1 - General
The monitor has a 24"TFT display with
a resolution of 1920 x 1080 pixels.
The connection to the PC takes place
via a GA interface with 15-pin GA
plug or via a D I interface with D I-I
Dual Link plug (24 + 1 pin) or the dis-
play port for the transmission of digital
image signals.
Optionally, the monitor can be equipped
with a resistive touch screen. The touch
has a USB interface.
Monitor with stainless steel front plate
If the monitor is equipped without a touch, the display is protected against contact and contact
with moisture and aggressive substances through a glass. There is a standard protective glass
and a visually anti-glare protective glass available.
The monitor is available with a standard or stainless steel front plate and mounting bolts on the
back. These two versions are intended for installation in a control cabinet or control panel. The
front panel has a gasket. The degree of protection is IP 65.
Page 4
Monitor Back with standard front plate
and mounting olts
The monitors have a standard 12 DC
power supply and are supplied with an
external 230 AC / 12 DC power
supply. All monitors are optional with a
supply voltage of 24 DC or with an in-
ternal power supply of 230 AC
available.
