URBAN OUTFITTERS WIATT SCONCE 81289886 User manual

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 1 of 2
WIATT SCONCE
Assembly Instructions
TOOLS REQUIRED BUT NOTINCLUDED:
Phillips Screwdriver, Tape measure, Pencil
WARNINGS:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air
conditioning vents. Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
PARTS INCLUDED
B) Screws
[M4x25mm] x2
A) Anchors x2
D) Shade E) Socket Ring
C) Lamp Body
URBAN OUTFITTERS

WIATT SCONCE
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
Page 2 of 2
STEP 1: Located the desired position of the sconce on the wall and mark the position through the keyholes in the back
of the sconce. Ensure the sconce is level before marking the holes on the wall.
STEP 2: Contact your local hardware store for the correctanchors for your wall-type.
STEP 3:Secure the two anchors (A) into the wall, insert two screws(B) into anchors (A) and attach body(C) onto the
wall.
STEP 4:Put the lamp shade (D) onto the lamp body and then secure with socket ring (E).
STEP 5: Plug into outlet, turn on switch, and enjoy your new lamp
Use a 60W (MAX) Type A incandescent bulb or a 10W CFL bulb. Do not use bulb that exceeds recommended
wattage.
URBAN OUTFITTERS