4
Safety Precautions
Please read these instructions and safety precautions carefully before
using your Titan SE product for the first time!
Do not place any magnetic objects in the vicinity of the cutting head; otherwise uniform
contact pressure is not ensured.
Do not remove the connection cable to the computer while plotting is in progress.
Relieve the pressure on the pressure rollers when not in use by moving the pressure
lever up.
Do not reach into the unit with your hands when the power is connected.
Never open the housing or attempt to modify the unit yourself.
Ensure that liquids and metal objects do not get into the inside of the cutter.
Ensure that the wall socket used is grounded and protected with a ground fault switch.
Ensure that the connected voltage (110V) does not deviate by more than ±10%.
Otherwise install a voltage stabilizer.
