V-Sun BTGP-38KM User manual

User’s Manual of BTGP-38KM
Bluetooth GPS Data Logger
V1.0

User’s Manual of BTGP-38KM Bluetooth GPS Data Logger V1.0
2
I Instruction to Product
1. Summary
BTGP-38KM, a high-tech product combines the advanced Bluetooth technology
and GPS technology. Through, Bluetooth technology, you can receive and storage GPS
data through intelligent mobile phone, PDA, laptop and desktop. Can be used for
location、navigation、read the history of track records, and other applications
2. Feature
1. Very low electricity cost and work up to maximum 18.5 hours
2. High-sense, good-performance GPS chip, receiving 65 satellites simultaneously
3. Accord with Bluetooth 2.0 Specification CLASS 2
4. Support Bluetooth serial communication Profile (SPP Profile)
5. Compatible with li-battery and charger of Nokia mobile (e.g.N70)
6. 3 LED indicate statues of Bluetooth, GPS and recharging
7. Support the baud rate 9600bps in NMEA-0183 standard
8. Can store the equivalent of 300 hours history GPSS track information.
9. Small-size, humanized design, portable, cute appearance

User’s Manual of BTGP-38KM Bluetooth GPS Data Logger V1.0
3
3. Technical Index
General Index
Receivable frequency L1, 1575.42MHz
C/A code 1.023MHz
Channel 65
Sensibility
Search -151dBm
Track -160dBm
Precision
Location 7m CEP 90%，3m CEP 50%(SA OFF)
Velocity 0.1m/s
Location time
Hot startup 1s, average
Warm startup 35s, average
Cold startup 40s, average
Dynamic condition
Altitude Max 10 km
Horizontal speed Max 515m/s
Acceleration Max 4g

User’s Manual of BTGP-38KM Bluetooth GPS Data Logger V1.0
4
GPS protocol
NMEA-0183 ASIC protocol
Default NMEA GGA, GSA, GSV and RMC, (VTG, GLL and RMS optional)
9600bps baud rate, 8 data bits, 1 stop bit, no check bit
Bluetooth index
Bluetooth code V2.0+EDR
Emission power Class 2 (4dBm max)
Receiving sensibility -80dBm
Communication distance 10m typical (free space)
Profile Communication Profile Serial Port Profile (SPP)
Power consumption
Working current about 60mA average
Working voltage 3.7V～4.2V
Chargeable voltage 5.5V
Battery
Recharge time 2.5hrs typical
Working time about 18.5hrs, track after the charging is full
Environment
Working temperature -40℃to +85℃
Storage temperature -40℃to +150℃

User’s Manual of BTGP-38KM Bluetooth GPS Data Logger V1.0
5
II Hardware Features
1. Size: 72.8(L) x45.8 (W) x18.8 (H) mm
Wight：70g
2. Packing list
1.Mainunit 1
2.Chargeableli-battery 1
3.User’smanual 1
4. Home charger（or Car charger）1
3. Description
Powerbutton Powerjack
Blue LED, indicates the working status of Bluetooth
Green LED, indicating the working status of GPS
Red LED, indicating the working status of charging

User’s Manual of BTGP-38KM Bluetooth GPS Data Logger V1.0
6
4. LED status
LED Status Description
Three second a flash GPS position no fixed
Green LED One second a flash GPS position fixed
Fast flash indicates Bluetooth in stand-by mode
Blue LED Slow flash indicates Bluetooth in connection
Constant on Indicates: it is under charging
Red LED Off Charging is completed
III Operation Instruction
1. Load battery
Open the cover of battery door, and load the battery in right direction. Close the
battery door...
2. Charge
Plug the AC end of the charger into main power supply socket. Plug the DC
charger into the hole on the product. Then, the red LED turns on, indicating it is
charging. In about 2.5hr, red LED turns off and the charger is completed.
Note: To maximize the lifetime of the battery, please charge it continuously for at least
10 hr for the first time.
3. Bluetooth dongle
If there is no Bluetooth dongle, you need to buy Bluetooth dongle. When you
purchase Bluetooth dongle, the business will give you a Manual, be sure to read
carefully.

User’s Manual of BTGP-38KM Bluetooth GPS Data Logger V1.0
7
4. Set up wireless connection
When 38KM’s power is on, the green LED turns on, indicating the state of
location. Blue LED swiftly flashes, indicating that it enters to matching state.
Connect to Bluetooth with your computer's USB port, then, open the BlueSoleil
software (Simple to use the BlueSoleil software, you can view the Track Tagger’s
self-help documents; the details can view the BlueSoleil software’s self-help documents) on
the computer, then, you input search command on your Bluetooth device. When it is
searched out, select “BTGP-38DL” and then input the code”0000”, so that the
matching is complete.
Based on energy saving considerations, when used in the track of storage,
Bluetooth does not work, five minutes after the start-up did not establish a connection,
automatically go into standby status. When the Bluetooth connection to be established,
according to the short boot into the power key to matching state.

User’s Manual of BTGP-38KM Bluetooth GPS Data Logger V1.0
8
IV View the track records
1. First, install the Track Tagger software in the CD-ROM, and then open the Track
Tagger software, read the log, decompress the log file. (Track Tagger software, you
can view the help documents of the software)
2. Install the Google Earth software. (The software in the CD-ROM, if installed
Google Earth can omit this step)
3. Double-click the decompression of kml file, you can see the red curve track on the
Google Earth (Chart follows)