1 - General
The monitor has a 17 "TFT display with
a resolution of 1280 x
1024 pixels
The connection to the PC takes place
via a VGA interface with 15-pin VGA
plug or via a DVI interface with DVI-I
Dual Link plug (24 + 1 pin) or the dis-
play port for the transmission of digital
image signals
Optionally, the monitor can be equipped
with a resistive touch screen The touch
has a USB interface
Monitor with 19“ Front Plate, RAL 9006
If the monitor is equipped without a touch, the display is protected against contact and contact
with moisture and aggressive substances through a glass There is a standard protective glass
and a visually anti-glare protective glass available
The monitor is available with a standard or stainless steel front plate and mounting bolts on the
back These two versions are intended for installation in a control cabinet or control panel The
front panel has a gasket The degree of protection is IP 65
The monitor with 19 "front panel has 4 mounting holes on both sides and is installed in a 19"
rack
Page
Monitor Back with standard front plate
and mounting bolts
The monitors have a standard 12 VDC
power supply and are supplied with an
external 230 VAC / 12 VDC power
supply All monitors are optional with a
supply voltage of 24 VDC or with an in-
ternal power supply of 230 VAC
available
