UNITY LAUNDRY SYSTEMS UTS40B User manual

®/™ ©2021 Unity Laundry Systems. All rights reserved.
ON-PREMISE LAUNDRY
HIGH EFFICIENCY SOFT MOUNT
WASHER EXTRACTOR
UNITY LAUNDRY SYSTEMS
MODEL UTS40B
Convenient Manual Dispenser
with an easy to ush design and four compartments: pre-wash and
main wash (powder or liquid), bleach and fabric softener (liquid only)
Perfectly Tuned
Extract Performance
with optimally
designed RPMs and
G-forces to achieve
max extraction and to
prevent unbalanced
loads
Easy Access Front Panel
for front servicing of the drain and
other key components
Before We Ship
we perform a double quality
check to ensure that each
washer is perfect right out of
the box
Built For A Long Life
including a stainless-steel drum
and tub, high quality bearings,
UL certied critical components,
a durable motor and the ETL
mark of quality
Easy To Use Controls
with an intuitive design and
multi-lingual support
Easy Installation
No concrete pad required -
just drop in place
5 Chemical Injection
Ports
for compatibility with
any external
automatic chemical
dosing system
Emergency Stop
for operator safety

12
PROGRAMMABLE CYCLES
Ciclos Programables
START
Arranque
3
Load items in washer and close door
Cargue los artículos en la lavadora y cierre la puerta
Select wash cycle
Seleccione el ciclo de lavado
Press start button
Presione el botón de arranque
INSTRUCTIONS
Instrucciones
1
3
2
See specic instructions for proper installation. Because of continuous product improvement,
Unity Laundry Systems reserves the right to change specications without notice.
®/™ ©2021 Unity Laundry Systems. All rights reserved.
MANUAL DETERGENT
DISPENSER
SIMPLE DIGITAL CONTROLLER
Easy to use control panel –
bi-lingual instructions
Convenient and easy to use
Pre-wash Main Wash
DETERGENT
Liquid
SOFTENER
Liquid
BLEACH
MOTOR
Size – HP (KW) 2.4 (1.8)
CAPACITY
Cylinder Volume – cu. ft. (liters) 5.5 (155.7)
Cylinder Diameter – in. (mm) 25.9 (658.6)
Cylinder Depth – in. (mm) 18.0 (457.2)
Dry Load Capacity – lb. (kg) 40 (18.1)
OPERATING SPEED & EXTRACT FORCE
Washing Speed (RPM) 45-50
Maximum Extract Force (G-force) 300
Maximum Extract Speed (RPM) 900
CONNECTIVITY
USB Programmability Yes
DIMENSIONS
Depth – in. (mm) 34.0 (865)
Width – in. (mm) 34.6 (880)
Height – in. (mm) 51.1(1,300)
CRATED DIMENSIONS
Width – in. (mm) 37.8 (960)
Depth – in. (mm) 37.8 (960)
Height – in. (mm) 60 (1,524)
APPROXIMATE WEIGHT
Uncrated – lb. (kg) 661.3 (300)
Crated – lb. (kg) 705.4 (320)
ELECTRICAL CONNECTION OPTIONS (VOLTS/Hz/PHASE)
208 – 240V / 50 – 60HZ / 1PH (no electrical heating) Yes
WATER HEATING OPTIONS
Hot / Cold Water Connections Only Yes
WATER, CHEMICAL DISPENSING, DRAINS
Number of Water Inlets 3
Inlet Sizes – in. (mm) 3/4 (19.0)
Manual Dispenser Compartments, Number 4
External Chemical Connections, Number 5
Dump Valve Drain Size – in. (mm) 2 (51)
INSTALLATION RECOMMENDATIONS
Recommended Clearance Between Machines - in (mm) 1.5 (40)
Recommended Clearance in front of Machines - in (mm) 39.4 (1000)
Recommended Clearance Behind Machines - in (mm) 31.5 (800)