usha HB 3730 User manual

Instruction Manual
HAND BLENDER
HB 3730 / HB 3731

2 Hand Blender
Dear Customer,
Congratulations!
Thank you for purchasing your new USHA Hand Blender.
We recommend that you spend some time reading this instruction manual in order to
fully understand all the operational features it oers.
Read all the safety instructions carefully before use and keep this instruction manual for
future reference.
Best Wishes

Hand Blender 3
CONTENTS
Know Your Hand Blender
Description of Parts ............................................................................................................................. 4
Safety Instructions
Important Safeguards ......................................................................................................................... 5
Operate Usha Hand Blender
Using your Hand Blender ................................................................................................................... 6
Care and Cleaning .............................................................................................................................. 7
Miscellaneous
Trouble Shooting .................................................................................................................................. 7
Technical Specications ..................................................................................................................... 8
Warranty Card ...................................................................................................................................... 10

Hand Blender 4
KNOW YOUR HAND BLENDER
DESCRIPTION OF PARTS
1. Top Cover
2. Switch Button
3. Power Handle
4. Blender Shaft (Detachable) HB 3730 / HB 3731
5. Power Cord
6. Beaker (Only for HB 3731)
7. Blade
1
2
3
4
7
5
6

5 Hand Blender
IMPORTANT SAFEGUARDS
Before using the electrical appliance, the
following basic precautions should always
be followed including the following:
1. Read all instructions carefully before you
use the appliance.
2. Before use, check that the voltage of wall
outlet corresponds to the one shown on the
appliance rating plate.
3. Do not operate any appliance with a
damaged cord or plug or after the
appliance malfunctions, or is damaged in
any manner. If the supply cord is damaged
it must be replaced by the manufacturer or
an authorized service agent or a qualied
technician in order to avoid a hazard.
4. Unplug from outlet when not in use, before
putting on or taking moving component,
and before cleaning.
5. Do not let cord hang over edge of table or
hot surface.
6. Do not immerse upper part of blender in
water or other liquid or let the cord or plug
get wet, you could get an electric shock.
7. Do not operate the blender with wet hands
8. Ensure ngers are kept well away from
moving parts. Keep hands out of container
while blending to reduce the risk of severe
injury to persons or damage to the blender.
A scraper may be used but only when the
blender is not running.
9. The use of accessory not recommended by
the manufacturer may cause injuries to
persons.
10. Do not operate the appliance for other than
its intended use.
11. Do not use outdoors.
12. Take care if hot liquid is poured into the
blender as it can be ejected out of the
appliance/container due to a sudden
steaming.
13. Do not blend or mix hot oil, fat.
14. Do not touch the blades while the machine
is plugged in.
15. Do not add ingredients to the beaker while
the hand blender is operating.
16. Do not continuously operate the blender
too long. The motor may overheat. If the
surface of the hand blender has become
very hot, it may need time to cool down.
17. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
18. Close supervision is needed if the appliance
is used by or near children.
19. Switch o the appliance and disconnect
from supply before changing accessories or
approaching parts that move in use.
SAFETY INSTRUCTIONS

USING YOUR HAND BLENDER
IMPORTANT: Ensure that the stick blender is unplugged from the power outlet before assembling
or removing attachments.
• Clean the blender shaft and beaker.
• Fit the power handle inside the blender shaft, turn and lock until you hear a slight click. The marks
on the power handle and blender shaft should now be aligned with each other. If this is the case,
the blender shaft is locked correctly.
• Check if the power cord is not damaged.
• Make sure your electricity supply is the same as the one shown on the rating plate.
• Fill the food to the beaker (not more than the maximum indicated level) or a suitable container.
• Plug in, hold the power handle steady. Switch the appliance on by pressing the switch button.
• Immerse the blade guard completely in the ingredients.
• Blend the ingredients by moving the appliance slowly up and down and in circles.
• After you have completed blending, Release the switch button, then unplug from outlet.
WARNING:
Never blend hot oil, fat or meat.
Note: The continuous operating time without the load must be less than 15 seconds when using
blender. Max operation duration under high speed per time cannot exceed 1minute. Minimum 10
minutes rest time shall be maintained between two continuous cycles.
• If your blender gets blocked, rst stop and unplug before clearing.
• After use, unplug and dismantle
• Always switch o and unplug before cleaning. Please refer to the instruction in the CARE AND
CLEANING.
Hand Blender 6
OPERATE USHA HAND BLENDER

7 Hand Blender
• Always switch o and unplug before cleaning.
• Take the attachments o.
• Don't touch the sharp blades.
CAUTION
Take care when cleaning the blades as they are extremely sharp.
Note: Do not clean any part of the blender in the dishwasher
CLEANING THE POWER HANDLE AND POWER CORD
• Wipe with a damp cloth, then dry.
• Never immerse in water or other liquid or use abrasives.
CLEANING THE BEAKER
• The beaker can be washed in water with cleaning agent.
• Wash and rinse thoroughly with water, then dry.
CLEANING THE BLENDER SHAFT
• The shaft can be washed in water with cleaning agent.
• Unplug, let it cool down.
• Wash and rinse thoroughly with water, then dry.
STORAGE
• Store in a cool, dry place with proper ventilation.
CARE AND CLEANING

Hand Blender 8
TROUBLESHOOTING
If your hand Blender malfunctions or fails to operate, check if the appliance is plugged in properly.
Try unplugging the hand blender and then plug it back. Other than the recommended cleaning, no
further user maintenance should be necessary. If for any reason your hand blender should require
repairs, do not try to x it yourself. Please contact your nearest company service centre or call our
toll free no. 1800 1033 111
MISCELLANEOUS
Model No. HB 3730 HB3731
Wattage 300 W
Input Power
Accessories
220 - 240V ~50Hz
Beaker (Only For HB 3731)
Note:
PRODUCT SPECIFICATIONS AND TECHNICAL DETAILS

This appliance is warranted for 2 year on
product against all manufacturing defects from
the date of sale. In the event of any complaint,
please contact Usha Care at:
Toll Free No. 1800 1033 111.
The warranty is valid only when:
1. The appliance has been installed, used and
maintained in accordance with the
instruction manual.
2. The warranty card and cash memo duly
signed by the authorized dealer are
presented with the complaint.
3. The appliance has not been opened or
tampered with, by any unauthorized person.
This warranty does not apply for:
1. Damages due to chipping, peeling, plating
and denting.
2. Breakage or damage to components made
out of Bakelite, Urea, ABS, SAN and such
plastic materials, rubber parts and cord.
3. Normal wear and tear of parts.
4. Damage resulting from accidents, mishan-
dling or negligence on part of the customer.
Hand Blender 9
WARRANTY CARD
Liability for consequential loss or damage is neither accepted nor implied.
S.No: DATE:
CASH MEMO:
DEALER’S NAME AND ADDRESS:
OWNER’S NAME & ADDRESS:

10 Hand Blender
NOTES