UTEPO UTP108PV-HD User manual

Panel Diagram
Features
2
1
8 Ports Power & HD Video UTP Transceiver
NO. Component Description
Power Supply Input
Power LED Indicate if power supply is normal
R J45
100V-240V/50-60Hz power input connector
4
1
2
3The green LED light on indicates working status
The yellow LED light on indicates over-current protection
8 ports power & HD video UTP transceiver can transfer HD video and power in up to
30 m through Cat5/5e/6 cable; it provides power for remote camera, meantime return video signal.
It supports HDCVI、HDTVI AHD and ; 8 ports power & HD video UTP transceiver
adopts high quality and high capacity AC-DC power supply; each power channel has over-
current、Short circuit、over-temperature protection and over-current abnormal LED indication; it
adopts composition extender design, which is easy for engineering installation; Small
and delicate appearance is suitable for home, office, supermarket, hotel etc.
real time
0
、 analog video
DB15-BNC 1
Power & HD Video UTP Transceiver
User Manual
8 Ports
Transfer video and power through one Cat5/5e/6 cable ;
HDCVI HDTVI AHD and 4 in 1 Compatible design;
High quality and high capacity AC-DC power supply, providing up to 12W for each
channel;
Over-current、Short circuit、over-temperature protection and over-current abnormal
LED indication;
Excellent ESD protection;
DB15-BNC composition extended kits, easy for engineering installation.
in real time
、 、 analog video
Power
DB15 Video Output
Please check the following items before installation, if anything missing, please contact the
dealer .
8 ports power & HD video UTP Transmission Sever 1pcs
DB15-BNC cable 1pcs
1ch Power & HD video UTP 8pcs
User manual 1pcs
Power Cord 1pcs
Transmitter
1) Please turn off the signal power and display device power before installation, installing
with power will damage the transmission equipment;
2) Use DB15-BNC cable to connect DVR and Transceiver;
3) Use network cable to connect Transceiver and receiver;
4) Connect cameras with receiver;
5) Check if the installation is correct, equipment is in good condition, the connection is
stable, then power on the system;
6) Ensure the equipment powered on and work properly.
Please follow the installation steps as below:
23 3
4
VerB 1.2
Front board
Back board
Application
10A
250V
LN
CCC
HD Cameras
LCD
DVR
10A
250V
LN
CCC
AC IN
Power&HD Video UTP
Server
Transmission
Power&HD Video
UTP Transmitter
Installation step

连接接口
Specification
连接接口
Troubleshooting
4
Item
Parameter
Channel 8 Channels
Function
Transmission Distance
Please refer to table 1 and 2
Video Connector 1*DB15
UTP Cable Connector 8*RJ45
Compatibility
PAL,NTSC,SECAM
HDCVI/AHD/HDTVI
Signal Transmission
Band
0-70 MHZ
Interference Rejection
>60dB
Video
Properties
Surge Protection
2KV(different mode) 4KV(common mode)
Per:IEC61000-4-5
Protection
ESD
Contact Discharge:6000V
Air Discharge:8000V
IEC61000-4-2
Size(L W H)× × 310 ×45mmmm×232mm
Outer Shell Material Iron Metal and plastic
Color Black
Physical
Properties
N.W.
1.41kg
Operating Temperature
-10℃-50℃
Storage Temperature -40℃-85℃
Environmental
Relative Humidity 0
%-
95% (non-condensing）
If any trouble in installation, please follow these steps:
Check if the installation is following the manual;
Check if all connection is right, and if RJ45 is conformed with EIA/TIA568A or 568B;
Make sure cables are quality and the real distance not exceeds the allowed transmission
distance;
If yellow LED on the RJ45 port is lighting on individual channel, please cut off power supply
and unplug cable to check whether short circuit or power consumption overload;
Use normal working device to replace the failure one to check whether it is the problem of
device itself;
Please contact your vendor if trouble still exists.
Power Consumption Total< 100W(each port< 12W)
8 Ports Power & HD Video UTP Transceiver
8 Ports Power & HD Video UTP Transceiver
Specification change will not be noticed
Table 1:
Instruction:
The test data in table 1 is required under lab environment ,In actual case, there
maybe some differences due to different cable and environment.
The relationship between power and distance
0.3A
0.5A
0.8A
1A
12V
150m
80m
55m
45m
9V
300m
160m
100m
80m
Table 2:
C
L
V
Picture 1:
Server Load
V/C
L
The relationship between signal source and distance
HDCVI
(720P)
HDCVI
(1080P)
HDTVI
(720P/1080P)
AHD-L/M
(720P/960P)
AHD-H
(1080P)
Analog
Video
200m
100m
150m
300m
150m
300m
Transmitter