UTEPO UTP116PV-HD2 User manual

Features
2
1
8/16 Ports Power & HD Video UTP Transceiver
8/16 ports power & HD video UTP transceiver can transfer HD video and power in up to
300m through Cat5/5e/6 cable; it provides power(steady DC12V) for remote camera, meantime
return video signal. It supports HDCVI, HDTVI, AHD and analog video; each power channel has
over-current, Short circuit, over-temperature protection and over-current abnormal LED
indication; Small and delicate appearance is suitable for home, office, supermarket, hotel etc.
real time
Power & HD Video UTP Transceiver
(with steady DC12V to camera)
User Manual
8/16 Ports
Transfer video and power through one Cat5/5e/6 cable in real time;
HDCVI HDTVI AHD and 4 in 1 Compatible design;
Providing up to 12W ,steady DC12V each channel to camera;
Over-current、Short circuit、over-temperature protection and over-current abnormal
LED indication;
Excellent ESD protection.
、 、 analog video
Please check the following items before installation, if anything missing, please contact the
dealer .
Power & HD video UTP Transmission Server 1pc 1 pc
1ch Power & HD video UTP Transceiver 16pcs 8 pc
User manual 1pc 1 pc
Power adapter 2pcs 1 pc
Accesory 1 set 1 set
16 Ports 8 Ports
1) Please turn off the signal power and display device power before installation, installing
with power will damage the transmission equipment;
2) Use coax cable to connect DVR and Transceiver;
3) Use network cable to connect Transceiver and receiver;
4) Connect cameras with receiver;
5) Check if the installation is correct, equipment is in good condition, the connection is
stable, then power on the system;
6) Ensure the equipment powered on and work properly.
Please follow the installation steps as below:
VerB 1.0
Back board
Installation step
Application
HD Cameras
Power&HD Video UTP
Transmission Server
Power&HD Video
UTP Transmitter
8 ports Transceiver
Video&Power input
Front board
Back board
Video&Power input
8
Panel Diagram
Front board
16 ports Transceiver
Ground Video output Power input
Ground Video output Power input

连接接 口
Specification
连接接 口
Troubleshooting
4
Item
Parameter
Channel 8/16 Channels
Function
Transmission Distance Please refer to table 1 and2
Video Connector 8/16*BNC
UTP Cable Connector 8/16*RJ45
Compatibility
PAL,NTSC,SECAM
HDCVI/AHD/HDTVI
Signal Transmission
Band
0-70 MHZ
Interference Rejection
>60dB
Video
Properties
Surge Protection
2KV(different mode) 4KV(common mode)
Per:IEC61000-4-5
Protection
ESD
Contact Discharge:6KV
Air Discharge:8KV
IEC61000-4-2
Size(L W H)× × 430 ×44.5mmmm×83mm
Outer Shell Material Metal
Color
Black
Physical
Properties
N.W.
6kg
Operating Temperature
-10℃-
45℃
Storage Temperature -40℃-85℃
Environmental
Relative Humidity 0
%-
95% (non-condensing）
Specifications suject to change without notice.
If any trouble in installation, please follow these steps:
Check if the installation is following the manual;
Check if all connection is right, and if RJ45 is conformed with EIA/TIA568A;
Make sure cables are quality and the real distance not exceeds the allowed transmission
distance;
If yellow LED on the RJ45 port is lighting on individual channel, please cut off power supply
and unplug cable to check whether short circuit or power consumption overload;
Use normal working device to replace the failure one to check whether it is the problem of
device itself;
Please contact your vendor if trouble still exists.
Power Consumption Total<192W(each port< 12W)
8/16 Ports Power & HD Video UTP Transceiver
Table 1:
Instruction:
The test data in table 1 is required under lab environment ,In actual case, there maybe
some differences due to different cable and environment.
The relationship between power and distance(DC24V input)
0.95A
0.90A
0.86A
0.68A
0.67A
0.5A
0.5A
12V
100m
150m
200m
250m
300m
350m
400m
The relationship between signal source and distance
HDCVI
(720P)
HDCVI
(1080P)
HDTVI
(720P/1080P)
HDTVI 300W
AHD-L/M
(720P/960P)
AHD-H
(1080P)
Analog
Video
400m
200m
320m
320m
300m
300m
500m
Table 2:
I
L
V
Picture 1:
Server Load
V/C
L
Transmitter
8/16 Ports Power & HD Video UTP Transceiver