Vacron VIH Series User manual

- 1 -
VIH Series
IP Camera
User’s Manual
V_1.0

- 2 -
Contents Table
Over View ........................................................................................................................................................ 1
Installation ....................................................................................................................................................... 2
Live View ........................................................................................................................................................ 9
Setup ............................................................................................................................................................. 10
4.1 Status........................................................................................................................10
4.2 Network.....................................................................................................................11
4.3 Stream.......................................................................................................................12
4.4 Imaging .....................................................................................................................13
4.5 Security.....................................................................................................................14
4.6 Time ..........................................................................................................................15
4.7 Alarm.........................................................................................................................16
4.8 System......................................................................................................................17
Appendix A – IPSearcher for searching IP Camera on LAN .................................................................. 18

- 1 -
Over View
Features
1.3 megapixel CMOS Sensor
Real-time H.264
Built-in high sensitive microphone for Box/Bullet series
Supports ONVIF Standard to Simplify Integration and Enhance Interoperability
Supports H/W Watchdog
CMS Camera Management Software
You can install CMS on a PC to management your IP Camera, please refer to “CMS User’s
Manual-V1.0.pdf”.

- 2 -
Installation
Minimum PC Requirement
Hardware:
Intel○
R
Pentium○
R
DUA Core
TM
2 GB system memory or above
Sound Card: DirectX○
R
9.0c compatible sound card
Video Card: 3D hardware accelerator card required – 100% DirectX○
R
9.0c compatible
Ethernet network port/card
Software:
Windows○
R
XP Service Pack 2 or above
Resolution of screen setting: 1280x960 or higher for the display of 720P
Change computer’s IP address – Please set IP address to be “192.168.0.3”.
(You can also searching IP Camera with IPSearcher, please refer to appendix A)
Click [Start-> Control Panel]
Click [View network status and tasks]

- 3 -
Click [Change adapter settings]
Double Click [Local Area Connection]
Click [Properties]

- 4 -
Double click [Internet Protocol Version4(TCP/IPv4)]
Select [Use the following IP address] and enter IPAddress, Subnet mask and
Default gateway then press [OK].


- 5 -
Login IP Camera with a WEB browser
You may visit IPCamera’s homepage by IE.
Running a browser and enter IP Camera’s IP- 192.168.0.118 in URI.
Default account: admin
Default password: admin
It displays Live Video after you login IP Camera.

- 6 -
If this is the first time yo connect to IPCamera, it will ask yo install ActiveX○
R
add-on. If there is
no pop- p message, please change sec rity settings for IE.

- 7 -
You may need to change security parameter for Live View Player playing video well.
Enter [Control Panel] then click [View network status and tasks].
Click [Internet Options].

- 8 -
Enter [Security] page then click [Custom level].
Set [Download unsigned ActiveX controls] to be [Prompt].