Unique Perspectives Point-It! User manual

Unique Perspectives Ltd.
www.click2go.ie ● in[email protected]
Ballyline ● Callan ● Co. Kilkenny ● Ireland
Phone: [phone] ● Fax: [phone]
Page 1 of 4
October 2004
Quick Guide
New options and improvements to the Point-It! joystick
Light Action Version
A light action version of the joystick is now
available requiring only 250grams of pressure
for a full scale deflection of the joystick
compared to the 550grams of pressure for the
standard joystick.
Knob Options
A range of new knob alternatives are now
available for the Point-It! joystick including
Chin, Sponge, Carrot, DX, Wrist plate, T-Bar
and more.
These knobs are only inter-changeable with
the Ball Knob version of the Point-It! joystick.
Left Button
Double Click
Left
Button
Right
Button
Mouse Speed
(remembered
when off)
Joystick Knob
and Left Button
Right
button
switch
input.
Left button switch
input (also
disables switch
on knob).
Hold down any left
button for 5 seconds to
enable left drag lock.
The joystick will beep.
After dragging the
object press left button
again to disable drag.

Unique Perspectives Ltd.
www.click2go.ie ● in[email protected]
Ballyline ● Callan ● Co. Kilkenny ● Ireland
Phone: [phone] ● Fax: [phone]
Page 2 of 4
October 2004
ORDER CODES
#301-USB
Point-It! USB Joystick
#301-BALL-USB
Point-It! USB Joystick with interchangeable ball knob
#301-USB-L
Point-It! USB Light Action Joystick
#301-BALL-USB-L
Point-It! USB Light Action Joystick with interchangeable ball knob
K-Ca
Carrot Knob
K-Q
Dynamic Knob
K-Ch
Chin Knob
K-Sp
Sponge Knob
K-Tbar
T bar
K-Wr
Wrist Plate
PS2 versions are still available by replacing “USB” with “PS2” in the order code.

Unique Perspectives Ltd.
www.click2go.ie ● in[email protected]
Ballyline ● Callan ● Co. Kilkenny ● Ireland
Phone: [phone] ● Fax: [phone]
Page 3 of 4
October 2004
Point-It! USB Hardware Installation –Windows XP
Windows will automatically detect when you plug the Point-It joystick into the
USB port of your computer. If the Human Interface Device driver necessary to
run USB pointing devices is not installed then Windows will run the “Found
New Hardware Wizard”
Click on “Install the software automatically” and then click “Next”. Windows
will automatically install the Human Interface Device (HID) driver.
Click “Finish” to finish installing the driver. The Point-It! Joystick is now ready
for use.

Unique Perspectives Ltd.
www.click2go.ie ● in[email protected]
Ballyline ● Callan ● Co. Kilkenny ● Ireland
Phone: [phone] ● Fax: [phone]
Page 4 of 4
October 2004
Point-It! USB Mouse Properties –Windows XP
In Windows XP Microsoft have introduced the “Enhance pointer precision”
option in Mouse Properties. However, to get the smoothest response from
your Point-It! joystick this option should be disabled.
To disable the “Enhance pointer precision” option
1. From the “Start” menu choose “Control Panel” and then click on
“Printers and Other Hardware”.
3. Click on the “Pointer Options” tab.
2. Click on “Mouse”.
4. Click on the “Enhance pointer
precision” checkbox to disable this option
and then click “OK”.