UNITED UWM-8103 Owner's manual

2
1
QUICK USER MANUAL
1
6
3
4
5
2
DESCRIPTION OF
THE MACHINE
WASHING
1- Upper Tray
2- Detergent Drawer
3- Programme Knob
4- Display Panel
5- Door
6- Pump Filter Cover
• Connect the washing machine to a power
socket.
• Open the water supply.
Separate your laundry according to type
(cotton, synthetic, sensitive,woollen, etc.),
their temperatures (cold, 30°, 40°, 60°, 90°) and
degree of contamination (slightly stained, stained,
highly stained).
Preparing Your Laundry
Placing Laundry Into
The Washing Machine
3Putting Detergent Into
The Washing Machine
4Programme Selection
Open the door of your
machine. Spread your
laundry evenly in the
drum.
2 1
3
1- Pre-washing
compartment
2- Main washing
compartment
3- Softener compartment
Use the control knob to select the required
programme. The knob can be rotated left or right
to select the program. Ensure that the programme
knob is exactly on the programme you want to
select. Note: Read the user manual for detailed
information. (*) Washing programs and names may vary
depending on your machine model.
Coon 90°C
Coon
60°C
40°C
Coon
Coon
Eco 20°C
Easy Care
Wool
*Rapid 12' / Rapid 15'
Daily 60'
Shirts
Mix 30°C
Sport
Hand Wash
Delicate
Spin
Rinse

QUICK USER MANUAL
5Display Panel (*)
6Operating Your Machine 7Removing Laundry
On the display panel, you can see the washing delay timer of your machine, temperature selection of your
machine, the auxiliary functions you have selected and the stage of the programme you are running on your
machine ( pre wash / wash state, rinsing stage, wringing stage).
The display panel will not only warn you with LED combinations that would flash on its indicators when an error
is simultaneously occurred on your machine, but also reports you that the washing program is finished by the
appearance of ‘Finish LED’ on its indicator when the washing program you selected is ended.
96 7 8
11
5
1
2
3
4
1- Wash
2- Rinse
3- Spinning
4- Finished
5- Delayed start auxiliary function
6- Temperature selection adjustment
7- Auxiliary Function Button 1
8- Auxiliary Function Button 2
9- Start/Pause Button
10- Additional Function Leds
11- Display Panel
(*) Auxiliary functions vary depending on the model of your machine.
By pressing on Start/Pause button, you
may start the programme you have
selected, suspend a running programme.
- After a program is
completed, the washing
machine will turn off
automatically.
- End led will blink on the
display panel.
10
8Maintenance
1- It is recommended that you clean your pump filter once
every 2 months.
2- It is recommended that you clean your detergent drawer
once every 2 months.
3- It is recommended that you clean the filter on your water
inlet valve once every 2 months.
4- Clean the filter at the end of the valve every 2 months.
If the washing machine does
not spin, the unbalanced
load system may have been
activated.
The unbalance load control
system will try to distribute
your laundry evenly to
prevent damage to the drum.
The spinning operation will
resume once the load has
been evenly distributed.
52261511