty is in addition to and sits alongside your rights under either the
COMPETITION AND CONSUMER ACT 2010 (Australia) or the CONSUMER GUARANTEES
ACT (New Zealand) as the case may be, none of which can be excluded.
Procedure for Obtaining Warranty Service
Depending on the country in which the Product was first purchased, if you believe that
your Product does not conform with this warranty, you should deliver the Product,
together with satisfactory evidence of your original purchase (such as a legible copy
of the sales docket) to Uniden. Please refer to the Uniden website for address details.
You should contact Uniden regarding any compensation that may be payable for
your expenses incurred in making a warranty claim. Prior to delivery, we recommend
that you make a backup copy of any phone numbers, images or other data stored on
your Product, in case it is lost or damaged during warranty service.
UNIDEN AUSTRALIA PTY LTD
Phone number: 1300 366 895
10

©2016 Uniden Australia Pty Ltd
Printed in PRC
Other manuals for G37 Series
1
This manual suits for next models
2
Table of contents
Other Uniden Camera Accessories manuals