V7 SCREENSHARE PRO User manual

User Manual
SCREENSHARE PRO

1. Safety Warning
• Before using and operating this device, please read thoroughly and comply with the following precautions in order
to prevent accidents or device malfunctions
Operating Environment
• Do not charge or use the device in dusty or wet conditions, to prevent internal circuit failure. Keep the device away
from heat sources.
Safety Precaution for Children
• This device and its parts may contain some small components. Please keep the product out of reach of children to
prevent accidents.
Water Precaution
• This device is not water-resistant. Do not submerge or spill liquids on the device.
Maintenance
• Please contact professional service personnel for maintenance services.
• Do not insert any sharp or pointed object into the device. Do not drop or collide with other objects, this may cause
damages.
2. Statements
a. Intellectual property right statement: The hardware design and software of this product are covered by the
patents. Anyone who reproduces this product or the content of the instruction without the authorization of the
Company shall assume legal liabilities.
b. This instruction is provided for reference only, and the functions shown in the manual may dier from the actual
functions of the product the customers actually purchase and receive.
c. The picture is for reference only. Please reference the actual product. The Company reserves the rights to improve
and change the appearance and design of the product without notice.
d. The actual screen sharing status depends on the real WiFi environment and your mobile device’s WiFi ability, a
better WiFi connection will result in a faster connection from transmitter to the monitor.
3. Pairing
2.4GHz/5GHz
300Mbps
WIRELESS
USB
ADAPTER
Transmitter
Receiver
1. Connect the transmitter and the receiver to
dierent USB ports on the Interactive Flat Panel
(IFP) to pair.
2. After pairing connect the transmitter to a USB port on
your computer. Find the Screen Share Pro icon in a File
Explorer window (PC) or Finder window (Mac) and allow
Screen Share to run the software and wait for The Screen
Share to connect
3. Press the button on the top of the transmitter to begin
screen mirroring
* Your computer should be connected to the same WiFi
signal as the wireless transmitter. If not, the device
may not work properly

4. Transmitter Indicator Light
a. Blinking: Transmitter is connecting to the IFP
b. Solid: The transmitter is connected to the IFP and screen mirroring is set up
c. Low brightness: Mirroring
5. Troubleshooting
If the system fails to connect please try the following
1. Check that the ScreenShare Pro receiver is running properly on the IFP
2. Check that the ScreenShare Pro receiver is properly connected to the IFP and the transmitter is properly
connected to your computer
3. Check if you are running on the same WiFi signal as the IFP.
4. Try pairing the receiver and transmitter again
6. Specications
• Supported Operating Systems: Windows 7/8/8.1/10, Mac OSX 10.9/10.10/10.11
• Operating Frequency: 2432MHz, 5180 MHz
• Input Power: 5V-DC
• Overall Power Consumption: 2.5W
• Overall Dimensions (LxWxD): 77 x 178.7 x 21.3 mm
7. Package Includes
• Wireless transmitter
• USB receiver
• User Manual
8. Warnings
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation
Changes or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
o and on, the suer is encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocated the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected
• Consult the dealer or an experienced TV/radio technician for help
The device for operation in the 5180 MHz is only for indoor use to reduce the potential for harmful interference to
co-channel mobile satellite systems
8. Warnings
FCC RF Radiation Exposure and SAR Statements SAR Statement The Wireless Screen Mirroring has been tested
for body-worn Specic Absorption Rate (SAR) compliance. The FCC has established detailed SAR requirements
and has established that these requirements: RF Exposure Information. The radio module has been evaluated
under FCC Bulletin OET 65C (01-01) and found to be compliant to the requirements as set forth in CFR 47 Sections,
2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices. This model meets the applicable
government requirements for exposure to radio frequency waves. The highest SAR level measure for this device
was 0.085 W/kg.

www.V7world.com
V1-20190613