UTEPO UTP7201ER-POE User manual

Board Diagram
Please follow the following step
Please check the following items before installation. If any missing, please contact the
dealer.
Hangers
User Manual
PoE Ethernet Repeater 1 pcs
MIT 2 pcs
1 pcs
1)
damage the device;
2) Check if the network cable and other transmission line that will be used is occupied by other
device;
3) Use a network cable to connect PoE Ethernet repeater's POE IN port with PoE Ethernet
switch;
4) Use 2 network cables to connect 2 PoE IP camears with PoE Ethernet repeater's PoE output
port respectively
5) Check if the installation is correct and device is good, make sure all the connection is reliable
and power up the system;
6) Make sure the network is normal.
Please turn off the signal source and the device's power, installation with power on may
Installation Steps
It is a PoE Ethernet repeater, which uses advanced network cable drive and power supply
technology to extend 100M Ethernet signal to 300 meters, greatly extending the transmission
distance and providing PoE at the same time. It is widely used in security surveillance and
network project.
Feature
Provide 3x 10/100Mbps Ethernet ports, one PoE input port, two PoE output ports, which
can meet the requirements of local monitor, long distance transmission and PoE power
supply;
Use advanced net work cable drive technology, the longest distance up to 200m;
PoE power supply is compatible with End-Span and Mid-Span;
Meet standards of IEEE802. 3 10BASE-T, IEEE802. 3u 100BASE-TX, IEEE802. 3af/at;
Excellent circuit isolation protection, effectively improve product's lightning protection,
ESD and anti-interference ability;
Appearance and structure: solid and delicate, easily install on the wall and desktop;
Operation: plug and play, no setting required.
PoE
User Manual
Ethernet Repeater
Notice
12
Please use standard Cat 5e/6 cable to get the longest transmission distance！
PoE Ethernet Repeater
Instruction:
Right side
VerB1.2
CAT5e/6
PoE IP Camera
PoE Ethernet Repeater
PoE Ethernet Switch
100m
100m
PoE IP Camera
Left side
Output Port
PoE OUT PoE OUT
Output PortGrounding
Terminal
PoE IN
Input Port
Device must be connected with lightning protection grounding; otherwise protection level
will reduce; please use above No.20 wire to connect the grounding terminal.
Notice：
LED
Indicator
POE IN RJ45
POE OUT RJ45
Yellow
Green
Yellow
Green
Blink
/
Data connecting
/
Data connecting
On
PoE input
working
Cable
connecting
PoE output
working
Cable
connecting
Application

连接 接口
Specification
连接 接口
Item
Description
Power
Power Supply
PoE Power Supply
Consumption
＜3W
Ethernet Port
Ethernet Port
PoE IN Port:10/100Mbps, PoE Input Port
PoE OUT Port:10/100Mbps, PoE Output Port
Transmission Distance
100m
About the relationship between distance and power,
Please refer to table 1
Trnasmission Medium
Cat5e/6
PoE Protocol
Support IEEE802.3af, IEEE802.3at Protocol
PoE Mode
Compatible with End-Span and Mid-Span
Network
Switch
Network Standard
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX
Network Delay
＜20us
LED Status
Indicator
LED
PoE IN Port and PoE OUT Port: RJ45 yellow light indicates PoE
status; green light indicates data exchange
Protection
ESD
1a Contact Discharge Leve 3
1b Air Discharge Level 3
Per: IEC61000-4-2
Communication Lightning Protection
Per: IEC61000-4-5 Level 3
Environmental
Working Temperature
-40℃~75℃
Storage Temperature
-40 ~85℃℃
Humidity (Non-Condensing)
0~95%
Mechanical
Size (L×W×H)
103mm×82mm×25mm
Material
Aluminum
Color
Black
Weight
195g
连接 接口
Trouble Shooting
Please find the following solution when the device doesn't work
Please confirm if the installation is correct;
Please confirm if the RJ45 cable order is in accordance with the EIA/TIA568A or 568B industry
standards;
The maximum transmission distance depends on the signal source and cable quality, please do not
exceed the maximum transmission distance;
Please replace a failure device with a normal one to check if the device is broken;
If the problem still exist, please contact the factory.
34
Table 1: Relationship between Single Port power and distance, power divides equally
when dual ports work.
PoE Switch PoE Ethernet Repeater load
100m 1m
100m 100m
Picture 1:
PoE IN Side Distance(m)
PoE OUT Side Distance(m)
MAX. Load Power Supply(W)
100
1
22.5
100
100
20
PoE Ethernet Repeater
PoE Ethernet Repeater
PoE Switch load
PoE Ethernet Repeater
Description: The test data in table 1 gained through the test method in Picture 1.
Specification change will not be noticed